Kolpin Outdoors 15-7580 User manual

© 2018 Kolpin Outdoors Inc. REV 03
MID-MOUNT KIT
FOR CAN-AM ATV’s
P/N 15-7580
ASSEMBLY / OWNERS MANUAL
Application
PLOW PU H FRAME NO. 15-0070, 33-0000 or 33-0070
Before you begin, please read these instructions and check to be sure all parts and tools are
accounted for. The following instructions contain details required to install and service the contents
of this kit.

2
© 2018 Kolpin Outdoors Inc. REV 03
OPERATING INSTRUCTIONS
Congratulations! You’ve just purchased the most durable plow component in the industry. Kolpin plow components work great for
summer or winter plowing. With proper care and maintenance, your Kolpin plow system will last for years to come!
NOTICE
Pl w perati n requires
additi nal c mp nents f r perati n: Kolpin Plow
Blade, Kolpin Plow Push Frame, High Rise Plow
Push Frame, Winch Kit* and/or manual lift
Please read and understand all assembly instructions, notices and warnings before assembling and operating your Kolpin plow
system.
F ll w these guidelines t ensure satisfact ry perati n:
• Read this manual and your ATV/ UTV operators manual before use.
• Periodically check for wear and tightness of all fasteners. Replace or re-torque fasteners as necessary.
• Before first use, set plow in the furthest right or left angled position to check for interference with the vehicle.
• Operate with extreme caution on slopes and rough terrain. Be familiar with the area before you plow.
• Be aware of immovable objects that could be hidden in the area you are plowing.
• To avoid damage when pushing snow into a pile, reverse direction before raising the plow blade.
• Do not ram the plow blade into piles of snow.
• For best results, set the suspension preload of your ATV/ UTV to the stiffest setting.
• To reduce steering effort and increase mobility, set the air pressure of your tires to the maximum pressure specification.
• The plow skids are adjustable. General skid setting is even with the plow wear bar bottom edge, higher settings reduce the
chance of rocks and gravel from being collected.
• To increase traction during plow operation, operators can try: ecuring weight to the ATV/ UTV for additional tire downforce,
reducing tire air pressure, or installing tire chains.
SAFETY INFORMATION
Our plow systems were designed with your safety in mind. Please read and understand all Cautions, Notices and Warnings in this
manual before you begin. In order to protect you and your ATV/UTV, certain parts of the plow system and/or hardware are designed to
fail when the equipment is over-stressed.
DANGER
TO AVOID SERIOUS INJURY OR DEATH:
1. DO NOT EXCEED 5 MPH (8 KMH) WITH BLADE INSTALLED.
2. OPERATE WITH EXTREME CAUTION ON SLOPES, STEEP GRADES, AND ROUGH TERRAIN.
3. ALLOW NO RIDERS ON BLADE OR ATV/UTV WHILE MOVING OR STATIONARY.
4. KEEP BYSTANDERS AWAY FROM THE BLADE OR ATV/UTV WHILE MOVING OR STATIONARY.
5. WHEN PUSHING HEAVY MATERIAL, DIRECTION CONTROL MAY BECOME DIFFICULT.
6. BEFORE ADJUSTING BLADE: STOP ATV/UTV ENGINE; SET AND LOCK BRAKES; RAISE AND LOCK BLADE
IN UP POSITION. DO NOT ATTEMPT TO RAISE BLADE BY HAND; USE THE LIFT MECHANISM ONLY.
7. LOWER BLADE TO DOWN POSITION WHEN BLADE AND ATV/UTV ARE NOT IN USE.
8. READ BLADE'S INSTRUCTION SHEETS AND ATV/UTV OWNER MANUAL.
! !

3
© 2018 Kolpin Outdoors Inc. REV 03
Kit C ntents:
Item Qty Part Descripti n Part Number
11Blade Mount Weldment CYC6221
22Clevis Pin, Zinc Plated, 10mm x 35mm -
38Carriage Bolt, Zinc Plated, M8-1.25 x 25mm LG -
42ide upport Brackets 15-7580_CP01
52Top upport Plates CYC6223
68Flange Locknut, Zinc Plated, M8-1.25 -
72Hair Pin, Zinc Plated, #3 -
81Instruction Guide (not shown) -

4
© 2018 Kolpin Outdoors Inc. REV 03
BEFORE YOU BEGIN:
• Y ur K lpin access ry is exclusively designed f r
y ur vehicle
• Please read and understand all instructi ns
• Verify all parts and t ls are acc unted f r
• T ensure a satisfact ry installati n, f ll w all steps
c rrectly and in the sequence described
• Keep these instructi ns f r future reference r f r
inf rmati nal requests
• T facilitate installati n, make sure that y ur vehicle
is clean and free f debris
• All directi ns referring t right and left are when the
rider is sitting n the machine
• The plastic skid plate will need t be m dified t be
reinstalled n the vehicle
TOOLS REQUIRED:
• Basic Metric Hand Wrench and S cket Set
• T rque Wrench
• Drill r cutting t ls f r plastic
• D N t use impact t ls t install hardware
APPROXIMATE ASSEMBLY TIME: 30 minutes
N te: Rem val and m dificati n f the plastic skid plate is rec mmended.
Note: If any hardware is missing, do not return to the store. Call
us to help, Toll Free 1-877-956-5746.
SPARE KITS Hardware kit
P/N CYC6533
Item Descripti n
2Clevis Pin, Zinc Plated, 10mm x 35mm 2x
3Carriage Bolt, Zinc Plated, M8-1.25 x 25mm LG 8x
6Flange Locknut, Zinc Plated, M8-1.25 8x
7Hair Pin, Zinc Plated, #3 2x

5
© 2018 Kolpin Outdoors Inc. REV 03
M unt Installati n:
1. Loosen and temporary remove the
plastic footrest 4 fasteners on the left
side of the ATV to allow clearance for
hardware insertion.
2. Insert top plate, item #5, on top of the
left forward foot rest support as shown.
( ee Illustration 1.)
3. Install carriage bolts, item #3, from the top
down at the locations as shown. The bolts will
fit thru the top plate, item #5, holes and thru the
vehicle footrest support holes. ( ee Illustration
2).
4. For model year 2014 vehicles and older, repeat
installation of items #5 and #3 on the right
forward footrest support of the ATV.
5. For model year 2015 and newer vehicles,
follow instructions in step 6 for installation of
the top plate on the right forward footrest
support of the ATV.

6
© 2018 Kolpin Outdoors Inc. REV 03
M unt Installati n (C ntinued):
6. For 2015 and newer vehicles,
position the top plate, item #5,
onto the right footrest support as
shown. The carriage bolts, items
#3, will insert thru the hole in the
top plate. ( ee Illustration 3).
7. For ease of assembly, the lower
plastic skid plate will need to be
trimmed in locations as shown.
No t e, skid p l ate is sho wn
removed from the vehicle, this
step is best done when still
m o u n t e d t o A T V .
( ee
Illustration 4).
Front of
ATV
Item 5
ILL. 3
Item 3
ILL. 4

7
© 2018 Kolpin Outdoors Inc. REV 03
M unt Installati n (C ntinued):
8. Install side brackets, items #4, onto the
carriage bolts as shown. Fasten top
plate and side plates with lock nuts,
items #6. Do not tighten fasteners at
this time. ( ee Illustration 5).
9. Align mount weldment, item #1,
between the side brackets. Install
carriage bolts, items #3. Fasten with
lock nuts, items #6. ( ee Illustration 6.)
10. Tighten all M8 mount fasteners to
specification.
11. Re-install left footrest fasteners and
tighten to OEM specification.
12. Use clevis pins, items #2 and hair pins,
items #7, to secure the push tube to the
mount weldment. ( ee Illustration 7).
8MM FASTENER TORQUE:
17 ft. lbs. (23 Nm)
ILL. 6
Item 1
Item 6
Item 3

8
© 2018 Kolpin Outdoors Inc. REV 03
One Year Limited Warranty
For the period of one (1) year from the purchase date, Kolpin will replace for the original purchaser,
free of charge, any part or parts found upon examination by Kolpin to be defective in material,
workmanship, or both.
All transportation costs incurred submitting product to Kolpin for warranty consideration must be
borne by the purchaser. If Kolpin determines that the product must be returned to the factory for
credit, please call 1-877-956-5746 for a Return Merchandise Authorization (RMA) number and
shipping instructions.
This warranty does not apply to parts that have been damaged by accident, alteration, abuse,
improper maintenance, normal wear, or other causes beyond the manufacturer’s control. In order to
protect you and your ATV, certain parts of the accessory system and/or hardware are designed to
fail when the equipment is over-stressed. Parts that are lost due to loosening and improper
maintenance are not covered under warranty. This warranty does not cover removal or reinstallation
labor fees of the plow system and related components.
Peripheral products such as engines, electric motors, and actuators may carry an original
manufacturer’s warranty. Most hardware is general in nature and is easily obtained locally. Be sure
to replace with minimum metric class 8.8 specification.
K lpin Outd rs, Inc.
Teleph ne: (763)-478-5800
T ll Free: (877)-956-5746
Fax Number: (800)-245-7569
www.k lpin.c m
Email: cust merservice@k lpin.c m