LEGRAND 3486 MyHome User manual

www.homesystems-legrandgroup.com
User manual
Burglar-alarm unit 3486

3
Burglar-alarm unit 3486
User manual

3
Burglar-alarm unit 3486
User manual
Introduction 4
The Burglar-alarm Unit 4
The keypad 5
The display 6
What is the display showing? 7
Operation 9
Enabling - disabling the burglar alarm 9
Activation scenarios 11
Activating - deactivating the zones 12
Stopping the siren sound 15
The radio remote control (348220) 17
What type of alarm occurred? 18
Enabling the automations 20
Enabling keys and numeric codes 21
Enabling the remote control 22
Editing 23
The Unit menu 23
Accessing the edit menu 23
Setting the date and hour 24
Sound signalling 25
Memorizing the Jolly number 26
Making your own list of telephone numbers 27
Visualizzazione gestione SMS 28
Setting up the calls 29
About your remaining credit 31
How many times should calls be made? 31
Editing vocal messages 33
Changing the user code 35
Changing the numeric codes 36
Using an answering machine 37
Remote use 39
The MyHOME_Web portal 39
MyHome Alarm 39
Answering a call from the Unit 40
Querying the Unit 40
Controlling your home from a distance 41
Contents

5
4
Burglar-alarm unit 3486
User manual
The Burglar Alarm guards the safety of your house; the system is split into zones that can be
activated separately; for example, at night, you can have protection only in the day zone or only
around your house, so you can move around freely even when the system is on.
You can save up to 16 activation scenarios and use them as needed.
In case of an alarm, the Telephone dialling device (communicator) warns you with a message,
allowing you to have direct control on what is happening in your house even when you’re not
there.
You can check the status of the Unit and system from a fixed or mobile phone, listen to what is
happening at home from a distance or send a vocal message, which will be emitted through the
Unit loudspeaker or, if connected, through the sound system.
The combination of roller shutter movement devices and lights turning on lets you program the
roller shutters to go up in case of an alarm in order to confuse the burglar.
You can control the functions in your house (lights, roller shutters, etc.) remotely with just a
telephone call.
The Unit can also communicate with surveillance firms by means of a special protocol, further
increasing the protection of your property (to set this service consult your installer).
MyHOME_Web portal Services
It gives the possibility of connecting to the MyHOME_ Web portal, providing access to the
MyHOME_Web services; for more information see chapter “The MyHOME_Web portal”
The Burglar-alarm Unit
Introduction
1 - Loudspeaker
2 - Graphic display
3 - IR infrared receiver
4 - Transponder keys reader
5 - Alphanumeric keypad
6 - Microphone
7 - Navigation keys
23/07/ 08
1
2
3
4
7
5
6

5
4
Burglar-alarm unit 3486
User manual
The keypad
Scroll keys
allow you to scroll the list of items in the menu
Selection keys
allow you to select the functions, which in some
menus, may appear in the last line
OK - Key for entering the selection or data
CLEAR - Key for cancelling the selection and for
returning to the previous page – if it is held down,
you can escape from the programming menu
Navigation keys
Alphanumeric keypad
. , - / : ‘ ? 1 g h i 4 í î p q r s 7
a b c 2 à á ä â ã ç j k l 5 t u v 8 ú ü
d e f 3 è é ê m n o 6 ó ö õ w x y z 9
spazio + = * # 0
•Press a numeric key several times until the required character is displayed; if the required letter
is near the same key as the present letter, wait until the cursor moves.
•To enter a space, press .
•To move the cursor, use the keys.
•To delete a letter, position the cursor over it with the keys and press .
•To change from lower case to upper case, hold down the button when the required character
is displayed. The next characters will be upper case; the procedure is the same to go back to
lower case.
•The following characters correspond to the single keys:
Writing the text

7
6
Burglar-alarm unit 3486
User manual
The display
Initial page
In case of an alarm
Edit menu
1. System zones (max. 8 zones)
2. GSM signal level
3. ON/OFF indication
4. Date and hour
1. Alarm signal zone
2. Technical indications
1. Active zones
2. Disabled zone
3. Functions
1 2 3 4 -- -- -- --
15/07/08 14:22
1
3
2
4
1 2 3 4 -- -- -- --
1
2
ZONES
1:Entrance
2:Perimeter
3:Night
Exclude
1
2
3
WHAT MUST NOT BE DONE:
– Never unscrew the antenna connector!;
– Do not remove the SIM Card!
If you need help, call your installation technician!

7
6
Burglar-alarm unit 3486
User manual
What is the display showing?
1 2 3 4 -- -- -- --
15/07/08 14:22
System off , e.g.: zones 1, 2, 3, 4 active
1 2 3 4 -- -- -- --
System off, Unit battery dead or damaged
1 2 3 4 -- -- -- --
System off, general alarm signal, tamptest with
system switched OFF or a dead radio device battery
1 2 3 4 -- -- -- --
System off , burglar-alarm (antitheft) battery dead or
damaged and technical alarm signal
scenario 2
15/07/08 14:22
System on, e.g.: zone activation as in scenario 2
1 2 3 4 -- -- -- --
System off , no power
1 2 3 4 -- -- -- --
System on, intrusion alarm signal and PSTN
telephone call (on fixed telephone) in progress
1 2 3 4 -- -- -- --
15/07/08 14:22
System off, one or more sensors disabled (Important
Unit functions are disabled; disable only if extremely
necessary.)

9
8
Burglar-alarm unit 3486
User manual
1 2 3 4 -- -- -- --
15/07/08 14:22
System off , all telephone calls disabled (Important
Unit functions are disabled; disable only if extremely
necessary.)
1 2 3 4 -- -- -- --
15/07/08 14:22
System on, SIM card missing or disabled (see
Installation manual)
1 2 3 4 -- -- -- --
15/07/08 14:22
System off , only the PSTN telephone calls disabled
(Important Unit functions are disabled; disable only
if extremely necessary.)
1 2 3 4 -- -- -- --
15/07/08 14:22
System off , GSM module OFF due to problems on
the GSM network (no signal)
1 2 3 4 -- -- -- --
15/07/08 14:22
System off , only the GSM telephone calls disabled
(Important Unit functions are disabled; disable only
if extremely necessary.)
1 2 3 4 -- -- -- --
System on, intrusion alarm signal and GSM call in
progress
scenario 4
15/07/08 14:22
Scenario 4 selected, good reception GSM signal
WHAT MUST NOT BE DONE:
– Never unscrew the antenna connector!;
– Do not remove the SIM Card!
If you need help, call your installation technician!

9
8
Burglar-alarm unit 3486
User manual
Operation
Enabling - disabling the burglar alarm
With user code
1 2 3 4 -- -- -- --
25/05/08 12:23
1 2 3 4 -- -- -- --
25/05/08 12:23
When the burglar alarm (antitheft) is disabled, an
open lock appears in the middle of the display
ANTIFURTO
Memoria eventi
Data e ora
Comandi
Automazioni
ANTIFURTO
Scenari
Zone
Dispositivi
Memoria eventi
SELEZIONARE
Antifurto
Comunicatore
AUTOMAZIONI
1:Automazione 1
2: Automazione 2
3: Automazione 3
Disabilita
AUTOMAZIONI
1:Automazione 1
2: Automazione 2
3: Automazione 3
Abilita
AUTOMAZIONI
1:Automazione 1
2: Automazione 2
3: Automazione 3
Disabilita
1 2 3 4 -- -- -- --
25/05/08 12:23
1 2 3 4 -- -- -- --
25/05/08 12:23
Press the key
ANTIFURTO
Memoria eventi
Data e ora
Comandi
Automazioni
ANTIFURTO
Scenari
Zone
Dispositivi
Memoria eventi
SELEZIONARE
Antifurto
Comunicatore
AUTOMAZIONI
1:Automazione 1
2: Automazione 2
3: Automazione 3
Disabilita
AUTOMAZIONI
1:Automazione 1
2: Automazione 2
3: Automazione 3
Abilita
AUTOMAZIONI
1:Automazione 1
2: Automazione 2
3: Automazione 3
Disabilita
1 2 3 4 -- -- -- --
25/05/08 12:23
1 2 3 4 -- -- -- --
25/05/08 12:23
Type in the user code (basic 00000) or an enabled
numeric code; typing an incorrect code, after the
third attempt the keypad blocks for about 1 minute
1 2 3 4 -- -- -- --
25/05/08 12:23
1 2 3 4 -- -- -- --
25/05/08 12:23
The display will show a closed lock; if the sound
system is enabled, you will hear an “enabled” vocal
message; execute the same operation to disable the
burglar alarm
With remote control
1 2 3 4 -- -- -- --
25/05/08 12:23
1 2 3 4 -- -- -- --
25/05/08 12:23
1 2 3 4 -- -- -- --
25/05/08 12:23
When the burglar alarm (antitheft) is disabled, an
open lock appears in the middle of the display
ANTIFURTO
Memoria eventi
Data e ora
Comandi
Automazioni
ANTIFURTO
Scenari
Zone
Dispositivi
Memoria eventi
SELEZIONARE
Antifurto
Comunicatore
AUTOMAZIONI
1:Automazione 1
2: Automazione 2
3: Automazione 3
Disabilita
AUTOMAZIONI
1:Automazione 1
2: Automazione 2
3: Automazione 3
Abilita
AUTOMAZIONI
1:Automazione 1
2: Automazione 2
3: Automazione 3
Disabilita
1 2 3 4 -- -- -- --
25/05/08 12:23
1 2 3 4 -- -- -- --
25/05/08 12:23
1 2 3 4 -- -- -- --
25/05/08 12:23
To enable the burglar alarm (antitheft), press the
remote control button after directing it towards the
Unit infrared receiver at a distance of 30 cm (max)
ANTIFURTO
Memoria eventi
Data e ora
Comandi
Automazioni
ANTIFURTO
Scenari
Zone
Dispositivi
Memoria eventi
SELEZIONARE
Antifurto
Comunicatore
AUTOMAZIONI
1:Automazione 1
2: Automazione 2
3: Automazione 3
Disabilita
AUTOMAZIONI
1:Automazione 1
2: Automazione 2
3: Automazione 3
Abilita
AUTOMAZIONI
1:Automazione 1
2: Automazione 2
3: Automazione 3
Disabilita
1 2 3 4 -- -- -- --
25/05/08 12:23
1 2 3 4 -- -- -- --
25/05/08 12:23
1 2 3 4 -- -- -- --
25/05/08 12:23
The display will show a closed lock; if the sound
system is enabled, you will hear an “enabled” vocal
message; execute the same operation to disable the
burglar alarm

11
10
Burglar-alarm unit 3486
User manual
With transponder key
1 2 3 4 -- -- -- --
25/05/08 12:23
1 2 3 4 -- -- -- --
25/05/08 12:23
1 2 3 4 -- -- -- --
25/05/08 12:23
When the burglar alarm (antitheft) is disabled, an
open lock appears in the middle of the display
ANTIFURTO
Memoria eventi
Data e ora
Comandi
Automazioni
ANTIFURTO
Scenari
Zone
Dispositivi
Memoria eventi
SELEZIONARE
Antifurto
Comunicatore
AUTOMAZIONI
1:Automazione 1
2: Automazione 2
3: Automazione 3
Disabilita
AUTOMAZIONI
1:Automazione 1
2: Automazione 2
3: Automazione 3
Abilita
AUTOMAZIONI
1:Automazione 1
2: Automazione 2
3: Automazione 3
Disabilita
1 2 3 4 -- -- -- --
25/05/08 12:23
1 2 3 4 -- -- -- --
25/05/08 12:23
1 2 3 4 -- -- -- --
25/05/08 12:23
To enable the burglar alarm (antitheft), press the
or key on the Unit keypad and then bring the
key (less than one centimeter) near the reader for 2
seconds
ANTIFURTO
Memoria eventi
Data e ora
Comandi
Automazioni
ANTIFURTO
Scenari
Zone
Dispositivi
Memoria eventi
SELEZIONARE
Antifurto
Comunicatore
AUTOMAZIONI
1:Automazione 1
2: Automazione 2
3: Automazione 3
Disabilita
AUTOMAZIONI
1:Automazione 1
2: Automazione 2
3: Automazione 3
Abilita
AUTOMAZIONI
1:Automazione 1
2: Automazione 2
3: Automazione 3
Disabilita
1 2 3 4 -- -- -- --
25/05/08 12:23
1 2 3 4 -- -- -- --
25/05/08 12:23
1 2 3 4 -- -- -- --
25/05/08 12:23
The display will show a closed lock; if the sound
system is enabled, you will hear an “enabled” vocal
message; execute the same operation to disable the
burglar alarm
Rapid enabling
1 2 3 4 -- -- -- --
25/05/08 12:23
1 2 3 4 -- -- -- --
25/05/08 12:23
3 seconds
When the burglar alarm (antitheft) is disabled, an
open lock appears in the middle of the display
ANTIFURTO
Memoria eventi
Data e ora
Comandi
Automazioni
ANTIFURTO
Scenari
Zone
Dispositivi
Memoria eventi
SELEZIONARE
Antifurto
Comunicatore
AUTOMAZIONI
1:Automazione 1
2: Automazione 2
3: Automazione 3
Disabilita
AUTOMAZIONI
1:Automazione 1
2: Automazione 2
3: Automazione 3
Abilita
AUTOMAZIONI
1:Automazione 1
2: Automazione 2
3: Automazione 3
Disabilita
1 2 3 4 -- -- -- --
25/05/08 12:23
1 2 3 4 -- -- -- --
25/05/08 12:23
3 seconds
Keep the key pressed for 3 seconds for the rapid
enabling
ANTIFURTO
Memoria eventi
Data e ora
Comandi
Automazioni
ANTIFURTO
Scenari
Zone
Dispositivi
Memoria eventi
SELEZIONARE
Antifurto
Comunicatore
AUTOMAZIONI
1:Automazione 1
2: Automazione 2
3: Automazione 3
Disabilita
AUTOMAZIONI
1:Automazione 1
2: Automazione 2
3: Automazione 3
Abilita
AUTOMAZIONI
1:Automazione 1
2: Automazione 2
3: Automazione 3
Disabilita
1 2 3 4 -- -- -- --
25/05/08 12:23
1 2 3 4 -- -- -- --
25/05/08 12:23
3 seconds
The display will show a closed lock; if the sound
system is enabled, you will hear an “enabled” vocal
message; execute the same operation to disable the
burglar alarm