Life Gear 27890 User manual

SPIN BIKE
ITEM NO.: 27890
OWNER’S MANUAL
IMPORTANT: Read all instructions carefully before using this product. Retain this
owner’s manual for future reference.
The specifications of this product may vary from this photo and are subject to change without
priornotice.
2016, May

1
TABLE OF CONTENTS
WARRANTY ------------------------------------------------------------------------------- 2
IMPORTANT SAFETY INSTRUCTIONS ------------------------------------------- 3
PARTS LIST ------------------------------------------------------------------------------- 4
HARDWARE AND TOOLS PACK ---------------------------------------------------- 6
EXPLODED VIEW ----------------------------------------------------------------------- 7
ASSEMBLY INSTRUCTIONS --------------------------------------------------------- 8
HOW TO MOVE THE BIKE ------------------------------------------------------------ 14
ADJUSTMENTS -------------------------------------------------------------------------- 15
EMERGENCY STOP -------------------------------------------------------------------- 18
MAINTENANCE -------------------------------------------------------------------------- 18
WARM UP AND COOL DOWN ROUTINE ----------------------------------------- 19

2
ONE YEAR LIMITED WARRANTY
LifeGear Inc. warrants to the original purchaser that this product is free from defects in
material and workmanship when used for the purpose intended, under the conditions that it
has been installed and operated in accordance with LifeGear's Owner's Manual. LifeGear's
obligation under this warranty is limited to replacing or repairing free of charge, any parts
which may prove to be defective under normal home use. This warranty does not include
any damage caused by improper operation, misuse or commercial application.
From the date of purchase, the frame is warranted to be free from defects for 1 (one) year.
This warranty is offered only to the original owner and is not transferable. Proof of
purchase is required.
When ordering replacement parts please have the following information ready:
1. Owner's Manual
2. Model Number
3. Description of Parts
4. Part Number
5. Date of Purchase

3
IMPORTANT SAFETY INSTRUCTIONS
Basic precautions should always be followed, including the following safety
instructions when using this bike. Read all instructions before using this bike.
1. Read all the instructions in this manual and do warm up exercises before using this
equipment.
2. Before exercise, in order to avoid injuring your muscles, warm-up exercise for every
muscle group is highly recommended. Please refer to the Warm Up and Cool Down
Routine pages for pre and post workout.
3. Please make sure all components are not damaged and in working order before use.
This equipment should be placed on a flat surface while in use. Using a mat or other
material on the ground is recommended.
4. Wear comfortable and suitable clothing when using the bike. Do not use the bike
barefoot, in only socks or in sandals, always wear athletic shoes. Never wear loose
clothing that might catch any part of the equipment.
5. Do not attempt any adjustments other than those described in this manual. Should any
problems arise, discontinue use and consult your local dealer.
6. Keep Dry - do not operate in a wet or moist condition.
7. Always hold on to the handlebar while using the equipment.
8. To dismount, reduce pedaling speed gradually before you stop.
9. Do not use the equipment outdoors. It is not a commercial model.
10. This equipment is for household use only.
11. Only one person should be on the equipment while in use.
12. Keep children and pets away from the product while in use. This machine is designed
for adults only. The minimum free space required for safe operation is not less than
two meters. Be sure the area around the bike remains clear during use and has
adequate clearance.
13. If you feel any chest pains, nausea, dizziness, or short of breath, you should stop
exercising immediately and consult your physician before continuing.
14. The maximum weight capacity for this product is 110 kgs.
Note: It is the obligation of the owner to review and explain these important safety
instructions to all users of this bike.
WARNING: Before beginning any exercise program consult your
physician. This is especially important for the people who are over 35 years old or
who have pre-existing health problems. Read all instructions before using any
fitness equipment.
CAUTION: Read all instructions carefully before operating this product.
Retain this Owner’s Manual for future reference.

4
PARTS LIST
No. Description Qty No. Description Qty
001 Adjustable Leveler
Ø40x35/M8x25 4 026 Washer Ø5 4
002 Nylon Nut M6 4 027 Water Bottle Holder 1
003 Cup Head Square Neck Bolt
M8x52 4 028 Handlebar Post 310x200x53 1
004 Rear Stabilizer 545x90x70 1 029 Handlebar 480x380x80 1
005 Stabilizer End Cap 86x86x58 4 030 Crank Cover Ø28x6.5 2
006 Washer Ø8 8 031 Hexagon Flange Bolt M8x16 2
007 Cap Nut M8 4 032 Crank Cap Ø56x28 1
008L Left Foot Pedal JD-304 1 033 Left Crank 1
008R Right Foot Pedal JD-304 1 034 Hexagon Nut Ø28xM20x1 1
009 Front Stabilizer 545x165x80 1 035 Bearing 6004ZZ 2
010 Main Frame 940x195x835 1 036 Spacer Ø25xØ20.5x41 1
011 L-Shape Knob M10x25 4 037 Axle Ø20xØ110x156 1
012 Nut Q235/32x12 2 038 Inner Cover 515x296x2.5 1
013 Round Pad Ø25x14 1 039 Cross Recessed Pan Head Self
Tapping Screw ST4.2x9.5 9
014 Round Pad Ø22x23 1 040 Belt Pulley Ø200x24 1
015 Washer Ø45xØ10.5x5 2 041 Right Crank 1
016 Square End Cap 38x38 2 042 Hexagon Socket Countersunk
Head Bolt M8x18 4
017 Seat Post 375x285x50 1 043 Belt 1
018 Seat Sliding Tube 110x65x60 1 044 Outer Cover 738x320x52 1
019 Seat Cushion DD-2681 1 045 Cross Recessed Pan Head Self
Tapping Screw ST4.2x13 2
020 Hexagon Bolt M8x40 2 046 Rectangular Outer Cover Plate
91.6x21.4x2 1
021 Transport Wheel Ø69x26 2 047 Crank Sleeve Ø25x2.5x9 1
022 Nylon Nut M8 6 048 Hexagon Bolt M5x10 2
023 Bearing 608ZZ 4 049 Nylon Nut M5 2
024 Cross Recessed Pan Head Self
Tapping Screw ST4.2x19 16 050 Small Spring Plate 1
025 Water Bottle 1 051 Hexagon Bolt M5x30 2

5
PARTS LIST
No. Description Qty No. Description Qty
052 Brake Pad 113x25x8 1 068 Bearing 6001ZZ 2
053 Brake Bracket 200x47x30 1 069 Flywheel Ø453x29 (20 kgs) 1
054 Spring Ø2.2 1 070 Axle Ø12x160 1
055 Spring Cap 32x23x2 1 071 Hexagon Flange Nut M12x1.25 2
056 Cap Nut M6 1 072 Plastic Bushing 38x38x1.5 2
057 Washer Ø10 1 073 Left Decorative Cover 1
058 Brake Block 14x9x14 1 074 Right Decorative Cover 1
059 Spring δ1.8x40 1 075 Round Cap for Flywheel Ø59x35 1
060 Hexagon Nut M10 1 076 Hexagon Nut M12x1.25 1
061 Spring Ø1.0x55 1 077 Washer Ø12 3
062 Small Bushing
Ø21.1xØ18xØ10.2x27.5 1 078 Spring Washer Ø5 2
063 Tension Knob Ø10x175 1 079 Elbow Protective Pad Plate 2
064 Eyebolt M6x57 2 080 Hexagon Socket Countersunk
Head Bolt M6x18 4
065 Hexagon Nut M6 2 081 Velcro 100x55 2
066 Hexagon Nut M12x1.25 2 082 Elbow Protective Pad 120x65 2
067 Flywheel Bushing
Ø16xØ12.1x36 1 083 Wire Grommet Ø14x14 2

6
HARDWARE AND TOOLS PACK
(3) Cup Head Square Neck Bolt 4 PCS
(6) Washer 4 PCS
(7) Cap Nut 4 PCS
Wrench
1 PC
Multi Hex Tool with
Phillips Screwdriver
1 PC
(11) L-Shape Knob 4 PCS
(15) Washer 2 PCS

7
EXPLODED VIEW
5
6
7
6
7
4
1
8L
8R
11
11
12
14
15
24
25
26
28
29
35
38
24
42
43
45
46
47
51
52
54
55
56
57
58
59
60
61
62
63
64 65
66
66
67
68
68
69
70
71
71
75
76 77
77
77
24
24
24
24
39
39
6
2
24
39
74
24
73
72
48
78
50
49
26
79
80
81
82
20
23
21
23
44
41
31 30
39
37
22
30 31
33 32 34 35 36
40
72
1
5
13
12
11
16
19
18
17
15
11
16
24
53
27
22
24
39
1
5
5
3
9
3
10
24
81
82
83
24
83

8
10
4
7
6
3
3
6
7
Hardware:
(3) Cup Head Square Neck Bolt 2 PCS
(6) Washer 2 PCS
(7) Cap Nut 2 PCS
3
6
7
7
6
39
10
Hardware:
(3) Cup Head Square Neck Bolt 2 PCS
(6) Washer 2 PCS
(7) Cap Nut 2 PCS
ASSEMBLY INSTRUCTIONS
STEP 1
Position the Rear Stabilizer (4) behind the Main Frame (10) and align bolt holes.
Attach the Rear Stabilizer (4) onto the rear of the Main Frame (10) with two Cup Head
Square Neck Bolts (3), two Washers (6), and two Cap Nuts (7). Tighten cap nuts with
the Wrench provided.
STEP 2
Position the Front Stabilizer (9) which has one pair of the transport wheel in front of the
Main Frame (10) and align bolt holes.
Attach the Front Stabilizer (9) onto the front of the Main Frame (10) with two Cup Head
Square Neck Bolts (3), two Washers (6), and two Cap Nuts (7). Tighten cap nuts with
the Wrench provided.

9
STEP 3
Insert the Seat Post (17) into the Plastic Bushing (72) of the Main Frame (10) and align
L-shape knob holes. Then attach the L-Shape Knob (11) onto the tube of the Main Frame
(10) by turning it in a clockwise direction to tighten the Seat Post (17) in the desired position.
NOTE: Do not raise the seat post beyond the “STOP” mark printed line on the seat
post.
STEP 4
Slide the Seat Sliding Tube (18) onto the top end of the Seat Post (17), attach with one
L-Shape Knob (11) and one Washer (15).
11
72
17
10
11
17
Assembly Part:
(11) L-Shape Knob 1 PC
11
15
18
11
15
18
17
Hardware & Assembly Part:
(11) L-Shape Knob 1 PC
(15) Washer 1 PC

10
19 Nut
17
19
Nut
Nut 18
STEP 5
Loosen nuts from underside of the Seat Cushion (19) with the Multi Hex Tool with Phillips
Screwdriver provided. Then install the Seat Cushion (19) onto the Seat Sliding Tube (18)
and secure with nuts that were loosened. Tighten nuts with the Multi Hex Tools with Phillips
Screwdriver provided.
STEP 6
Attach the Handlebar (29) onto the Handlebar Post (28) with one L-Shape Knob (11) and
one Washer (15). Turn the L-Shape Knob (30) in a clockwise direction to lock the
Handlebar (29) in place.
11
15
28
29
Hardware & Assembly Part:
(11) L-Shape Knob 1 PC
(15) Washer 1 PC

11
STEP 7
Insert the Handlebar Post (28) into the Plastic Bushing (72) of the Main Frame (10) and align
L-shape knob holes. Then attach the L-Shape Knob (30) onto the tube of the Main Frame
(10) by turning it in a clockwise direction to tighten the Handlebar Post (28) in the desired
position.
NOTE: Do not raise the handlebar post beyond the “STOP” mark printed line on the
handlebar post.
11
28
72
10

12
STEP 8
The Cranks and Pedal Shafts are marked “R” for Right and “L” for Left.
Insert the pedal shaft of Left Foot Pedal (8L) into threaded hole in the Left Crank (33). Turn
the pedal shaft by hand in the counterclockwise direction until snug.
NOTE: DO NOT turn left foot pedal shaft in the clockwise direction, doing so will strip
the threads.
Tighten the pedal shaft of Left Foot Pedal (8L) with the Multi Hex Tool with Phillips
Screwdriver provided.
Insert pedal shaft of Right Foot Pedal (8R) into threaded hole in Right Crank (41). Turn the
pedal shaft by hand in the clockwise direction until snug.
NOTE: DO NOT turn right foot pedal shaft in the counterclockwise direction, doing so
will strip the threads.
Tighten pedal shaft of Right Foot Pedal (8R) with the Multi Hex Tool with Phillips Screwdriver
provided.
10
41
33
8R
8L

13
26 24
10
10
27
25
26 24
25
27
STEP 9
Remove two Washers (26) and two Cross Recessed Pan Head Self Tapping Screws (24)
from the Main Frame (10). Remove screws with the Multi Hex Tool with Phillips
Screwdriver provided.
STEP 10
Attach the Water Bottle Holder (27) onto the Main Frame (10) with two Washers (26) and two
Cross Recessed Pan Head Self Tapping Screws (24) that were removed. Tighten screws
with the Multi Hex Tool with Phillips Screwdriver provided.
Put the Water Bottle (25) in the Water Bottle Holder (27).

14
Handlebar
Transport Wheel
HOW TO MOVE THE BIKE
This bike has a pair of Transport Wheels built into the front stabilizer and can be carefully
tilted onto its Transport Wheels for easy moving and storage.
To move the bike, stand in front of the bike, firmly grasp the Handlebar with both hands.
Next, carefully push the bike down until it rolls freely on the Transport Wheels.
CAUTION: It is suggested you always use the aid of a second person when moving
the bike.

15
ADJUSTMENTS
Adjusting the Adjustable Leveler
Turn the Adjustable Leveler and hexagon nut on the front and rear stabilizers as needed to
level the bike.
Adjusting the Tension Knob
To increase the tension, turn the Tension Knob in a clockwise direction.
To decrease the tension, turn the Tension Knob in a counterclockwise direction.
Adjustable Leveler
Adjustable Leveler
Tension Knob

16
L-Shape Knob
Adjusting the Handlebar Height
Loosen the L-Shape Knob by turning it counterclockwise direction. Slide the handlebar
post up or down direction to the desired position. Lock the handlebar post in place by
turning the knob clockwise direction.
The L-Shape Knob is spring loaded. If the L-Shape Knob strikes the other L-Shape
Knob or handlebar post while you’re trying to loosen or tighten it, pull on the L-Shape
Knob and rotate it to a different position and release it.
Make sure that the L-Shape Knob is locked in place before using the bike.
NOTE: Do not raise the handlebar post beyond the “STOP” mark printed line on the
handlebar post.
Adjusting the Handlebar Fore or Aft Position
Loosen the L-Shape Knob by turning it counterclockwise direction. Slide the handlebar
forward or backward direction to the desired position. Lock the handlebar in place by
turning the knob clockwise direction.
The L-Shape Knob is spring loaded. If the L-Shape Knob strikes the handlebar post
while you’re trying to loosen or tighten it, pull on the L-Shape Knob and rotate it to a
different position and release it.
Make sure that the L-Shape Knob is locked in place before using the bike.
L-Shape Knob

17
Adjusting the Seat Height
Loosen the L-Shape Knob by turning it counterclockwise direction. Slide the seat post up
or down direction to the desired position. Lock the seat post in place by turning the knob
clockwise direction.
The L-Shape Knob is spring loaded. If the L-Shape Knob strikes the other L-Shape
Knob or seat post while you’re trying to loosen or tighten it, pull on the L-Shape Knob
and rotate it to a different position and release it.
Make sure that the L-Shape Knob is locked in place before using the bike.
NOTE: Do not raise the seat post beyond the “STOP” mark printed line on the seat
post.
Adjusting the Seat Fore or Aft Position
Loosen the L-Shape Knob by turning it counterclockwise direction. Slide the seat sliding
tube forward or backward direction to the desired position. Lock the seat sliding tube in
place by turning the knob clockwise direction.
The L-Shape Knob is spring loaded. If the L-Shape Knob strikes the seat post while
you’re trying to loosen or tighten it, pull on the L-Shape Knob and rotate it to a
different position and release it.
Make sure that the L-Shape Knob is locked in place before using the bike.
L-Shape Knob
L-Shape Knob

18
Tension Knob
EMERGENCY STOP
WARNING: In case of emergency, you may press directly down on the Tension
Knob. Continue holding the Tension Knob down until the flywheel comes to a complete
stop.
MAINTENANCE
CLEANING
After each exercise, ensure that the unit is wiped down and any sweat is removed
from the unit.
The bike can be cleaned with a soft clean cloth. Do not use abrasives or solvents on
plastic parts.
INSPECTION
Inspect the frames for rust or other damage. Make sure the welds on the bike are solid and
all bolts and nuts are properly tight and installed correctly.
STORAGE
Store the bike in a clean and dry indoor environment. Never leave or use the bike outdoors.

19
WARM UP AND COOL DOWN ROUTINE
The WARM-UP is an important part of any workout. The purpose of warming up is to
prepare your body for exercise and to minimize injuries. Warm up for two to five minutes
before aerobic exercising. It should begin every session to prepare your body for more
strenuous exercise by heating up and stretching your muscles, increasing your circulation
and pulse rate, and delivering more oxygen to your muscles.
COOL DOWN at the end of your workout, repeat these exercises to reduce soreness in tired
muscles. The purpose of cooling down is to return the body to its resting state at the end of
each exercise session. A proper cool-down slowly lowers your heart rate and allows blood
to return to the heart.
HEAD ROLLS
Rotate your head to the right for one count, you should feel a
stretching sensation up the left side of your neck. Then rotate your
head back for one count, stretching your chin to the ceiling and
letting your mouth open. Rotate your head to the left for one count,
then drop your head to your chest for one count.
SHOULDER LIFTS
Lift your right shoulder toward your ear for one count. Then lift your
left shoulder up for one count as you lower your right shoulder.
SIDE STRETCHES
Open your arms to the side and lift them until they are over your head.
Reach your right arm as far toward the ceiling as you can for one
count. Repeat this action with your left arm.