Kimball Office Aspire User manual

Tables Assembly Instructions
Aspire®Page 1 of 2
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Office Customer Care.
Part No. 1741648 Revision B-05
Field Install Bolt
To Lock Static Leg
Tools Required
■#5 Hex Driver ■Adjustable Wrench
Package Contents
■1 Table/Frame Assembly ■4 Bolts
■4 Casters or Glides
Installation
1. Place table assembly face down on a smooth, solid surface.
Be careful not to mar the worksurface. (Figure A).
2. Rotate one leg assembly to the vertical position and align
the holes in the leg assembly with the holes in the table
frame. Screw in one machine screw on each side to secure
legs. (Figure B).
3. Repeat Step 2 to secure second leg assembly. (Figure C).
Figure A
Figure B
Rotate
upward
Leg assembly
Align holes
Figure C
Leg assembly
Rotate
upward
Align holes

Tables Assembly Instructions
Aspire
Printed in U.S.A. © 2005 Kimball International, Inc. T 800.482.1818 F 812.482.8300
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Office Customer Care.
Part No. 1741648 Revision B-05
Page 2 of 2
Installation (continued)
4. Attach glides or casters to legs. Glides and casters screw in.
Firmly tighten all bolts on table frame. (Figure D).
5. Carefully turn table to upright position. (Figure E).
Figure D
Figure E
Tighten all bolts