Kohler SKYLINE K-22317T-FM-S User manual

-1-
BEFORE YOU BEGIN 安装之前
© Copyright Kohler China Investment Co., Ltd. 2018
© 版权为科勒（中国）投资有限公司所有2018
ZHONGSHAN KOHLER SHOWER CO., LTD. NO13-1, XINGYE ROAD, ZHONGSHAN TORCH
DEVELOPMENT ZONE, ZHONGSHAN, GUANGDONG, CHINA POST CODE: 528437
中山科勒卫浴有限公司 广东省中山市中山火炬开发区兴业路 13-1 号邮编：528437
• 说明书中所有的资料是按最新出版的产品资料编写而成。
科勒中国有限公司保留任何时候无须通知即可改变产品特
性、包装或产品可供类型的权利。
• 说明书包括重要的安装、清洁及保养方面的内容，请把这
些资料交给用户阅读，保管。
• 确保在安装淋浴房之前已经完整正确地安装了浴室和完工
墙面材料。淋浴区墙地面应做防水处理，并不得布置有电
器开关、插座。确保地面排水通畅。
• 在进行淋浴房安装之前，请拿出、排列并确认所有的零部
件。请参考第 2 页上所示的分解图。
• 对尺寸与本标准产品不同的定制淋浴房，参照本说明书进
行安装。
• 本产品符合 QB 2584-2007。
• All information is based on the latest product information
available at the time of publication. Kohler China Ltd.
reserves the right to make changes in product
characteristics, packaging, or availability at any time
without notice.
• These instructions contain important care, cleaning, and
warranty information-please leave these instructions for
the consumer.
• Make sure that the bath and the finished wall material are
completely and correctly installed prior to installing your
shower door. Prepare waterproof layer to wall and floor of
the showering area. It is not allowed for any presence of
electric switches and sockets. Make sure the floor drain
runs smoothly.
• Before starting the door installation, lay out and identify all
the parts. Use the exploded view illustrated on page 2 for
reference.
• For the installation method of customized shower with
different dimensions, please refer to this instructions.
• The product complies with QB 2584-2007.
警告：可能有人员伤害或者产品损坏的危险。
钢化玻璃不能进行切割，钻孔或硬物敲击。搬移或安装
过程中，小心确保玻璃边、角部位不受撞击，以防爆裂
伤人。
建议：将本产品安装在科勒淋浴盆或挡水条上（需另行购买）。
如自备挡水条，建议顶面宽度尺寸大于 80mm。
重要事项：淋浴房需要安装在平坦垂直的墙面上。墙面的垂直度
推荐在正负 3mm/m 以内。如果超出此范围，科勒公司将不保证
淋浴房的完美使用。
CAUTION: Risk of injury or product damage.
Tempered glass cannot be cut, drilled or knocked by
hard object. Make sure corner area of the glass
refraining from knocking so as to cause personal injury
due to broken glass.
ATTENTION: Please install this door on Kohler receptors or
curbs(Not included). If the curb is not Kohler-branded, please
note its top width should be more than 80mm.
IMPORTANT: The shower door requires a flat vertical
finished wall. The squareness of the wall is recommended no
more than 3 mm/m. KOHLER Company won't take
responsibility of the installation quality.
24hrs
ROUGHING-IN 尺寸图
Unit: mm
单位：毫米
Do not use the enclosure for at least 24 hours.
安装后 24 小时内请勿使用淋浴房。
SKYLINE 新乐
INSTALLATION INSTRUCTIONS
安装说明书
SLIDING, SS, SCR BP, W STO, W/SC, 10mm
不锈钢移门淋浴房，一字型双移门（可配博纳置物架），缓冲，防爆贴膜玻璃，10mm
K-22317T-FM-S
SLIDING, SS, SCR BYPASS(W STO), 10mm
不锈钢移门淋浴房，一字型双移门（可配博纳置物架），防爆贴膜玻璃，10mm
K-701531T-FM-S
SLIDING, SS, SCR BYPASS(W STO), 8mm
不锈钢移门淋浴房，一字型双移门（可配博纳置物架），防爆贴膜玻璃，8mm
K-701537T-FM-S
SKU B H
K-22317T
1850-2200
1450-2000
1250-2000
K-701531T
K-701537T
1372200-T01-A

Tools Required/所需工具
5mm Allen Key
5mm 六角扳手
2.5mm Allen Key
2.5mm 六角扳手
Masonry Drill &
6mm Drill Bit
冲击钻以及
6mm 冲击钻头
Pencil
铅笔
Level
水平仪
Measuring Tape
卷尺
Phillips Screwdriver
十字螺丝刀
Hammer
锤子
Knife
刀片
Caulk Gun
硅胶枪
Safety Goggles
护目镜
-2-
X2
X2
X2
X4
X8
X10
X1
X1
X1
X1
X1
X1
X1
X2
X4
X4
X2
X1
X4
Top Rail, Skyline SS, Bypass
新乐双移门上轨道
Bottom Rail, Skyline SS, Bypass
新乐双移门下轨道
Wall Jamb, Skyline SS, Bypass
新乐双移门墙材
SS Wall Jamb, RH, 1P2D
固玻中柱
Insert Seal, Skyline SS, Bypass
新乐双移门嵌入胶条
Side Metal Handle, Skyline
新乐单装拉手
Top Softclose Roller Assy, Skyline SS, Bypass
新乐缓冲上轮组
Softclose Block SS Bypass
缓冲锁块
Bottom Rail,
Skyline SS, Bypass
新乐双移门下轨道
Long Bottom Roller Assy,
Skyline SS, Bypass
新乐下轮组--长
Side Metal Handle,
Skyline
新乐单装拉手
Short Bottom Roller Assy,
Skyline SS, Bypass
新乐下轮组--短
Wall Jamb, Skyline SS, Bypass
新乐双移门墙材
Door Glass,
Skyline SS, Bypass
新乐双移门门玻
Front Panel Glass
新乐双移门固玻
Softclose Block SS Bypass
缓冲锁块
Top Rail, Skyline SS,
Bypass
新乐双移门上轨道
Wall Top Cap,
Bypass SS Skyline
双移门顶盖
Top Softclose Roller Assy,
Skyline SS, Bypass
新乐缓冲上轮组
Insert Seal,
Skyline SS, Bypass
新乐双移门嵌入胶条
Long Bottom Roller Assy, Skyline SS, Bypass
新乐下轮组--长
Short Bottom Roller Assy, Skyline SS, Bypass
新乐下轮组--短
Bottom Center Post Fixture of the Panel Glass
固玻中柱下固定件
Top Center Post Fixture of the Panel Glass
固玻中柱上固定件
2D1P Connector, Bypass, SS, Skyline
下轨道固定座
Wall Top Cap, Bypass SS Skyline
双移门顶盖
Hollow Wall Anchor, Nylon
膨胀套
Screw Key 3mm
内六角扳手
Screw Key 2mm
内六角扳手（加长）
1372200-T01-A
Screw M4X10
十字不锈钢沉头机制 M4X10
Pan Screw GB/T 845 ST3.5X40
圆头螺丝 ST3.5X40
K-22317T
X1 Adjustable Wrench
调节扳手

Tools Required/所需工具
5mm Allen Key
5mm 六角扳手
2.5mm Allen Key
2.5mm 六角扳手
Masonry Drill &
6mm Drill Bit
冲击钻以及
6mm 冲击钻头
Pencil
铅笔
Level
水平仪
Measuring Tape
卷尺
Phillips Screwdriver
十字螺丝刀
Hammer
锤子
Knife
刀片
Caulk Gun
硅胶枪
Safety Goggles
护目镜
-3-
X2
X2
X2
X4
X8
X10
X1
X1
X1
X1
X1
Bottom Rail,
Skyline SS, Bypass
新乐双移门下轨道
Long Bottom Roller Assy,
Skyline SS, Bypass
新乐下轮组--长
Side Metal Handle,
Skyline
新乐单装拉手
Short Bottom Roller Assy,
Skyline SS, Bypass
新乐下轮组--短
Wall Jamb, Skyline SS,
Bypass
新乐双移门墙材
Door Glass,
Skyline SS, Bypass
新乐双移门门玻
Front Panel Glass
新乐双移门固玻
SS Wall Jamb, RH, 2D1P
固玻墙材
No-rebounce
Assy, Skyline Bypass
新乐移门防反弹组件
Top Rail, Skyline SS,
Bypass
新乐双移门上轨道
Wall Top Cap,
Bypass SS Skyline
双移门顶盖
Top Assy,
Skyline SS, Bypass
新乐上轮组
Insert Seal,
Skyline SS, Bypass
新乐双移门嵌入胶条
Top Assy, Skyline SS, Bypass
新乐上轮组
No-rebounce Assy, Skyline Bypass
新乐移门防反弹组件
Bottom Center Post Fixture of the Panel Glass
固玻中柱下固定件
Top Center Post Fixture of the Panel Glass
固玻中柱上固定件
Long Bottom Roller Assy, Skyline SS, Bypass
新乐下轮组--长
Short Bottom Roller Assy, Skyline SS, Bypass
新乐下轮组--短
2D1P Connector, Bypass, SS, Skyline
下轨道固定座
Wall Top Cap, Bypass SS Skyline
双移门顶盖
Hollow Wall Anchor, Nylon
膨胀套
Screw Key 3mm
内六角扳手
Screw Key 2mm
内六角扳手（加长）
1372200-T01-A
Screw M4X10
十字不锈钢沉头机制 M4X10
Pan Screw GB/T 845 ST3.5X40
圆头螺丝 ST3.5X40
K-701531T
K-701537T
X1
X1
X2
X4
X4
X2
X1
X4
Top Rail, Skyline SS, Bypass
新乐双移门上轨道
Bottom Rail, Skyline SS, Bypass
新乐双移门下轨道
Wall Jamb, Skyline SS, Bypass
新乐双移门墙材
SS Wall Jamb, RH, 1P2D
固玻中柱
Insert Seal, Skyline SS, Bypass
新乐双移门嵌入胶条
Side Metal Handle, Skyline
新乐单装拉手
X1 Adjustable Wrench
调节扳手

INSTALLATION 安装
-4-
STEP
1
STEP
2
STEP
3
STEP
4
STEP
5
STEP
6
STEP
8
STEP
7
STEP
9
IMPORTANT:
Tray MUST be level
along front edge.
重要：
底盘必须水平。
0mm
0mm
6mm
0mm
外门玻
内门玻
Mount the handle
安装拉手
Level the weather bar. Mark the wall 5mm in from the front edge of
the tray.
档水条打水平。从挡水台边缘向内偏5mm。
Install the panel glass and the center post.
安装固玻及中柱。
Install the handle and the top cover.
安装拉手以及顶盖。
Install the seal
安装胶条
Adjust the position of the
bumper block or stopper
调节防撞块或定位锁块位置
Adjust the height of the door glass
properly
Snap in the decorative cap for the pulley
调节门玻到合适的高度后卡入吊轮装饰盖
Adjust.
调节。
Apply glass cement.
打玻璃胶。
Install the top rail.
安装上导轨。
Install the door glass. Note: The external door glass should be hung
from the inside to the outside and the internal door glass should be
hung from the outside to the inside. Both should be carried out at the
inner side of the rail.
安装门玻。注意：外门玻在导轨内从内往外挂，内门玻在导轨内从外往
内挂。
Outside
淋浴房外侧
Outside
淋浴房外
Outside
淋浴房外
Decorative cap
facing outward
装饰盖朝外
Decorative cap
facing inward
装饰盖朝内
Inside
淋浴房内
External
door glass
外门玻
Internal
door glass
内门玻
Inside
淋浴房内
Inside
淋浴房内侧
The wall jamb must
be kept vertical.
上墙材必须垂直。 The wall jamb must
be kept vertical.
上墙材必须垂直。
Draw the installation holes. Place the bottom rail at the proper position.
Make it flat. Snap the two wall jambs into the rail successively. Mark
and drill the holes into the wall. Pay particular attention to the
orientation of the wall jambs to be installed (see the enlarged figure).
画上墙孔。先摆好下导轨，打好水平后先后将两支墙材从上往下卡入下
导轨，描好定位孔后再往墙上打孔。特别注意墙材的内外方向（见放大
图）。
Fix the wall jambs. Snap two jambs into the bottom rail from the top
and then fix them onto the wall with screws.
固定上墙材。分别将两支墙材从上往下卡入下导轨后用上墙螺丝固定在
墙上。
1372200-T01-A