kingsley-bate AM05 User manual

Kingsley-Bate
AM05 Amalfi Club Ottoman
Assembly Instructions

KINGSLEY–BATE
Fine Garden Furniture
0ASSEMBLY INSTRUCTIONS FOR THE AM-05
LEG SEAT LEG
*NOTE
A TENON
B MORTISE HOLE
STEP-I
Unpack, inspect and lay the parts on a clean, flat, soft surface to avoid marring the wood.
NOTE: During assembly of the furniture please match all joints with the corresponding letters
or numbers stamped on the furniture.
STEP-II
Find the LEG with num bers or letters on it and lay it down
first. Fit the SEAT& BOTTOM LEG STRETCHER tenons
into the LEG m ortise holes as shown in the photos. If
necessary, gently rock the parts while pushing the tenons
into the m ortise holes until joints fit snugly together. You
may also use a rubber m allet or a hammer with a block of wood between the ham mer and the
wood to carefully drive joints together.
STEP-III
Using a hammer, drive the dow els into place with direct,
sharp blows; be careful not to m ar the wood. Any
protruding dowels can easily be sanded away. DO NOT
FORCE DOWELS FURTHER THAN THEY WANT TO
GO.
IF YOU HAVE ANY QUESTIONS REGARDING THE ASSEMBLY OF YOUR
KINGSLEY-BATE FURNITURE, PLEASE CONTACT THE KINGSLEY-BATE DEALER
NEAREST TO YOUR OR KINGSLEY-BATE DIRECTLY. WE THANK YOU FOR
CHOOSING OUR FURNITURE.
* KINGSLEY-BATE WILL NOT TAKE RESPONSIBILITY FOR DAMAGE
1IF THESE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY
7200 Gateway Court, Manassas, Virginia 20109
Phone: [phone], Fax: [phone]