Kimball Office Itsa K38AA Guide

Kimball Office Itsa Adjustment Instructions
!
www.kimballoffice.com 1600 Royal Street Page - 1 -
800.482.1818 Jasper, IN 47549
Model: K38AA & K38CC (Knee Tilt - 1.0 & 2.0 models)
Height Adjustment
1. Handle is located under seat on right side as seated towards the front of the chair. Pull up on handle
to adjust seat height. Release the handle when desired height is attained.
Tilt/Tilt Lock
1. Handle for tilt lock is same handle as the height adjustment handle, again, under right side of seat.
Push this handle in to lock the chair from tilting and pull it out to allow the chair to tilt. When pushing
this handle in and pulling it out a click can be heard to help indicate it is in either position.
Tilt Tension
1. When chair is in tilting mode, the tension knob can adjust the tension to fit occupant's size. This knob
is a large black plastic knob and located under the center of the seat towards front. Turning the knob
counter clockwise will increase the tension and clockwise will decrease the tension.
Seat Slide (for seat slide models only)
1. Handle for seat slide option is located under seat on the left side towards the front. To operate the
seat slide, pull lever up while manually adjusting the seat depth. When the desired seat depth is
attained, release the adjustment handle and the chair will lock into that position. Note that the seat
slide mechanism is spring loaded to assist the seat in moving backward toward the chair back.
Non-Seat Slide Control
One Handle
Seat Slide Control
Two Handles

Kimball Office Itsa Adjustment Instructions
!
www.kimballoffice.com 1600 Royal Street Page - 2 -
800.482.1818 Jasper, IN 47549
Model: K38BB & K38DD (Synchronous - 1.0 & 2.0 models)
Height Adjustment
1. Handle is located under seat on right side as seated toward the front. There are two knobs in this
location, one round and one, in front of the round one. The flat one is for seat height adjustment. Pull
up on the flat handle to adjust the seat height. Release the handle when desired height is attained.
Tilt/Tilt Lock
1. The tilt lock lever is located on under the left side of the seat as seated toward the front It is a round
plastic knob which has two positions, locked and unlocked. Turn it clockwise for the locked position
and counterclockwise for the unlocked position.
Tilt Tension
1. This is the round plastic knob under the right side of the chair as seated. Turn it clockwise to increase
the tension and counterclockwise to decrease the tension. This knob can be pulled out for adjustment
or pushed in for adjustment, either way.
Seat Slide (for seat slide models only)
1. On seat slide models there is a round and a flat handle on both sides under the seat. The seat slide
handle is the flat handle under the left side of the seat as seated.
2. To operate the seat slide, pull this lever up while manually adjusting the seat depth. When the desired
seat depth is attained, release the adjustment handle and the chair will lock into that position. Note
that the seat slide mechanism is spring loaded to assist the seat in moving backward toward the chair
back.
Non-Seat Slide Control
Two Round Knobs, One Flat Handle
Seat Slide Control
Two Round Knobs, Two Flat Handles