LEGRAND tynetec ZXT821 User manual

Tynetec, a business unit of Legrand Electric Ltd
Cowley Road, Blyth Riverside Business Park, Blyth, Northumberland, NE24 5TF.
Tel: [phone] www.tynetec.co.uk
Trusted Technology
Caring for People
869MHz
Big Button Alarm
_________________________________________________________________________
________________________________________________________________
Doc No. FM0829 V1.03 Page 1
•Manually activated trigger device
•Compatible with Reach IP, Advent XT2, Carer Response
and Touchsafe Pro V4.01 onward
•Free standing momentary action switch
•Non-slip, non-marking Polyurethane feet
•Easily operated across whole surface area
•Actuation force: 180 grams nominal
•Ultra-low profile: 10mm at lowest point
•Splash proof
•5 year Lithium battery (typical)
•Low battery warning
•Operating Temperature: +5oC to +40oC
•Telecare Transceiver: 869.2125MHz Class 1.5
•Digital Heartbeat
•Weight: 110 grams
•Dimensions: 125mm diameter x 26mm depth
•Product Code: ZXT821
Positioning
The big button is a wireless free-standing device which
can be placed on any flat surface within close reach of
the user. It’s easy-to-press large surface area means it is
especially suited for persons with mobility or dexterity
difficulties to activate an emergency alarm call.
The big button is not suitable for wall mounting or use in
damp/humid conditions.
Emergency Alarm Call
An emergency alarm call can be made by simply pressing
the big button once –no further action is required.
Low Battery Condition
A low battery condition will be reported automatically to
the Alarm Receiving Centre (ARC) or the local Manager.
The big button should be replaced as soon as possible
within 30 days. Big buttons can be returned to Tynetec for
battery replacement.
Out of Range Notification (Reach IP)
The Reach IP can monitor all radio peripheral devices to
determine whether they have been damaged or removed
from an installation. Should the Reach IP be unable to
detect a device’s heartbeat it will automatically generate a
“radio out of range” notification. Firstly, investigate if
there’s a genuine reason for the alert, if not, arrange for
the peripheral device to be replaced immediately.
The “Radio out of range timer” can be set from 30 hours to
99999 hours in Pulse CMP. “Radio supervision” can be
disabled by unchecking the tick box associated with each
peripheral device in Pulse CMP.
Maintenance
Test the big button once every month.
Clean with a damp cloth, do not use solvents or cleaners
on the big button.
Do not submerge in water.
Disposal
Waste electrical products should not be disposed
of with normal household waste. The big button
is ideally suited for disposal within the waste
electronic and electrical equipment (WEEE)
recycling scheme. Please recycle where facilities exist.
Check with your local authority or contact your supplier for
recycling/disposal advice.
Warning
The big button contains a Lithium battery. If tampered
with the battery may be damaged and create a fire hazard.
No attempt should be made to remove or replace the
battery. Do not incinerate.

Tynetec, a business unit of Legrand Electric Ltd
Cowley Road, Blyth Riverside Business Park, Blyth, Northumberland, NE24 5TF.
Tel: [phone] www.tynetec.co.uk
Trusted Technology
Caring for People
869MHz
Big Button Alarm
_________________________________________________________________________
________________________________________________________________
Doc No. FM0829 V1.03 Page 2
The Radio ID is a 10-digit
code printed on a small
label on the bottom of
the big button…
ZXT821
S:081923658
Iss-1
0193081E66
19W8
How to install the Big Button
The big button is designed for internal free-standing use
only, it is not suitable for wall mounting or external
applications. Do not use in damp or humid environments,
e.g. bath/shower rooms.
Remove and discard the 3 cardboard tags which prevent
an alarm being activated in transit.
Place the big button on a smooth flat surface with the
lowest operating point facing the user.
10mm
Lowest operating point
Telecare Radio ID
The big button includes a radio transceiver to
communicate with the Reach IP, XT2 or Carer Response.
Registering the Big Button onto a Reach IP
Login to Pulse CMP (www.tynetecpulse.com) and enter the
Reach IP Serial No. in the ALARM UNIT view. Press the
Accessories button and enter the Radio ID code, Location
and Equipment type. Press Save then Synchronize.
IMPORTANT: when the big button is delivered to the
customer a test call must be made to check operation and
start the digital heartbeat.
Alternatively, with the Reach IP in normal operating mode
undo the fixing screw and remove the stand or connector
cover to access the ⚫Power button.
Press the ⚫Power button to enter Control Mode, then
press and hold the button until the unit announces “add
radio device” then release.
Press the ⚫button to confirm then activate the alarm by
pressing the big button.
The Reach IP unit will sound a high beep if it’s a new device
and announce “range test mode”.
Press ⚫to confirm, or press to step to the next function,
or press to exit the mode.
Press the big button to check operation.
Registering the Big Button onto an Advent XT2
Press the Settings button on the Home page of the
Manager’s Panel. Press the Manager (or Engineer) button,
enter the password and press the Programming button.
Select the Program Radio Devices option from the tabs
along the bottom of the screen.
Press Flat ID and enter the flat number of the resident the
big button is being issued to. Enter 4-digits e.g. 0014.
Press Radio ID and enter the 10-digit code taken from the
label on the on the bottom of the big button.
Press Room Locations and select select “no location” as
the big button is a portable device.
Press the Send button to update the XT2 system.
Press the big button to check operation.
⚫Power Button

Tynetec, a business unit of Legrand Electric Ltd
Cowley Road, Blyth Riverside Business Park, Blyth, Northumberland, NE24 5TF.
Tel: [phone] www.tynetec.co.uk
Trusted Technology
Caring for People
869MHz
Big Button Alarm
_________________________________________________________________________
________________________________________________________________
Doc No. FM0829 V1.03 Page 3
Registering the Big Button onto a Carer Response
Refer to the Carer Response
user manual for full details
of the button functions and
how to navigate the menus.
menus.
From the Main menu select
Programming.
From the Programming menu select
Add transmitter.
The display will prompt you to
Activate the transmitter…
Press the big button.
The Carer Response will beep and the display will change to the
Add transmitter menu with a box showing No ID.
Press then to select Room, then press 
Press to select the room number box 0000.
Press to select the first digit, press to move between the
digits and press or to change each digit.
Press when the correct room number is displayed.
Press to select the alarm type box None.
Press thento select Trigger then press 
Press the button to select Save then press 
The display will show Radio ID saved to memory…
Return to the Main menu and select Quit.
Press the big button to check operation.
Registering the Big Button onto a Touchsafe Pro
Login to the Master Touchsafe Pro Nursecall Panel (must be
V4.01 onward) using an Engineer or Manager password.
From the Main Menu page select the Telecare option to open
the screen shown below.
Touch the Add Telecare Device box and enter the Telecare
device 10-digit Radio ID using the on-screen keypad.
Touch the Filter box and enter the zone you want to add the
Telecare device to using the on-screen keypad.
Touch the Room box and select the Callpoint ID from the list
that will be used to cancel the Telecare alarm.
Touch the Save button on the keypad.
Touch the Close button to exit.
Press the big button to check operation.
Declaration of Conformity
We declare this product complies with the
relevant UK legislation on condition that it is used in
the manner intended, and in accordance with the
current installation standards and/or the
manufacturer's recommendations. A copy of the full UKCA
Declaration of Conformity is available on request.
We declare this product complies with the
relevant European legislation on condition that it is
used in the manner intended, and in accordance with
the current installation standards and/or the
manufacturer's recommendations. A copy of the full CE
Declaration of Conformity is available on request.
Chris Dodd
CEO
Legrand Assisted Living & Healthcare