kingsley-bate Essex TR19 User manual

Kingsley-Bate
TR19 Essex 20" Round Side Table
Assembly Instructions

KINGSLEY – BATE
Fine Garden Furniture
0ASSEMBLY INSTRUCTIONS FOR THE TR - 19
LEGS TABLE TOP LEG STRETCHER
1STEP-I
Unpack, inspect and lay the parts on a clean, flat, soft surfa ce to avoid
marring the wood.
NOTE: During assembly of the furniture please match all joints with the
corresponding letters or numbers stamped on the furniture.
2*NOTE:
5A TENON
6B MORTISE HOLE
3STEP-II
Fit one LEG onto the LEG STRETCHER. Carefully slide the secon d
opposing LEG onto the LEG STRE TCHER. Tenons of the LEG
STRETCHER will be stam ped with a number or letter to correspond
with their respective mortise holes on the LEG.
NOTE: DO NOT DOWEL AT THIS TIME.
4STEP-III
Lay the TABLE TOP on a soft surface with the
apron facing up. Fit the assem bled LEGS and
LEG STRETCHER onto the TABLE TOP. Slide
the other two LEGS onto the LEG STRETCHER
and the TABLE TOP. Using a rubber mallet or a
regular hammer with a wood bl ock between the hammer and th e wood, gently tap all the
LEGS until all the joints fit snugly together.

STEP-IV
Drive the wooden dowels through the tenons
of the LEGS using direct sharp bl ows from a
hammer. To avoid marring t he wood please
use a block of wood between the dowel head
and the hammer head for the last few blows.
Do not force dowels, any excess can easily be
sanded away.
IF YOU HAVE ANY QUES TIONS REGARDING THE ASSEMBLY OF YOUR
KINGSLEY-BATE FURNITURE, PLEASE CONTACT THE KINGSLEY-BATE
DEALER NEAREST TO YOU OR KINGSLEY-BATE DIRECTLY. WE THANK YOU
FOR CHOOSING OUR FURNITURE.
*KINGSLEY-BATE WILL NOT TAKE RESPONSIBILITY FOR DAMAGE IF THESE
INSTRUCTIONS ARE NOT FOLLOWED PROPERLY.
7200 Gateway Court, Manassas, Virginia 20109
Phone: [phone], Fax: [phone]