kingsley-bate Adirondack AK25 User manual

Kingsley-Bate
AK25 Adirondack Chair
Assembly Instructions

KINGSLEY – BATE
Fine Garden Furniture
ASSEMBLY INSTRUCTIONS FOR THE AK - 25
STEP-I
Unpack, inspect and lay all the parts on
a clean, flat soft surface to avoid
marring the wood.
NOTE: During assem bly of the
furniture please match all the joints with
BACK SEAT the corresponding letters or numbers
stamped on the furniture.
RIGHT END FRAME LEFT END FRAME
STEP II :
Assemble SEAT to BACK us ing the long knock down bolts
provided.
STEP III :
Carefully set the SEAT/BACK assem bly on
its side and attach the END FRAME that has
the numbers or letters stam ped on it to the
corresponding side of the SEAT/BACK
assembly. Attach the END FRAME to the
top of the back stretcher and to the SEAT
using the threaded bolts, brass tubes and nuts
as shown in the assem bly diagrams. Fit the
remaining END FRAME to the opposite side
of the SEAT/BACK assem bly in the sam e
way.

Tighten the nuts to the bolts using a
proper screw driver and the enclosed
allen wrench
IF YOU HAVE QUESTIONS REGARDING THE ASSEMBLY OF YOUR
KINGSLEY-BATE FURNITURE, PLEASE CONTACT THE KINGSLEY-BATE
DEALER NEAREST TO YOU OR KINGSLEY-BATE DIRECTLY. WE THANK YOU
FOR CHOOSING OUR FURNITURE.
* KINGSLEY-BATE, LTD. WILL NOT TAKE RESPONSIBILITY FOR DAMAGES
IF THESE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY.
7200 Gateway Court, Manassas, Virginia 20109
Phone: [phone], Fax: [phone]