kingsley-bate Amalfi Ottoman AM10 User manual

Kingsley-Bate
AM10 Amalfi Ottoman
Assembly Instructions

KINGSLEY – BATE
Fine Garden Furniture
0ASSEMBLY INSTRUCTIONS FOR THE AM - 10
END FRAME SEAT END FRAME
*NOTE
A TENON
B MORTISE HOLE
STEP-I
Unpack, inspect and lay the parts on a clean, flat, soft surface to avoid marring the wood.
NOTE: During assembly of the furniture pleas e match all joints with the corresponding
letters or numbers stamped on the furniture.
STEP-II
Find the END FRAME with the numbers or letters
stamped on it and lay it down first. Fit the SEAT
tenons into the END FRAME mortise holes as shown
in the photo. Also fit th e FRAME STRETCHER into
the same END FRAME.
STEP-III
Carefully fit the rem aining END FRAME m ortise
holes over all the exposed tenons.
STEP-IV
Hammer the dowels into all the pre- drilled holes of the assem bly as
shown in the photo. Use the sanding block between the hammer and the
dowels for the last few blows to prevent marring of the wood. DO NOT
FORCE DOWELS ANY PROTRUDING DOWEL CAN EASILY BE
SANDED DOWN.
IF YOU HAVE ANY QUESTIONS REGARDING THE ASSEMBLY OF YOUR
KINGSLEY-BATE FURNITURE, PLEASE CONTACT THE KINGSLEY-BATE
DEALER NEAREST TO YOU OR KINGSLEY-BATE DIRECTLY. WE THANK YOU
FOR CHOOSING OUR FURNITURE.
* KINGSLEY-BATE WILL NOT TAKE RESPONSIBILITY FOR DAMAGE
1 IF THESE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY
7200 Gateway Court, Manassas, Virginia 20109
Phone: [phone], Fax: [phone]