METHVEN Naida 02-8016 User manual

Methven Australia Pty Ltd
ABN 15 104 813 390
Melbourne, Australia
www.methven.com
www.methven.com
Naida Shower Mixer
02-8016
Use of this product in non-domestic applications voids warranty.
Avoid restrictive piping, fittings and sharp angled bends when plumbing the mixer.
All pipe work must be thoroughly flushed prior to the installation of the mixer.
NEFA inline filters must be installed on both hot and cold supplies.
Do not remove the ceramic cartridge from the mixer when installing.
Damage caused by hydrostatic testing is not covered by our warranty.
IMPORTANT
Please read all of the instructions before installation
Installation Guide
MAY 2017 MA433349 Spec 001
LN: WMKA21005

We recommend that this product is installed by a licensed plumber.
THE METHVEN GUARANTEE
The warranty statement shall apply to all tapware & showers supplied by Methven
For more information visit www.methven.com
THIS WARRANTY ISSUED BY: Methven Australia Pty Ltd, Melbourne Australia
Technical Specifications
Operating Pressure:
Operating Temperatures:
‘In situ’ Testing
The maximum working pressure of the ceramic cartridge is 1000kPa. Do
not hydrostatic test the installation with this mixer installed. Damage to
the ceramic cartridge may occur, voiding our warranty.
For Mains Pressure (Equal Pressure) systems fit
shower as supplied. Red & Blue jets not required.