LuxaFlex RecessFix User manual

25/AU10
Installation and User’s manual PB - EN
Subject to technical changes
Installation TopFix / RecessFix [R1]
their necks. To avoid strangulation and entanglement, keep cords out of
Do not damage the product when using a sharp knife to open
the packaging! Fitting screws: Use a size-2 screwdriver (PO-
ZIDRIVE) or use an electric screwdriver at it’s lowest torque.
use the original screws enclosed, to prevent malfunctioning
from using too thick screw heads!
WARNING
Model
Installation and User manual
Removal
2-A1 2-A2
1
Clip installation
2
4-A 4-B
Installation
To lower the shade To raise the shade
Rail installation sequence on Clips
3
Adjust control height
For installation height from
1.5m, the tassel must be
at least 1.5m from the
height, push the tassel cap
up the cord and tie a knot
on the required height.
the knot and click the
enclosed transparent part
of the tassel on the cap.
For installation height on/
below 1.5m, the operation
length, push the tassel cap
knot as high as possible,
then cut the cord under
the knot and click the
enclosed transparent part
of the tassel on the cap.
Click
Product width Number of parts

25/AU10
Installation and User’s manual PB - EN
Subject to technical changes
FaceFix installation to a window frame / wall [F1]
their necks. To avoid strangulation and entanglement, keep cords out of
Do not damage the product when using a sharp knife to open
the packaging! Fitting screws: Use a size-2 screwdriver (PO-
ZIDRIVE) or use an electric screwdriver at it’s lowest torque.
use the original screws enclosed, to prevent malfunctioning
from using too thick screw heads!
WARNING
Model
Installation and User manual
Removal
2-A1 2-A2
1
Clip installation
2
Installation Rail installation sequence on Clips
4-A 4-B
To lower the shade To raise the shade
Click
3
Adjust control height
For installation height from
1.5m, the tassel must be
at least 1.5m from the
height, push the tassel cap
up the cord and tie a knot
on the required height.
the knot and click the
enclosed transparent part
of the tassel on the cap.
For installation height on/
below 1.5m, the operation
length, push the tassel cap
knot as high as possible,
then cut the cord under
the knot and click the
enclosed transparent part
of the tassel on the cap.
Product width Number of parts