Mercia Garden Products 03PTMBPN0406BR-V1 User manual
2mm Drill bit
x2
Pressure Treated Timber
Your building has been pressure treated.
Pressure treating is a chemical process which helps to protect wood against adverse weather which could
lead to rot or insect damage.
The most common chemicals used to pressure treat wood are Alkaline Copper Quaternary (ACQ),
Copper Azole (CA), and Micronized Copper Quaternary (MCQ).
Safety: Always wear gloves, eye protection and a dust mask when handling wood. Due to chemicals in
pressure treated wood, never burn its sawdust or scraps; instead dispose in a landll.
REGISTER FOR YOUR
ANTI-ROT
GUARANTEE TODAY
PLEASE SCAN HERE:
Before assembly
please make sure you have a
suitable base ready to erect your
building
MADE IN GREAT BRITAIN
Overall Dimensions:
Width = 1966mm
Depth = 1432mm
Height = 2140mm
Base Dimensions:
Width = 1824mm
Depth = 1269mm
2
14
5
3
6 7
18
8
911
12
13
14
15
16
17
20
50mm Screw x 35
40mm Screw x 27
70mm Screw x 71
10
19
30mm Screw x 8
Back Panel QTY 2
AI-S22MBVCPP837X1762-V1
Left Plain Panel QTY 1
AI-S22MBVCPP1119X900-V1
Left Gable QTY 1
AI-S21MBPGTL1119X393-V1
Right Gable QTY 1
AI-S21MBPGTR1119X393-V1
Roof QTY 2
AI-S22FEPR971X1428-V1
Front Panel QTY 2
AI-S22MBVCPP837X900-V1
Right Plain Panel QTY 1
AI-S22MBVCPP557X900-V1
Top Panel QTY 2
AI-S21MBVCPP837X352-V1
Right Bar Top QTY 1
AI-03S21MBSHFCO632X254-V1
Plain Bar Top QTY 2
AI-03S21MBSHF658X254-V1
Left Bar Top QTY 1
AI-03S21MBSHFCO254X1194-V1
Ridge Bar 27x70x1674mm QTY 1
F2770-1674mm
Front Cover Trim 12x56x1848mm QTY 1
S1256-1848mm
Side Cover Trim 12x56x1269mm QTY 2
S1256-1269mm
Roof Cover Trim 12x80x1130mm QTY 1
S1280-1130mm
Fascias 12x95x1428mm QTY 2
S1295-1428mm
Side Fascia 12x95x1966mm QTY 2
S1295-1966mm
Bar Support 27x44x258mm QTY 2
F2744-G-298mm
Front Post 75x75x2100mm QTY 2
PI-14-0306
Back Post 75x75x1800mm QTY 2
PI-14-0304
Corner Brace QTY 2
PI-07-0012
21
Nail Bag
There may be extra screws present in the nail bag
Contents:
50mm Screw x 12
40mm Screw x 11
70mm Screw x 21
20
Bar Support 27x44x258mm QTY 1
F2744-G-298mm
15
Roof Cover Trim 12x80x1130mm QTY 1
S1280-1130mm
Front Panel QTY 1
AI-S22MBVCPP837X900-V1
6
1
Back Panel QTY 1
AI-S22MBVCPP837X1762-V1
Roof Panel Extension QTY 1
AI-S22FEPR837X1428-V1
22
Cover Trim Extension 12x56x837mm QTY 1
S1256-837mm
23
Fascia Extension 12x95x837mm QTY 2
S1295-837mm
24
Plain Bar Top Extension QTY 1
AI-03S21MBSHF837X254-V1
8
Top Panel QTY 1
AI-S12MBVCPP837x352-V1
26
Ridge Bar 27x70x2511mm QTY 1
F2770-2511mm
25
Overall Dimensions:
Width = 2803mm
Depth = 1432mm
Height = 2140mm
Base Dimensions:
Width = 2661mm
Depth = 1269mm
Extension Pack
03PTMBPN0403BRPB-V1
Nail Bag
There may be extra screws present in the nail bag
If Extension Pack has been purchased, please follow
steps labelled ‘Extension Pack’ where present
Contents:
Step 1
Parts Needed- No.1 QTY 2
- No. 19 QTY 2
Stand the Back Panels (No. 1) upright as shown,
with the larger gap between the panel framing
at the bottom, as per the measurements on the
diagram. Fix together in an alternating pattern
using 4x70mm screws
Place Corner Posts 75x75-1800mm (No. 19) to
either side ush with the inside of the panel.
Attach the post (No.19) to the back panel
(No.1) using 4x70mm screws per post, xing
through the panel into the post.
12x70mm Screws
Pre drill
hole
70mm
screw
Ariel View
767mm
868mm
IMPORTANT: Pre-drill before xing screws.
1
19 1
1
19
19
Extension Pack
Step 1A
Parts Needed- No.1 QTY 3
- No. 19 QTY 2
Stand the Back Panels (No. 1) upright as
shown, with the larger gap between the
panel framing at the bottom, as per the
measurements on the diagram. Fix
together in an alternating pattern using
4x70mm screws per join.
Place Corner Posts 75x75-1800mm (No.
19) to either side ush with the inside
of the panel.
Attach the post (No.19) to the back
panel (No.1) using 4x70mm screws per
post, xing through the panel into the
post.
16x70mm Screws
Pre drill
hole
70mm
screw
Ariel View
767mm
868mm
IMPORTANT: Pre-drill before xing screws.
1
19 1
1
19
19
1
IMPORTANT: Pre-drill before xing screws.
Step 2
Parts Needed- No.6 QTY 2
- No. 18 QTY 2
Stand the Front Panels (No.6) upright as
shown. Fix together using 4x70mm
screws in an alternating pattern.
Place the Corner Posts 75x75 - 2100mm
(No.18) at either side ush with the
outside of the panels.
Attach the Corner Posts (No.18) to the
Front Panels (No.6) using 4x70mm
screws per post, xing through the
panel into the post.
12x70mm Screws
Ariel View
Pre drill
hole
70mm
screw
6
18
6
18
6
18
Extension Pack
Step 2A
Parts Needed- No.6 QTY 2
- No. 18 QTY 2
Stand the Front Panels (No.6) upright as
shown. Fix together using 4x70mm
screws in an alternating pattern.
Place the Corner Posts 75x75 - 2100mm
(No.18) at either side ush with the
outside of the panels.
Attach the Front Posts (No.18) to the
Front Panels (No.6) using 4x70mm
screws per post, xing through the panel
into the post.
16x70mm Screws
Pre drill
hole
70mm
screw
Ariel View
IMPORTANT: Pre-drill before xing screws.
6
18
6
18
6
18
6
Step 3
Parts Needed- No.3 QTY 1
Place the Left Plain Panel (No.3) ush
to the inside of the post (No.19).
Fix the Left Plain Panel (No.3) to the
Post (No.19) using 4x70mm Screws.
4x70mm Screws
Pre drill
hole
70mm
screw
Ariel View
IMPORTANT: Pre-drill before xing screws.
1
19
3
11919
19
3
Step 4
Parts Needed- No.6 QTY 2
- No. 18 QTY 2
Place the Post (No.18) attached to the front
panels against the Left Panel (No.3),
framing facing inwards.
Ensure that the panel sits ush to the
outside of the post.
Fix the Left Panel (No.3)to the Post (No.10)
using 4x70mm screws.
4x70mm Screws
Pre drill
hole
70mm
screw
Ariel View
IMPORTANT: Pre-drill before xing screws.
6
18
6
18
18
18
18
6
6
6
3
Step 5
Parts Needed- No.7 QTY 1
Place the Right Plain Panel (No.7)
against the front panel Post (No.18),
with the framing facing inwards.
Ensure that the panel sits ush to the
outside of the post.
Fix the Right Plain Panel (No.7) to the
Post (No.18) using 4x70mm screws.
4x70mm Screws
Ariel View
Pre drill
hole
70mm
screw
7
IMPORTANT: Pre-drill before xing screws.
6
18
18
7
7
Pre drill
hole
70mm
screw
Step 6
Parts Needed- No.11 QTY 1
Place the Left Bar top (No.11) on top of
the Left Plain Panel (No.3).
Secure using 6x70mm screws going
through the Bar top cladding and into
the plain panel framing below.
Using 2x50mm screws, x the Left Bar
top to the back panel, ensuring that
the Bar top cladding sits ush with the
top of the back panel framing
2x50mm Screws
6x70mm Screws
Ariel View
50mm
screw
IMPORTANT: Pre-drill before xing screws.
11
11
Ariel View
Pre drill
hole
70mm
screw
Step 7
Parts Needed- No.10 QTY 2
Place the Plain Bar tops (No.10) on top of
the Front Panels (No.6).
Secure using 3x70mm screws per bar top,
going through the Bar top cladding and
into the front panel framing below.
Using 2x50mm screws, x the Plain Bar
top to the Left Bar top from the underside
of the bar tops.
Using 2x50mm screws, x the Plain Bar
tops together in alternating pattern from
the underside of the bar tops
4x50mm Screws
6x70mm Screws
50mm
screw
IMPORTANT: Pre-drill before xing screws.
10
10
10
10
IMPORTANT: Pre-drill before xing screws.
Ariel View
Pre drill
hole
70mm
screw
Extension Pack
Step 7A
Parts Needed- No.10 QTY 2
- No.22 QTY 1
Place the Plain Bar tops (No.10) and the Plain
Bar top Extension (No.22) on top of the Front
Panels (No.6).
Secure using 3x70mm screws per bar top,
going through the Bar top cladding and into
the front panel framing below.
Using 2x50mm screws, x the Plain Bar top to
the Left Bar top from the underside of the bar
tops.
Using 2x50mm screws per join, x the Plain
Bar tops and the Plain Bar top extension
together in alternating pattern from the
underside of the bar tops
6x50mm Screws
9x70mm Screws
50mm
screw
837mm
658mm 658mm
10
10
1022
10
22
Ariel View
Pre drill
hole
70mm
screw
Step 8
Parts Needed- No.9 QTY 1
Place the Right Bar top (No.9) on top of
the Right Plain Panel (No.7).
Secure using 5x70mm screws going
through the Bar top cladding and into
the plain panel framing below.
Using 2x50mm screws, x the Right Bar
top to the Plain Bar top (No.10) from
the underside of the bar tops
2x50mm Screws
5x70mm Screws
50mm
screw
IMPORTANT: Pre-drill before xing screws.
9
9
Pre drill
hole
50mm
screw
Step 9
Parts Needed- No.20 QTY 2
Place the bar supports (No.20) underneath
the bar tops as shown in the illustration.
Place the rst underneath the Right Bar Top
(No.9) ush to the edge of the bar and the
right plain panel (No7). The second should
be positioned centrally between the Plain
Bar Tops (No.10) ush to the edge of the bar
top and the Front Panels (No.6)
Secure using 4x50mm screws per Bar
support (No.20)ensuring to o set the
screws location so to not split the bar
support.
8x50mm Screws
IMPORTANT: Pre-drill before xing screws.
20
20
20
Pre drill
hole
50mm
screw
Extension Pack
Step 9A
Parts Needed- No.20 QTY 3
Place the bar supports (No.20) underneath
the bar tops as shown in the illustration.
Place the rst underneath the Right Bar Top
(No.9) ush to the edge of the bar and the
right plain panel (No7). The second and
third should be positioned centrally
between the Plain Bar Tops (No.10) and the
Plain Bar top Extension (No.22), ush to the
edge of the bar top and the Front Panels
(No.6).
Secure using 4x50mm screws per Bar
support (No.20)ensuring to o set the
screws location so to not split the bar
support.
12x50mm Screws
IMPORTANT: Pre-drill before xing screws.
20
20 20
20
21mm
Pre drill
hole
50mm
screw
Step 10
Parts Needed- No.4 QTY 1
- No.5 QTY 1
Place the Right Gable (No.5) and the Left
Gable (No.4) between the Posts, the front
of the gables will sit ush to the top of the
front posts. The back of the gables will sit
21mm above the back posts.
Secure each gable to the posts using
4x50mm screws. When securing to the
back post, oset the screws to ensure the
framing does not split
8x50mm Screws
IMPORTANT: Pre-drill before xing screws.
5
4
Pre drill
hole
50mm
screw
Step 11
Parts Needed- No.8 QTY 2
Place the Top Panels (No.8) between the
front posts (No.20), position them to be
ush with the bottom of the gables.
Secure the Top panels to the Posts using
2x50mm screws.
Secure the Top panels together using
4x50mm screws in an alternating pattern.
8x50mm Screws
IMPORTANT: Pre-drill before xing screws.
8
8
Pre drill
hole
50mm
screw
Extension Pack
Step 11A
Parts Needed- No.8 QTY 3
Place the Top Panels (No.8) between
the the front posts (No.20), position
them to be ush with the bottom of
the gables.
Secure the Top panels to the Posts
using 2x50mm screws.
Secure the Top panels together using
4x50mm screws per join in an
alternating pattern.
12x50mm Screws
IMPORTANT: Pre-drill before xing screws.
8
8
8
SILICONE
SEALANT
Pre drill
hole
70mm
screw
Step 12
Parts Needed- No.2 QTY 2
Locate the Roof panels (No.2) onto the
top of the building. Use Silicone sealant
along the join of the roof panels and x
together using 4x70mm Screws in an
alternating pattern
4x70mm Screws
IMPORTANT: Pre-drill before xing screws.
2
2
SILICONE
SEALANT
Extension Pack
Step 12A
Parts Needed- No.2 QTY 2
- No.26 QTY 1
Locate the Roof panels (No.2) and the
Roof Panel Extension (No.26) onto the top
of the building. Use Silicone sealant along
the join of the roof panels and x together
using 4x70mm Screws per join in an
alternating pattern
8x70mm Screws
Pre drill
hole
70mm
screw
IMPORTANT: Pre-drill before xing screws.
2
2
26
Step 13
Parts Needed- No.12 QTY 1
- No.21 QTY 2
Fix the Corner Brace (No.21) to each end of
the Ridge Bar (No.12) using 2x30mm screws
per corner brace.
Locate the Ridge bar (No.12) to the inside of
the building between the front posts, secure
using 2x30mm screws per corner brace
**Tip: the ridge bar should sit ush with
the underside of the roof, and ush with
the top panel framing
Fix the ridge bar to the front panels using
3x50mm screws going through the ridge bar
and into the panel framing, ensuring the top
panels are level
8x30mm Screws
3x50mm Screws
Pre drill
hole
30mm
screw
50mm
screw
IMPORTANT: Pre-drill before xing screws.
21 12
12
21
21
Extension Pack
Step 13A
Parts Needed- No.21 QTY 1
- No.25 QTY 1
Fix the Corner Brace (No.21) to each end
of the Ridge Bar (No.25) using 2x30mm
screws per corner brace.
Locate the Ridge bar (No.25) to the inside
of the building between the front posts,
secure using 2x30mm screws per corner
brace
**Tip: the ridge bar should sit ush with
the underside of the roof, and ush with
the top panel framing
Fix the ridge bar to the front panels using
5x50mm screws going through the ridge
bar and into the panel framing, ensuring
the top panels are level
8x30mm Screws
5x50mm Screws Pre drill
hole
30mm
screw
50mm
screw
IMPORTANT: Pre-drill before xing screws.
21 25
25
21
21
Pre drill
hole
70mm
screw
Step 14
Fix the roofs to the Building using 70mm
screws, ensuring to go through into the
panel framing below.
Ensure there is no more than 300mm
between each screw.
14x70mm Screws
IMPORTANT: Pre-drill before xing screws.
Pre drill
hole
70mm
screw
Extension Pack
Step 14A
Fix the roofs to the Building using
70mm screws, ensuring to go through
into the panel framing below.
Ensure there is no more than 300mm
between each screw.
20x70mm Screws
IMPORTANT: Pre-drill before xing screws.
Step 15
Parts Needed- No.15 QTY 1
Fix the Roof cover trim (No.15) to the
inside of the roof, equally spacing over
the join in the roof, secure using 4x40mm
screws in an alternating o set pattern.
4x40mm Screws
Pre drill
hole
40mm
screw
IMPORTANT: Pre-drill before xing screws.
15
Extension Pack
Step 15A
Parts Needed- No.15 QTY 2
Fix the Roof cover trims (No.15) to the
inside of the roof, equally spacing over the
joins in the roof, secure using 4x40mm
screws per join in an alternating o set
pattern.
8x40mm Screws
Pre drill
hole
40mm
screw
IMPORTANT: Pre-drill before xing screws.
15
15
Step 16
Parts Needed- No.16 QTY 2
- No.17 QTY 2
Fix the Fascias (No.16 and No.17) to
the sides of the roof, secure using
4x40mm screws for the front and back
fascia (No.16) and 3x40mm screws for
the side fascias (No.17).
14x40mm Screws
Pre drill
hole
40mm
screw
If a Shutter Pack has been Purchased, Please move onto
the Shutter Instruction from here, otherwise continue
onto the next page.
IMPORTANT: Pre-drill before xing screws.
17
17
16
16
Extension Pack
Step 16A
Parts Needed- No.16 QTY 2
- No.17 QTY 2
- No.24 QTY 2
Fix the Fascias (No.16, No.17 and
No.24) to the sides of the roof, secure
using 4x40mm screws for the front
and back fascia (No.16), 3x40mm
screws for the side fascias (No.17) and
2x40mm for the Fascia Extensions
(No.24).
18x40mm Screws
Pre drill
hole
40mm
screw
IMPORTANT: Pre-drill before xing screws.
17
17
16
16 24
24
Step 17
Parts Needed- No.13 QTY 1
- No.14 QTY 2
Fix the Cover trims (No.13 and No.14) to the
bottom of the window openings, ensuring
they sit ush to the top of the bar.
Secure using 4x40mm screws for the front
Cover trim (No.13), 3x40mm screws for the
side cover trims (No.14).
Cover trims may require cutting to size.
9x40mm Screws
Pre drill
hole
40mm
screw *Cut down
trims to t
IMPORTANT: Pre-drill before xing screws.
14
13 14
Extension Pack
Step 17A
Parts Needed- No.13 QTY 1
- No.14 QTY 1
- No.24 QTY 1
Fix the Cover trims (No.13, No.14, and
No.24) to the bottom of the window
openings, ensuring they sit ush to the
top of the bar.
Secure using 4x40mm screws for the
front Cover trim (No.13), 3x40mm screws
per side cover trims (No.14) and the
cover trim extension (No.24).
Cover trims may require cutting to size.
12x40mm Screws
Pre drill
hole
40mm
screw *Cut down
trims to t
IMPORTANT: Pre-drill before xing screws.
14
13
14
24
It is ESSENTIAL that you apply wood
treatment immediately after the building
has been assembled.
¡
¡
¢
¡
¡
£
1
2
3
4
5
6
7
8
9
¢
£
¤
2
1
¤
3
4
¥
¦
£
§
¡
£
12
£
§
¡
REGISTER FOR YOUR
ANTI-ROT
GUARANTEE TODAY
PLEASE SCAN HERE:
Other manuals for 03PTMBPN0406BR-V1
1
Other Mercia Garden Products Outdoor Furnishing manuals
Mercia Garden Products
Mercia Garden Products 0628LOG136-V4 Instruction manual
Mercia Garden Products
Mercia Garden Products 01OVEABKSTR-V2 Instruction manual
Mercia Garden Products
Mercia Garden Products 07PORCOR0909-V1 User manual
Mercia Garden Products
Mercia Garden Products 0619LOG016-V4 Instruction manual
Mercia Garden Products
Mercia Garden Products 03TGCORSE0407-V1 Instruction manual
Mercia Garden Products
Mercia Garden Products Helios 03HEL1010DDFW-V3 Instruction manual
Mercia Garden Products
Mercia Garden Products 01OAOSB0705-V2 User manual
Mercia Garden Products
Mercia Garden Products 01OVLPA1006DDFW-V1 Instruction manual
Mercia Garden Products
Mercia Garden Products 01LOGST-V1 Instruction manual
Mercia Garden Products
Mercia Garden Products 0628LOG171-V4 Instruction manual
Mercia Garden Products
Mercia Garden Products 01OVLPRA0604SDFW-V1 Instruction manual
Mercia Garden Products
Mercia Garden Products 0628LOG125-V4 Instruction manual
Mercia Garden Products
Mercia Garden Products 03LBRO1008-V7 Instruction manual
Mercia Garden Products
Mercia Garden Products 0628LOG118-V4 Instruction manual
Mercia Garden Products
Mercia Garden Products 01LOGHF-V1 User manual
Mercia Garden Products
Mercia Garden Products 01OSBA0304SDNW-V1 Instruction manual
Mercia Garden Products
Mercia Garden Products 0619LOG017-V4 Instruction manual
Mercia Garden Products
Mercia Garden Products 0619LOG001-V4 Instruction manual
Mercia Garden Products
Mercia Garden Products 01GRO0606-V1 Instruction manual
Mercia Garden Products
Mercia Garden Products 01VINLOG0307-V1 Instruction manual
Mercia Garden Products
Mercia Garden Products 01VINLOG0303-V1 Instruction manual
Mercia Garden Products
Mercia Garden Products 0628LOG131-V3 Instruction manual
Mercia Garden Products
Mercia Garden Products 01OVLPA0507DDFW-V1 Instruction manual
Mercia Garden Products
Mercia Garden Products 0619LOG006-V4 Instruction manual
Popular Outdoor Furnishing manuals by other brands
Sunjoy
Sunjoy Bourbon 110203062 manual
Jet-Line group
Jet-Line group LUXOR instruction manual
Premium Poly Patios
Premium Poly Patios Skyline SK-0402-36 Assembly instructions
Blumfeldt
Blumfeldt KD2-BBL-WAO 10029146 manual
Agora Outdoor Living
Agora Outdoor Living PC-15000 Assembly instructions and owner's manual
Voyager Dock
Voyager Dock Aluminum Bench manual