KStrong AFX201042 Operator's manual

THESE INSTRUCTIONS APPLY TO THE FOLLOWING MODEL:
ADJUSTABLE WEBBING FOOT LOOP &
WEBBING COWS TAIL
USER INSTRUCTION MANUAL
AFX201042 and AFX201041

Please read and understand the manufacturer's instructions for each component or part of the complete system. Manufacturer's instructions must be
followed for proper use, care, and maintenance of this product. These instructions must be retained and be kept available for the user's reference at all
times. Alterations or misuse of this product, or failure to follow instructions, may result in serious injury or death.
Note: The user is advised to keep this user instructions document for the life of the product.
Adjuster
Loop for
Ascender
Connection
For Placing
the foot
Product
Ref.
Product
Name
Material of
Construction Size Product Image
Application
AFX201041
AFX201042
Webbing
Cows Tail
Adjustable
Webbing Foot
Loop
Polyester Webbing
having loops for
attachment
44 mm Polyester
Webbing
20 cms
Length easily
adjusted with the
Combination
Buckles
It is used to
anchor a victim
of fall to the
Rescuer during
rescue
Attached to the
Ascending rope
clamp for rope
ascents.
1. TECHNICAL SPECIFICATIONS:
2. INSPECTION: Visually inspect the system before each use to ensure that it is in a
serviceable condition and is operating correctly. If during inspection, doubts are raised
about the safety of the system or a component, these should be replaced either by the
manufacturer or a competent person.
3. PRECAUTIONS:
ŸEnsure the Medical condition of the user does not affect his safety in normal
and emergency use.
ŸThe equipment shall only be used by a trained and competent person for its
safe use.
ŸThe easy seat should not be re-used in the event of deformation or doubt.
ŸDo not remove, add or replace any component of the easy seat.
ŸA rescue plan shall be in place to deal with any emergencies that could arise
during the work.
ŸEnsure that the anchor is installed directly above the user's head.
ŸEnsure that the equipment is compatible with other items when assembled
into a system.
ŸIt is essential to verify free space required beneath the user at work place
before each occasion of use so that in case of a fall there will be no collision
with ground or other obstacle in the fall path.
4. HOW TO USE: The Adjustable Webbing Foot Loop:
Step 1: Connect the loop provided to hand ascender through connector.
Step 2: Adjust the length required for placing the foot (not so high nor very low)
according to the need.
Step 3: Check loading before leaving the ground by placing whole load on the
connections.
Warnings :
(i) Inspect for General Wear Tear,
(ii) Check adjuster for Proper functioning and sharp edges should not be
present.
5. HOW TO REMOVE THE ADJUSTABLE WEBBING FOOT LOOP:
Webbing Foot Loop shall be removed from service if they fail the periodic
examination or were involved in arresting any fall.
The Adjustable
If general wear and tear is
observed, then remove the product from service.
Example of
Application for
PN 402 (A)

6. LIMITATIONS:
This is not a Personal Protective Equipment (PPE).
Proper training is required before using this equipment.
Improper connections can lead to panic situation and thus can result in fall.
The Abrasion webbing is provided to protect the main webbing from getting abrased and if user observes any exposure of the main webbing from
this webbing, then it should be removed from service.
and therefore should be immediately removed from service.
Ÿ
Ÿ
Ÿ
Ÿ
7. COMPATIBILITY: To optimise protection, in some instance it may be necessary to use the anchorage sling with suitable boots / gloves/ helmet/ ear
defenders. In this case, before carrying out the risk-related activity, consult your supplier to ensure that all your protective products are compatible and
suitable for your application.
8. REPAIR: If the product is damaged, it will NOT provide the optimum level of protection,
Never use the damaged product. Repair is permitted, provided that it is either done by the manufacturer or a competent repair centre or individual
approved by the manufacturer.
9. WITHDRAWAL FROM USE: If the products have been used to arrest a fall, it should be removed from service and returned to the manufacturer or a
competent repair centre for servicing and re-test.
10. CLEANING AND MAINTENANCE: The easy
seat should be stored in dry, not too hot rooms,
kept away from heaters & corrosive substances
and protected against direct sunlight. In case of
minor soiling, wipe the anchorage sling with
cotton cloth or a soft brush. Do not use any
abrasive material. For intensive cleaning wash
the anchorage sling in water at a temperature not
more than 40ºC by using a neutral detergent
(pH7). The washing temperature should not
exceed 40ºC. Do not use acidic or basic
detergents.
11. STORAGE AND TRANSPORT: When not in
use, store these products in a well-ventilated
area away from heavily acidic or basic
environment. Never place heavy items on top of
it. Also ensure that it is stored away from
chemically hazardous environment preferably
storage should be in dry environment.
12. HOW TO DISPOSE OF THE PRODUCT: When
the products become unfit or in case of any wear
and tear, dispose the product immediately.
Follow the steps below for Disposal:
ŸSegregate the equipment in three different
crates for placing components in them
respectively as- Textile, Metal and Plastic.
ŸSpread the anchorage sling on a table / flat
surface.
ŸInspect the wear & tear present on the
anchorage sling.
ŸIf any wear and tear is observed, dispose
the anchorage sling using a sharp scissor;
first cut the Textile and dismantle the
anchorage sling.
ŸPut the Textile, Plastic & Metal
components in their respective plastic
crates.
ŸOnce segregation done, arrange to send
them for recycling or disposal (as
appropriate) through authorized agencies
as per local or national law.
MARKING
MARKING ON PRODUCT: The webbing foot loop & cows tail are marked with
the following information:
i) Identification of the manufacturer with address
ii) Type or product code
iii) Month & Year of Manufacture
iv) UID for traceability
v) Material
vi) Pictogram that indicates to read the instructions
i
ii
iii
iv
v
vi

AKS/AFX201042/19072021/V1
LIFESPAN: The estimated product Lifespan is 10 years from the date of manufacture. The following factors can reduce the Lifespan of the product: intense
use, contact with chemical substances, specially aggressive environments, extreme temperature exposure, UV exposure, abrasions, cuts, violent impacts,
bad use or maintenance.
DISCLAIMER: Prior to use, the end user must read and understand the manufacturer's instructions supplied with this product at the time of shipment and seek
training from their employer's trained personnel on the proper usage of the product. Manufacturer is not liable or responsible for any loss, damage or injury
caused or incurred by any person on grounds of improper usage or installation of this product.
Periodic examination
next due date
Product
Model & type/Identification
Trade Name
Address
Identification number
Manufacturer
Tel, email into use
Year of manufacture
Purchase Date
Date first put into use
Other relevant information (eg. document number)
PERIODIC EXAMINATION AND REPAIR HISTORY
Date Name and signature
of competent person
Reason for entry
(periodic examination
or repair)
Defects noted, repairs
relevant information
carried out and other
EQUIPMENT RECORD
www.kstrong.com
USA South America ASIA
KStrong Inc.
150 N. Radnor Chester Road Suite F200
Radnor, Pennsylvania 19087 United States
Contact number : 1-833-KSTRONG
Contact Email: [email protected]