LSIS Master-K K200S User manual

z Read this manual carefully before installing,
wiring, operating, servicing or inspecting this
equipment.
z Keep this manual within easy reach for
quick reference.
Pro
g
rammable Lo
g
ic Controlle
r
K200S
K300S
K1000S
MASTER-K

Chapter 1 Introduction
1 Introduction.........................................................................................................1-1
1.1 Guide to the user’s manual.......................................................................................1-1
1.2 Features....................................................................................................................1-2
1.3 Terminology...............................................................................................................1-3

Chapter 1 Instruction MASTER-K
1-1
1 Introduction
1.1 Guide to the user’s manual
This user’s manual contains specifications, performance, and handling instructions for each of
unit of MASTER-K 200S/300S/1000S series PLC system.
The following table shows the configuration of this user’s manual.
Chapter Item Description
1 Instruction Describes configuration of this manual, modules
features and terminology.
2 System configuration
Describes available modules and system
configurations in the MASTER-K200S/300S/1000S
series.
3 Specifications Describes general specifications of various modules
used in the MASTER-K200S/300S/1000S series.
4 CPU module Describes the performance, specifications and
functions of the CPU module.
5 Battery
6 Memory module
7 Digital I/O module
8 Power supply module
9 Base and cable
Describes the specifications and handling instructions
for other modules except for the CPU module.
10 Installation and wiring Describes installation, wiring and handling instructions
for reliability of the PLC system.
11 Maintenance Describes the check point and method for
maintenance of the PLC system.
12 Troubleshooting Describes various operation errors and corrective
actions.
13 RS232C communication
for K200S Describes the RS-232C communication function of K200S A and C type
14 RS422 communication
for K200S Describes the RS422 communication functions of K200S B type
15 PID function of K200S Describes the PID control function of K200S B and C
type
16 High speed counter of
K200S Describes the HSC function of K200S C type
Appendix 1 Flag list Describes types and contents of various flags
Appendix 2 Dimension Shows dimensions of CPU, I/O modules and base
unit
Remark
In this manual, it is not described that the hardware information and programming of
special/communication modules. Please refer the user’s manual of each module for details.

Chapter 1 Instruction MASTER-K
1-2
1.2 Features
The features of MASTER-K 200S/300S/1000S series are as following;
1) Program compatibility with previous MASTER-K series
2) Support various and easy-to-use programming devices
① KGL-WIN : Graphic loader for Windows 95 / 98
② KLD-150S : Hand-held loader
3) Open network by supporting communication protocol complying with international
standard.
4) Fast processing speed (operation dedicated processor is mounted)
① K200S : 0.5 μsec / step
② K300S / K1000S : 0.2 μsec / step
5) Various special modules that enlarge the application range of PLC
6) Enhanced self-diagnosis functions
The MASTER-K 200S/300S/1000S series provides more detail error codes that make the
cause of error can be found more easily.
7) Debug function
On-line debugging is available by changing the operation mode as RUN ÆDebug. The
MASTER-K 200S/300S/1000S series provides following debugging functions;
① Execution by one instruction
② Execution by break point setting
③ Execution by the device status
④ Execution by specified scan times
8) Various program types
The MASTER-K 200S/300S/1000S series supports various program types such as time-
driven interrupt (TDI), process-driven interrupt (PDI), and subroutine program.

Chapter 1 Instruction MASTER-K
1-3
1.3 Terminology
The following table shows the definition of terms used in this manual.
Terms Definition Remark
Module A standard element that has a specified function which
configures a system. Devices such as CPU or I/O, which
mounted on the base board or base unit.
Example)
CPU module,
Power module,
I/O module, etc.
Unit A single module or group of modules that performs an
independent operation as a part of PLC system.
Example)
main unit,
expansion unit
PLC system A system that consists of PLC and peripheral devices that
are controlled by user program.
KGL-WIN A computer software for Windows 95 / 98 used for write,
editing, and debugging of user program of MASTER-K
series.
KLD-150S A hand-held loader used for write, editing, and debugging
of user program of MASTER- K series
I/O image area Internal memory area of CPU module that holds the I/O
status during PLC operation.
FAM Abbreviation of the ‘Factory Automation Monitoring S/W’. It
is used to call software for process supervision.
Fnet Fieldbus network
Cnet Computer network (RS-232C, RS-422/485)
Pnet ProfiBus Network
Enet Ethernet Network
RTC Abbreviation of ‘Real Time Clock’. It is used to call general
ICs that contains clock function.
Watchdog timer An internal timer used for supervising program execution
time. It gives a warning when the execution time exceeds
the preset time.

Chapter 1 Instruction MASTER-K
1-4
Terms Definition Remark
Sink input
Current flows in from the input switch to the input terminal of
PLC when an input signal is turned on.
Z: Input
impedance
Source input
Current flows out from the input terminal of PLC to the input
switch when an input signal is turned on.
Sink output
Current flows in from the external load to the output terminal of
PLC when an output signal is turned on.
Source output
Current flows out from the output terminal of PLC to the
external load when an output signal is turned on.
Z
Common
+
Power
–
Switch
Current
PLC
Input
terminal
Z
Common
–
Power
+
Switch
Current
PLC
Input
terminal
Common
+
Power
–
Output
rela
y
Current
PLC Output
terminal Z
Common
–
Power
+
Output
rela
y
Current
PLC Output
terminal Z

Chapter 2 System configuration
2 System configuration ...........................................................................................2-1
2.1 Overall configuration................................................................................................2-1
2.1.1 K200S series..........................................................................................................2-1
2.1.2 K300S / 1000S series............................................................................................2-2
2.2 Product list ................................................................................................................2-3
2.2.1 K200S....................................................................................................................2-3
2.2.2 K300S....................................................................................................................2-5
2.2.3 K1000S..................................................................................................................2-8
2.3 System configuration types................................................................................... 2-11
2.3.1 Basic system configuration.................................................................................. 2-11
2.3.2 Computer link system ..........................................................................................2-12
2.3.3 Network system ...................................................................................................2-13

Chapter 2 System configuration MASTER-K
2-1
2 System configuration
The MASTER-K 200S/300S/1000S series has various modules suitable to configuration from
the basic to a large network system. This chapter describes the configuration and features of
each systems.
2.1 Overall configuration
2.1.1 K200S series
The overall system configuration of K200S series is as following;
K3S-301S
POWER O
K3P-07AS
RUN
PAU/RE
M
CPU Module
Battery
RS-232C
Cable IBM
compatible PC
Power Supply
Module
(K3S-□□□S)
Base board(GM6 – B □□M)
KGL-WIN S/W
G6I-D22A
Input Module
(G6I-□□□S)
G6Q-RY2A
Output Module
(G6Q-□□□S)
G6F-AD2A
Special Module
(G6F-□□□□)
G6L-FUEA
Communication
Module
(G6L-□□□□)
KGL-WIN

Chapter 2 System configuration MASTER-K
2-2
2.1.2 K300S / 1000S series
The overall system configuration of K300S/1000S series is as following;
KGL-WIN
K7P
-
30AS
MASTER-K
IBM compatible PCRS232-C Cable
Memory Module
Battery
CPU Module
Main Base
Expansion Cable
Fuse
Power Supply
Module
Input Module
Output Module
Special Function Module
Communication Module
Expansion Base

Chapter 2 System configuration MASTER-K
2-3
2.2 Product list
The product list of K200S/300S/1000S are as following;
2.2.1 K200S
Items Model No. Description Remark
K3P-07AS Max. I/O points : 512 points
Special functions : RS-232C
K3P-07BS Max. I/O points : 512 points
Special functions : RS-422/485, RTC, PID control
CPU
modules
K3P-07CS Max. I/O points : 512 points
Special functions : RS-232C, RTC, HSC, PID control
G6I-D21A 12/24VDC input, 8 points (source/sink)
G6I-D22A 12/24VDC input, 16 points (source/sink)
G6I-D22B 24VDC input, 16 points (source)
G6I-D24A 12/24VDC input, 32 points (source/sink)
G6I-D24B 24VDC input, 32 points (source)
G6I-A11A 110VAC input, 8 points
Digital
input
modules
G6I-A21A 220VAC input, 8 points
G6Q-RY1A Relay output, 8 points, 2A/point 1points/com
G6Q-RY2A Relay output, 16 points, 2A/point
G6Q-TR2A Transistor output, 16 points, 0.5A/point (sink)
G6Q-TR2B Transistor output, 16 points, 0.5A/point (source)
G6Q-TR4A Transistor output, 32 points, 0.1A/point (sink)
G6Q-TR4B Transistor output, 32 points, 0.1A/point (source)
Digital
output
modules
G6Q-SS1A Triac output, 16 points, 1A/point
Digital I/O
hybrid
module G6H-DR2A 12/24VDC input, 8 points (source/sink)
Relay output, 8 points, 2A/point
GM6-B04M 4 module
GM6-B06M 6 module
GM6-B08M 8 module
Main
bases
GM6-B12M 12 module
GM6-PAFA 5VDC (2A), 24VDC (0.3A)
GM6-PAFB 5VDC (2A), +15VDC (0.5A), -15VDC (0.2A)
GM6-PAFC
100 ~
240VAC 5VDC (3.5A), 24VDC (0.3A)
GM6-PDFA 5VDC (2A)
Power
supply
modules
GM6-PDFB 12 ~
24VDC 5VDC (3A), +15VDC (0.5A), -15VDC (0.2A)

Chapter 2 System configuration MASTER-K
2-4
(continued)
Items Model No. Description Remark
A/D conversion
modules G6F-AD2A Voltage / Current input, 4channels
1 ~ 5VDC / 0 ~ 10VDC / -10 ~ 10VDC
DC 4 ~ 20mA
G6F-DA2V Voltage output, 4 channels
-10 ~ 10VDC
D/A conversion
modules G6F-DA2I Current output, 4 channels
DC 4 ~ 20mA
High speed
counter module G6F-HSCA Counting range ( 0 ~ 16,777,215 : binary 24 bits)
50kHz, 1 channel
Positioning
module G6F-POPA Pulse output, 2 axes control
Special modules
Thermocouple
module G6F-TC2A Sensor type : 7 types (K, J, E, T, B, R, S)
Input channel : 4 channels
G6L-FUEA Fnet I/F module
1Mbps base band, Twisted pair cable
Fnet modules
G6L-RBEA Fnet remote I/F module
1Mbps base band, Twisted pair cable
G6L-CU2A Cnet I/F module (RS-232C)
Cnet modules G6L-CU4A Cnet I/F module (RS-422/485)
DeviceNet
module G6L-DUEA DeviceNet I/F module
G6L-PUEA ProfiBus I/F module
Network modules
ProfiBus module G6L-PUEB ProfiBus I/F module
Dust-cover GM6-DMMA Dust-protector for unused slot

Chapter 2 System configuration MASTER-K
2-5
2.2.2 K300S
Items Model No. Description Remark
CPU
modules K4P-15AS Max. I/O points : 512 points
G4I-D22A 12/24VDC input, 16 points (source/sink)
G4I-D22B 12/24VDC input, 16 points (source)
G4I-D22C 24VDC input, 16 points (source/sink)
G4I-D24A 12/24VDC input, 32 points (source/sink)
G4I-D24B 12/24VDC input, 32 points (source)
G4I-D24C 24VDC input, 32 points (source/sink)
G4I-D28A 12/24VDC input, 64 points (source/sink)
G4I-A12A 110VAC input, 16 points
Digital
input
modules
G4I-A22A 220VAC input, 16 points
G4Q-RY2A Relay output, 16 points, 2A/point
G4Q-TR2A Transistor output, 16 points, 0.5A/point (sink)
G4Q-TR2B Transistor output, 16 points, 0.5A/point (source)
G4Q-TR4A Transistor output, 32 points, 0.1A/point (sink)
G4Q-TR4B Transistor output, 32 points, 0.1A/point (source)
G4Q-TR8A Transistor output, 64 points, 0.1A/point (sink)
G4Q-SS2A Triac output, 16 points, 1A/point
Digital
output
modules
G4Q-SS2B Triac output, 16 points, 0.6A/point
GM4-B04M 4 module
GM4-B06M 6 module
GM4-B08M 8 module
Main base
boards
GM4-B12M 12 modules No expansion
GM4-B04E 4 modules
GM4-B06E 6 modules
Expansion
base
boards GM4-B08E 8 modules
G4C-E041 Length : 0.4m
G4C-E121 Length : 1.2m
Expansion
cables G4C-E301 Length : 3.0m
Memory
module GM4-M032 Flash memory, 32k steps
GM4-PA1A 110VAC
GM4-PA2A 220VAC 5VDC : 5A, 24VDC : 0.7A
GM4-PA1B 110VAC
GM4-PA2B 220VAC 5VDC : 3A, 24VDC : 0.5A,
Power
supply
modules
GM4-PD3A 24VDC 5VDC : 4A, 24VDC : bypass

Chapter 2 System configuration MASTER-K
2-6
(continued)
Items Model No. Description Remark
G4F-AD2A Voltage / Current input, 4channels
-5 ~ 5VDC / -10 ~ 10VDC
DC -20 ~ 20mA
A/D
conversion
modules G4F-AD3A Voltage / Current input, 8channels
1 ~ 5VDC / 0 ~ 10VDC
DC 4 ~ 20mA
G4F-DA1A Voltage / Current output, 2 channels
-10 ~ 10VDC, DC4 ~ 20mA
G4F-DA2V Voltage output, 4 channels
-10 ~ 10VDC
G4F-DA2I Current output, 4 channels
DC 4 ~ 20mA
G4F-DA3V Voltage output, 8 channels
-10 ~ 10VDC
D/A
conversion
modules
G4F-DA3I Current output, 8 channels
DC 4 ~ 20mA
High
speed
counter
module
G4F-HSCA Counting range ( 0 ~ 16,777,215 : binary 24 bits)
50kHz, 1 channel
G4F-POPA Pulse output, 1 axis control
Positioning
module G4F-POPB Pulse output, 2 axes control
Thermoco
uple input
module G4F-TC2A Sensor type : 7 types (K, J, E, T, B, R, S)
4 channels
RTD
module G4F-RD2A Sensor type : Pt100, JPt100
4 channels
PID control
module G4F-PIDA Max. 8 loops control
Analog
timer
module G4F-AT3A 8 analog timers
Setting range : 0.1 ~ 1.0sec / 1 ~ 10sec
10 ~ 60sec / 60 ~ 600sec
Each channel
can be set
independently
Special modules
Interrupt
module G4F-INTA 8 channels

Chapter 2 System configuration MASTER-K
2-7
(continued)
Items Model No. Description Remark
G4L-FUEA Fnet I/F module
1Mbps base band, Twisted pair cable
G0L-FUEA Fnet I/F module
1Mbps base band, Twisted pair cable Install to the IBM
compatible PC
G4L-RBEA Fnet remote I/F module
1Mbps base band, Twisted pair cable
G0L-SMIA Fnet single I/F module
12 / 24VDC input, 16 points
G0L-SMQA Fnet single I/F module
Relay output, 1A/point, 16 points
G0L-SMHA Fnet single I/F module 12 / 24VDC input, 8 points
Relay output, 1A/point, 16 points
Fnet
modules
G0L-FREA Repeater for Fnet
Converter G0L-FOEA Optical ↔Electrical converter
G0L-FAPA Power module for active coupler
G0L-FABA Base board for active coupler
G0L-FACA Active coupler
Active
coupler
G0L-FADA Dummy card for active coupler
Cnet
modules G4L-CUEA Cnet I/F module (RS-232C)
DeviceNet I/F
module G4L-DUEA DeviceNet I/F module
G4L-PUEA Profibus-DP master module (I/O: 1K)
Network modules
Profibus-DP
I/F module G4L-PUEB Profibus-DP master module (I/O: 7K)
In 3.0 or higher
CPU O/S version
and 3.2 or higher
KGL-WIN version
Pseudo
input
switch G4S-SW16 Pseudo input switch, 16 points
Others
Dust cover GM4-DMMA Dust protector for unused slot

Chapter 2 System configuration MASTER-K
2-8
2.2.3 K1000S
Items Model No. Description Remark
CPU
modules K7P-30AS Max. I/O points : 1,024 points
G3I-D22A 12/24VDC input, 16 points (source/sink)
G3I-D24A 12/24VDC input, 32 points (source/sink)
G3I-D24C 24VDC input, 32 points (source/sink)
G3I-D28A 12/24VDC input, 64 points (source/sink)
G3I-A12A 110VAC input, 16 points
G3I-A22A 220VAC input, 16 points
G3I-A14A 110VAC input, 32 points
Digital
input
modules
G3I-A24A 220VAC input, 32 points
G3Q-RY2A Relay output, 16 points, 2A/point
G3Q-RY4A Relay output, 32 points, 1A/point
G3Q-TR2A Transistor output, 16 points, 2A/point (sink)
G3Q-TR4A Transistor output, 32 points, 0.5A/point (sink)
G3Q-TR4B Transistor output, 32 points, 0.5A/point (source)
G3Q-TR8A Transistor output, 64 points, 0.1A/point (sink)
G3Q-TR8B Transistor output, 64 points, 0.1A/point (source)
G3Q-SS2A Triac output, 16 points, 2A/point
Digital
output
modules
G3Q-SS4A Triac output, 32 points, 1A/point
GM3-B04M 4 module
GM3-B06M 6 module
Main base
boards GM3-B08M 8 module
GM3-B04E 4 modules
GM3-B06E 6 modules
Expansion
base
boards GM3-B08E 8 modules
G3C-E061 Length : 0.6m
G3C-E121 Length : 1.2m
Expansion
cables G3C-E301 Length : 3.0m
Memory
module G3M-M064 Flash memory, 64k steps
GM3-PA1A 110VAC
GM3-PA2A 220VAC 5VDC : 7A, 24VDC : 1.5A
GM1-PA1A 110VAC
GM1-PA2A 220VAC 5VDC : 13A, 24VDC : None
Power
supply
modules
GM3-PD3A 24VDC 5VDC : 4A, 24VDC : bypass

Chapter 2 System configuration MASTER-K
2-9
(continued)
Items Model No. Description Remark
G3F-AD4A Voltage / Current input, 16 channels
-5 ~ 5VDC / -10 ~ 10VDC
DC -20 ~ 20mA
G3F-AD4B Voltage / Current input, 16 channels
1 ~ 5VDC / 0 ~ 10VDC
DC 4 ~ 20mA
A/D
conversion
modules
G3F-AD3A Voltage / Current input, 8 channels 1 ~ 5VDC / 0 ~ 10VDC
DC 4 ~ 20mA
G3F-DV4A Voltage output, 16 channels
-5 ~ 5VDC / -10 ~ 10VDC
G3F-DI4A Current output, 16 channels
DC 4 ~ 20mA
G3F-DV3A Voltage output, 8 channels
0 ~ 10VDC
D/A
conversion
modules
G3F-DI3A Current output, 8 channels
DC 4 ~ 20mA
G3F-PA1A 110VAC
Power
supply
module G3F-PA2A 220VAC
+15VDC : 0.5A
-15VDC : 0.1A For A/D & D/A
modules
High speed
counter
module G3F-HSCA Counting range ( 0 ~ 16,777,215 : binary 24 bits)
50kHz, 2 channels
G3F-POPA Pulse output, 1 axis control
Positioning
module G3F-POAA Analog output, 2 axes control
Thermocou
ple input
module G3F-TC4A Sensor type : 7 types (K, J, E, T, B, R, S)
16 channels
RTD
module G3F-RD3A Sensor type : Pt100, JPt100
8 channels
PID control
module G3F-PIDA Max. 32 loops control
Analog
timer
module G3F-AT4A 16 analog timers
Setting range : 0.1 ~ 1.0sec / 1 ~ 10sec
10 ~ 60sec / 60 ~ 600sec
Each channel
can be set
independently
Interrupt
module G3F-INTA 16 channels

Chapter 2 System configuration MASTER-K
2-10
(continued)
Items Model No. Description Remark
G3L-FUEA Fnet I/F module
1Mbps base band, Twisted pair cable
G3L-FUOA Fnet I/F module
1Mbps base band, Optical fiber cable
G0L-FUEA Fnet I/F module
1Mbps base band, Twisted pair cable Install to the IBM
compatible PC
G3L-RBEA Fnet remote I/F module
1Mbps base band, Twisted pair cable
G3L-RBOA Fnet remote I/F module
1Mbps base band, Optical fiber cable
G0L-SMIA Fnet single I/F module
12 / 24VDC input, 16 points
G0L-SMQA Fnet single I/F module
Relay output, 1A/point, 16 points
G0L-SMHA Fnet single I/F module 12 / 24VDC input, 8 points
Relay output, 1A/point, 16 points
Fnet
modules
G0L-FREA Repeater for Fnet
Converter G0L-FOEA Optical ↔Electrical converter
G0L-FAPA Power module for active coupler
G0L-FABA Base board for active coupler
G0L-FACA Active coupler
Active
coupler
G0L-FADA Dummy card for active coupler
Cnet
modules G3L-CUEA Cnet I/F module (RS-232C:1ch / RS422:1ch)
G3L-PUEA Profibus-DP master module (I/O: 1K)
Network modules
Profibus-DP
I/F module G3L-PUEB Profibus-DP master module (I/O: 7K)
In 3.0 or higher
CPU O/S version
and 3.2 or higher
KGL-WIN version
Pseudo
input
switch G3S-SW32 Pseudo input switch, 32 points
Others
Dust cover G3F-DMMA Dust protector for unused slot

Chapter 2 System configuration MASTER-K
2-11
2.3 System configuration types
System configuration is classified into 3 types such as basic, computer link, and network system.
2.3.1 Basic system configuration
The basic system consists of a main base and expansion base(s). The main and expansion
base(s) are connected via expansion cable.
K200S K300S K1000S
Max. expansion level – 3 levels
Max. distance between bases – 3 m
Max. numbers of I/O module 12 modules 32 modules
Max. I/O points 384 points 512/1,024 points11,024 points
CPU K3P-07AS K4P-15AS K7P-30AS
Power supply GM6-PAFA/B/C
GM6-PDFA/B
GM4-PA1A/PA2A
GM4-PA1B/PA2B
GM4-PD3A
GM3-PA1A/PA2A
GM3-PA1B/PA2B
GM3-PD3A
Main base GM6-
B04/06/08/12M GM4- B04/06/08/12M GM3-B04/06/08M
Expansion base – GM4-B04/06/08E GM3-B04/06/08E
Expansion cable – G4C-E041/121/301 G3C-E061/121/301
Module
type
I/O module
Special-function
module
G6I-
G6Q-
G6F-
G4I-
G4Q-
G4F-
G3I-
G3Q-
G3F-
I/O number allocation
I/O number (P00, P01, …) is allocated for each module
automatically. A empty slot occupies 16 bits.
Special-function modules can be mounted on all bases and
slots with no limit on the number of modules.
1Only in 3.0 or higher CPU O/S version
Power
Main base
Expansion
base
Expansion
cable
CPU
Slot 0 Slot 1 Slot 2 Slot 3 Slot 4 Slot 5 Slot 6 Slot 7
Power
Slot 0 Slot 1 Slot 2 Slot 3 Slot 4 Slot 5 Slot 6 Slot 7

Chapter 2 System configuration MASTER-K
2-12
2.3.2 Computer link system
When a CPU module is connected with external devices (such as computer or printer, etc.)
via RS-232C or RS-422/485 protocol by using computer link module, it is called as computer
link system. For details about computer link system, please refer user’s manual of MK
computer link modules.
Remark
The maximum number of Cnet modules that can be mounted simultaneously is as following;
K200S : 2 modules K300S : 4 modules K1000S : 8 modules
Cnet modules can be mounted only main base board. (Not available for expansion base board)
In 3.0 or higher CPU O/S version, Cnet module can be mounted on a main or expansion base
board-

Chapter 2 System configuration MASTER-K
2-13
2.3.3 Network system
In network system, user can access and control I/O module of remote station through a
network I/F and remote I/F module. MASTER-K series uses the Fnet system to consist a
network system.
Besides, in 3.0 or higher CPU O/S version and in 3.2 or higher KGL-WIN version, user who want
to use other network system can use the Dnet I/F system or Profibus I/F to construct a network
system. (Dnet I/F system or Profibus I/F system is available for K300S and Profibus I/F system is
available for K1000S)
Please refer the user’s manual of Fnet network module for details.
Remark
1. Fnet network module can be mounted on main a base board only. It can not be mounted on a
expansion base board
The maximum number of Fnet modules that can be mounted simultaneously is as following;
K300S: 2 modules K1000S : 4 modules
2. In 3.0 or higher K300S/1000S CPU O/S version , high-speed link communication module can
be mounted on a main or expansion base board and the maximum number that can be
mounted simultaneously is 4
3. The remote system has same configuration with a basic system configuration. However, the
following modules can not be used on the remote system which a Fnet remote I/F module is
mounted.
PID control module G4F-PIDA G3F-PIDA
Positioning module G4F-POPA G3F-POPA
G4F-POPB G3F-POAA
Analog timer module G4F-AT3A G3F-AT4A
Fnet I/F module G4L-FUEA G3L-FUEA
Cnet I/F module G4L-CUEA G3L-CUEA
Example) K300S Network system
GM4-PA2A
K4P-15AS
G4L-FUEA
GM4-PA1A
K4F-RBEA
Fnet I/F module
Main base
Fnet remote
I/F module
The above modules can not
be mounted on these slots