kingsley-bate Tiburon TB38 User manual

Kingsley-Bate
TB38 Tiburon 38" Square Dining Table
Assembly Instructions

KINGSLEY–BATE
Fine Garden Furniture
0ASSEMBLY INSTRUCTIONS FOR THE TB-38/76
TABLE TOP HARDWARE LEGS
STEP-I
Unpack, inspect and lay the parts on a clean, flat, soft surface to avoid marring the wood.
STEP-II
Match numbers stamped on the LEGS to the
corresponding numbers stamped on the corner braces of
the TABLE TOP, insert the LEGS into position as shown
in the assem bly photos. Slid e the split washers followed
by the solid washers over the threads and secure with the nuts by hand until they stop.
STEP-III
Using a proper wrench, tighten the nuts slowly. Please take care not to over
tighten as it may damage the item. Tighten until legs do not wobble. You
should always upright the table with 2 people, tilting the table on its side
and putting the weight on 2 legs to upright could cause damage to the table.
Lift table straight up, flip over and then set it down.
IF YOU HAVE ANY QUESTIONS REGARDING THE ASSEMBLY OF YOUR
KINGSLEY-BATE FURNITURE, PLEASE CONTACT THE KINGSLEY-BATE DEALER
NEAREST TO YOUR OR KINGSLEY-BATE DIRECTLY. WE THANK YOU FOR
CHOOSING OUR FURNITURE.
* KINGSLEY-BATE WILL NOT TAKE RESPONSIBILITY FOR DAMAGE
1IF THESE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY
7200 Gateway Court, Manassas, Virginia 20109
Phone: [phone], Fax: [phone]