Martor SECUMAX OPTICUT 436 Instruction Manual

01/0419.10.2018
SECUMAX OPTICUT
NO. 436
SAFETY KNIFE WITH CONCEALED BLADE, PLASTIC MATERIAL GUIDE AND METAL GLIDE FOOT.
Order No. 436.00
Glides over the material. And right through the middle.
For „pull“ cutting.
You are looking for a film and foam cutter that eortlessly
cuts harder and stronger film? One that‘s not afraid of stub-
born foam? You have found the best possible solution with
the SECUMAX OPTICUT. Its Teflon-coated, metal foot makes
it both extremely abrasion resistant and easy to slide. Glide
with jam less ease through whatever material you want to
cut. Ideal for „pull“ cutting.
4-times usable blade
Before you need to change your blade, you have the option
of rotating it multiple times. Four times to be precise. In this
way, you can get so much more out of your blade. Practical
for you, favourable for your company!
Work ergonomically
It‘s easy to work ergonomically with the SECUMAX OPTICUT.
Your fingers will be delighted with the sizable grip, your
thumb with the additional curving at the front of the handle.
Glide cutting couldn‘t be more comfortable.
Cut clean
Whether cutting foam or film, the bendable plastic materi-
al-guide reliably stops material jamming in front of the blade.
The same guide simultaneously protects your fingers from
blade contact.
Extremely robust
The glide foot, made of Teflon-coated metal, is both durable
and robust. The foot and the similarly robust handle are firm-
ly screwed together; you will be sure to enjoy your cutting
tool for an extended period of time.
Easy blade change
Blade change is performed using the small, rotating bracket
found on the cutter side. Swing, press and release the guide
foot. The blade is housed within the foot. Replace or rotate
the blade before pushing everything back into place.
Safety technology
TECHNICAL DATA SHEET
Concealed blade – a maximum degree of
safety
The SECUMAX OPTICUT blade is not an
open one, but is hidden from people and
goods. This provides you with the highest
degree of safety from cut injuries and from
damage to goods.
Technical data sheet › SECUMAX OPTICUT

02/0419.10.2018Technical data sheet › SECUMAX OPTICUT
USAGE
Main cutting materials
PRODUCT FEATURES
Technical features
Maximum safety Tool-less blade change Very abrasion resistant Very ergonomic
4-times usable blade Cutting depth For right and left hander Printable for promotional
purposes
Optional blade
Installed blade
Cardboard: 1-ply Wrapping, stretch, and
shrink foil
Plastic strapping band Layers of foil or paper
Coated film Laminated film Foam, polystyrene Textile, material
NO. 37040
0,40 mm, deep-edged
NO. 13730
0,30 mm, stainless
NO. 83730
0,30 mm, stainless, TiN coated
BLADE CHANGE
Lift the catch and move down-
wards until its end covers the
blade change button.
Press the catch and remove the
metal foot from the handle. Repla-
ce or reverse the blade.
Press the catch again and insert
the metal foot back into the hand-
le until it clicks. Check that the
foot is correctly inserted.
Move the catch back into the star-
ting position.

03/0419.10.2018
SAFETY CERTIFICATE
Certificates and awards
PRODUCT AND PACKAGING DETAILS
Order No. NO. 436.00
Knife size (L x W x H) 112 x 19 x 84.5 mm
Weight knife 74.0 g
Basic material Plastic
Cutting depth 7.5 mm
Packaging unit 1 on self-service card
Size Single unit box 110 x 0.8 x 242 mm
Weight single unit box 91.0 g
EAN Code single unit box 4002632905858
Quantity in outer pack 5 knives
Size outer pack 120 x 86 x 245 mm
Weight outer pack 520.2 g
EAN Code outer pack 4002632957178
Customs tari number 82149000
SECURITY ADVICE
To ensure that you use your new MARTOR knife safely and
most e ectively, please read and note the following user-in-
structions. Please keep the written guide in a safe place so
that you can access it at any time.
1. General application instructions: Please use the product
carefully for cutting work only and not for any purposes
other than those that are intended. Please take the correct
handling and the proper use of the knives into account in this
regard.
2. Special application instructions to avoid the danger of in-
juries: Only use knives that are in perfect condition and have
sharp, clean and undamaged blades. employ the utmost care
when handling the knives.
CAUTION: The blade is sharp and can result in serious and
deep cuts. Therefore, never reach into the blade! To reduce
the danger of injuries, hold the hand that is being used to
restrain and stabilise the cutting base in such a manner that
the restraining hand or even other body parts are not endan-
gered in the event that the knife slips.
3. Replacement of spare parts: Replace any blades that be-
come dull at the right time! Use only the replacement blades
available at MARTOR for this purpose. Dispose of old blades
in a proper fashion. They should not be placed in a waste pa-
per bin, as this poses a considerable danger of injuries. Never
perform any repairs yourself. If the knife displays signs of ag-
ing or other wear, e.g. function problems when changing the
blade or in the handling of the blade pushers, then it must be
rejected and replaced with a new one. Any modifications or
manipulations to the product are prohibited, as they impair
the product safety. CAUTION: There is an extremely high dan-
ger of injuries here!
4. Non-use of the knife: Always secure the blade in such a
way that injuries due to cuts are excluded. Store the knife in
a secure place.
5. Care instructions: Always keep the knife clean and do not
expose it to unnecessary humidity to safeguard a long ser-
vice life.
CAUTION: No liability will be assumed for consequential loss-
es. Subject to technical changes and errors! This knife does
not belong in the hands of children!
SERVICES OFFERED
Training video Technical data sheet Consulting service
Date of issue 20.12.2017
Certification GS certificate NO. S 60125853
Technical data sheet › SECUMAX OPTICUT

04/0419.10.2018Technical data sheet › SECUMAX OPTICUT
ACCESSORIES
MANUFACTURER
USED BLADE
CONTAINER
NO. 9810
You can fill the USED BLADE CONTAINER with the content of
your SAFEBOX. Or directly with your used blades. When the
box is full, turn the lid until it shuts. Now the box cannot be
reopened. The next step is to safely and completely dispose
of the filled USED BLADE CONTAINER.
WALL MOUNT BRACKET
USED BLADE
CONTAINER
NO. 9845
Include it in your order now! With this mounting bracket you
can fix your USED BLADE CONTAINER to a central location.
Use the clamp and screws and nuts supplied with the prod-
uct to attach it to either a pipe or a rod.
SAFEBOX
NO. 108000
The SAFEBOX is large enough to store a large number of
used blades safely. And at the same time, it is compact
enough to carry on you. The two slits are not only used for
filling, but also to „shorten“ your snap-o blades. When your
SAFEBOX is full, empty it into your USED BLADE CONTAINER.
MARTOR KG | Lindgesfeld 28 | 42653 Solingen | Germany
T [phone] | F [phone] | [e-mail] | www.martor.com