KLS Martin independant Care Vertical ES User manual

Front Cover
English
independant
Care Vertical ES
independant
Care Vertical MD
independant
Care Vertical LG
Instructions for Use
0051
90-579-52-10
Revision 01
Date of Release: 2020-12
www.klsmartin.com

2 Revision 01
Symbol Explanation
The following symbols are either part of this instruction for use and / or of the product labeling.
Safety alert symbol
CAUTION Indicates a situation which, if not avoided,
could result in minor or moderate injury.
WARNING Indicates a situation which, if not avoided,
could result in death or serious injury.
DANGER Indicates a situation which, if not avoided,
will result in death or serious injury.
Instructions for Use
Serial number
Date of manufacture
Manufacturer
Distributor
0051 CE marking of conformity
Type B applied part
Protective earth (ground)
Do not dispose this product into the ordinary municipal waste.
Supply voltage
110-120 220-230 V
50/60 Hz
Type of power supply and frequency
xxxVA (each electrical
outlet) Power consumption of each electrical socket

Revision 01 3
N
L
Neutral
Line
F1, F2, F3, … Fuse identification as per electrical diagram (where applicable)
SOCKET 1, SOCKET 2, … Socket identification as per electrical diagram (where applicable)
xxxVA (lighting) Power consumption of each light
Correct Configuration
Key required
Inlay shape diameter
Click
Light off/on
Tighten screw/nut
Adjustable height
Maximum Load Capacity
Rotate to Lock/Unlock

independant Care Vertical
Instructions for Use
4Revision 01
Table of Contents
1 General Information....................................................................................................................................5
1.1 Manufacturer .....................................................................................................................................5
1.2 Hotline................................................................................................................................................5
1.3 Terms & Acronyms.............................................................................................................................5
2 General Safety Warnings.............................................................................................................................6
3 Intended Use ...............................................................................................................................................8
4 Configuration...............................................................................................................................................9
5 Screw Torques .............................................................................................................................................9
6 Functioning................................................................................................................................................10
7 General and technical features .................................................................................................................14
7.1 General Features..............................................................................................................................14
7.2 Technical Specification.....................................................................................................................14
8 Cleaning and Maintenance........................................................................................................................15
8.1 Recommended Maintenance...........................................................................................................15
8.2 Cleaning............................................................................................................................................15
9 Carriage, Storage and Disposal..................................................................................................................16
10 FAQ & Troubleshooting.............................................................................................................................16
10.1 FAQ...................................................................................................................................................16
10.2 Troubleshooting...............................................................................................................................16
11 Electromagnetic Interference Tables ........................................................................................................17
12 Maintenance Log Book..............................................................................................................................19

independant Care Vertical
Instructions for Use
Revision 01 5
1General Information
1.1 Manufacturer
We thank you for buying one of our products.
This product bears the CE mark. This means that it meets the basic requirements on the safety and the
performance of medical devices set forth by the respective applicable European regulations.
We are the manufacturer of this product:
LM Medical Division s.r.l.
Via Brigate Alpine 9
25036 Palazzolo sull’Oglio
Brescia–Italy
Phone [phone]
1.2 Hotline
Should you have any questions on how to handle the device or product or use it for clinical applications,
please do not hesitate to contact the Product Management:
Phone: [phone]
Fax: [phone]
In case of technical questions and questions regarding maintenance contracts and training, please contact
our Martin Service Center:
Phone: [phone]
Fax: [phone]
E-mail: [email protected]
To answer your technical questions as efficiently as possible, our service technicians require the serial
number of the product. Therefore, please have this nu
mber at hand when contacting our hotline. The
serial number is indicated on the rating plate
.
1.3 Terms & Acronyms
Designation Description
EMC Electromagnetic Compatibility
MD Medical Device
UDA Medical Supply Units

independant Care Vertical
Instructions for Use
6Revision 01
2General Safety Warnings
The following warnings concern the medical device general functioning.
MD use must be done only after having read all sections of the current operating instructions.
•Please follow all warnings in these instructions for use and in the enclosed MD's.
Risk of injury
due to explosion!
•
Don’t use UDA in areas where flammable gases, combustible materials or explosives can be found.
Risk of injury due to unqualified installation!
UDA installation must be done following indication listed on manufacturer installation
manual. Electrical
connection must be done following the manufacturer electrical scheme.
Gas outlet distribut
ion must be done by qualified personnel according to EN 7396-1 and EN 7396-2
regulations. Distribut
ion medical gas system must be tested and prewired before delivery.
UDA is not sterilizable.
Risk of injury due to spare parts not authorized by the manufacturer!
•
Please make sure to replace damaged parts with original parts only.
•
Please replace damaged screws with new ones with the same specification.
Risk of injury due to electrical shock
!
UDA may contain electrical current.
•
Please don’t open system housing.

independant Care Vertical
Instructions for Use
Revision 01 7
Risk of injury due to electrical shock!
•
Before connecting UDA to the main power supply, pay attention to tension and frequency displayed on
label.
Uda must be protected by circuit braker differential switch.
Risk of injury due to electrical shock!
To avoid electric shock danger, UDA must be wired with grounded connection.
Risk of injury due to electrical
shock!
About UDA’s connection, regardless any kind or combinations of devices, please don’t exceed the
electrical power UDA was made for, which can be found on the labels applied on the plate.
•
Please don’t connect adapters between the device’s electrical sockets and plugs.
Risk of injury due to system parts falling down!
•
Please don’t overload UDA’s max load, listed on the related label.
Risk of injury due to unauthorized use!
UDA must not be tempered with or used differently from the intended use.
Risk of injury due to unauthorized maintenance work!
The user is not allowed to replace UDA’s components. This operation must be done by authorized
personnel only.
•
In order to replace worn-out parts, please follow the maintenance instructions carefully.
Damaged UDA removal must be don
e by authorized personnel only.
•
Before removing the UDA, remove the power supply using the protection switch on the general panel
and ask qualified personnel to replace the UDA.

independant Care Vertical
Instructions for Use
8Revision 01
Risk of injury due to
unauthorized use of outlets!
Connecting an electrical appliance to multiple outlets to create an RM system which may result in a
reduced level of safety.
The UDA should not be used near other equipment.
3Intended Use
UDA’s pendant models independant Care are manufactured for medical use areas only, in order to allow:
•Electrical current flow;
•Data (nurse calling system, phone, PC network)
•Medical gas outlet, AIR, VAC
•Anesthetic gas
And supporting
•Diagnostic devices
•Therapy devices
•Surgery devices
These medical devices are built in order to obtain an all in one pendant device which can provide all
functions and needs of intensive care, recovery rooms.

independant Care Vertical
Instructions for Use
Revision 01 9
4Configuration
independant Care Vertical ES independant Care Vertical MD independant Care Vertical LG
5Screw Torques
Dimension Torques
M5 Nm 7
M6 Nm 12
M8 Nm 30

independant Care Vertical
Instructions for Use
10 Revision 01
6Functioning