kingsley-bate MC-30 User manual

KINGSLEY–BATE
Fine Garden Furniture
ASSEMBLY INSTRUCTIONS FOR THE MC-30
RIGHT END FRAME SEAT INSERT LEFT END FRAME
BACK SEAT FRAME
STEP-I
Unpac , inspect and lay the parts on a clean, flat, soft surface to avoid marring the wood.
NOTE: During assembly of the furniture please match joints with the corresponding letters
or numbers stamped on the wood.
* NOTE
A TENON
B MORTISE HOLE
STEP-II
Gently lay the END FRAME with the stamps near the
mortise holes on a clean, flat surface and fit the
BACK and SEAT FRAME tenons into the END
FRAME mortise holes. If necessary, gently roc the
parts while pushing down on them until all the joints fit snugly together.
STEP-III
Carefully fit the remaining END FRAME mortise holes over all
exposed tenons and using a rubber mallet or a regular hammer with the
sanding bloc between the hammer and the wood, gently drive all the
mortise holes onto the tenons until all joints fit snugly together.
STEP-IV
Carefully hammer the proper
dowels into the pre-drilled
holes of the assembly, details

are shown in photographs and all dowels (and/or dowel bags) are mar ed to match where
they go. NOTE: DO NOT FORCE THE DOWELS; ANY EXCESS CAN EASILY BE
SANDED AWAY. IF THE DOWELS ARE NOT FLUSH DO NOT CONTINUE TO DRIVE
THE DOWELS, YOU MIGHT DAMAGE THE ITEM.
STEP-V
Place SEAT INSERT into SEAT FRAME as shown in photograph.
STEP-VI
***OPTIONAL***
Rubber glides are
provided for your items
but are not necessary.
Secure them to the
bottom of the legs using a proper, hand held screw driver. Using a power driver
might strip the head of the screw or damage the glide. Starter holes are visible
as shown in the first photograph.
IF YOU HAVE ANY QUESTIONS REGARDING THE ASSEMBLY OF YOUR
KINGSLEY-BATE FURNITURE, PLEASE CONTACT THE KINGSLEY-BATE DEALER
NEAREST TO YOU OR KINGSLEY-BATE DIRECTLY. WE THANK YOU FOR
CHOOSING OUR FURNITURE.
* KINGSLEY-BATE WILL NOT TAKE RESPONSIBILITY FOR DAMAGE
IF THESE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY
7200 Gateway Court, Manassas, Virginia 20109
Phone: [phone], Fax: [phone]