kingsley-bate Ibiza IB20 User manual

Kingsley-Bate
IB20 Ibiza Side Table
Assembly Instructions

Fine Garden Furniture
0ASSEMBLY INSTRUCTIONS FOR THE IB-20
END FRAME RAILS END FRAME
STEP-I
Unpack, inspect and lay the parts on a clean, flat, soft surface to avoid
marring the components.
NOTE: During assem bly of the furniture please m atch joints with the
corresponding letters or numbers marked at the assembly points.
TABLE TOP
STEP-II
Gently lay the END FRAME with the
markings near the joints on a clean,
flat surface and fit the RAILS on to it
as shown in the assem bly photos.
*Secure with the hex bolts provided
but DO NOT fully tighten until the
TABLE TOP is attached.
STEP-III
Set the TABLE TOP face down on a clean, smooth
surface and match the marki ngs at the corners to
those of the assembled table frame; secure with the
screws provided. Use a proper hand held
screwdriver as a power screwdriver m ay damage
the item. Finally, tighten all hex bolts with the allen
key provided.
1IF YOU HAVE ANY QUESTIONS REGARDING THE ASSEMBLY OF YOUR
2KINGSLEY-BATE FURNITURE, PLEASE CONTACT THE KINGSLEY-BATE DEALER NEAREST TO
YOU OR KINGSLEY-BATE DIRECTLY. WE THANK YOU FOR CHOOSING OUR FURNITURE.
* KINGSLEY-BATE WILL NOT TAKE RESPONSIBILITY FOR DAMAGE
IF THESE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY
7200 Gateway Court, Manassas, Virginia 20109
Phone: [phone], Fax: [phone]