kingsley-bate Montauk Sofa MK-80 User manual

ASSEMBLY INSTRUCTIONS FOR THE MK-80
RIGHT LEFT END FRAME SEAT INSERT
SEAT FRAME BACK
* NOTE
A TENON
B MORTISE HOLE
HARDWARE
STEP-I
Unpack, inspect and lay the parts on a clean, flat, soft surface to avoid marring the wood.
NOTE: During assembly of the furniture please match joints with the corresponding letters or
numbers stamped on the wood.
STEP-II
Gently lay the END FRAME with the
stamps near the mortise holes on a
clean, flat surface and fit the BACK
and SEAT FRAME tenons into the
END FRAME mortise holes. If
necessary, gently rock the parts while
pushing down on them until all the
joints fit snugly together.
As shown in the photos above, carefully fit the remaining END FRAME mortise holes over all
exposed tenons and using a rubber mallet or a regular hammer with the wood block between
the hammer and the wood, gently drive all the mortise holes onto the tenons until all joints fit
snugly together.

STEP-III
Insert all hardware and tighten with
Allen key provided.
STEP-IV
Requires two people. With the assistance of a second
person, lift the sofa up, rotate it so it’s upside down and
gently set it on your clean flat surface. DO NOT roll
sofa over as the joints are not designed to take the
entire weight of the sofa this way. Once upside down,
carefully hammer the proper dowels into the pre-drilled holes of the assembly. Details are
shown in photographs and all dowels (and/or dowel bags) are marked to match where they go.
To prevent marring the wood, use the wood block between the dowel and the hammer head
for the last few blows. NOTE: DO NOT FORCE THE DOWELS; ANY EXCESS CAN
EASILY BE SANDED AWAY. IF THE DOWELS ARE NOT FLUSH, DO NOT
CONTINUE TO DRIVE THE DOWELS, YOU MIGHT DAMAGE THE ITEM.
Place the SEAT INSERT into SEAT FRAME as shown in photograph
IF YOU HAVE ANY QUESTIONS REGARDING THE ASSEMBLY OF YOUR
KINGSLEY BATE FURNITURE, PLEASE CONTACT KINGSLEY BATE CUSTOMER
SERVICE AT 703-361-7000. WE THANK YOU FOR CHOOSING OUR FURNITURE.
* KINGSLEY BATE WILL NOT TAKE RESPONSIBILITY FOR DAMAGE
IF THESE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY
7200 Gateway Court, Manassas, Virginia 20109
Phone: [phone], Fax: [phone]