METHVEN Kiri 3 User manual

Kiri 3 Hole Faucet
for Basin
Operating Pressure: Min. 35kPa (5 PSI), Max. 1000kPa (145 PSI). Recommended
150-500kPa (22-72 PSI). Install a pressure limiting valve if supply exceeds 1000kPa.
Operating Temperature: Recommended 50ºC (122ºF) at the mixer.
Max 80ºC (176ºF).
Inlet Connections:All 1/2” BSP
Methven warrants this product against manufacturing defects and that it is
suitable for use under the operating conditions specified in this instruction sheet.
For your warranty please refer to www.methven.biz or call Customer Service
New Zealand
0800 804 222
Australia
1800 035 330
USA
800 975 5409
Installation Guide
Technical Specifications
UK
0800 195 1602
433173 Issue A

R35mm ( 1
3/8
”) Min.
20mm (13/16”)
DO NOT CRUSH
HOSE OR
SWAGED ENDS
DO NOT STRETCH OR TWIST HOSES
CORRECT
INCORRECT
All pipework must be thoroughly flushed prior to the installation of the mixer. Inline
filters must be fitted on both hot and cold supplies to prevent foreign particles damaging
the ceramic cartridge.
IMPORTANT
Please read all of the instructions before installation
This faucet is designed for equal and unequal pressure systems.
This mixer is not recommended for use in uncontrolled heating systems such as
wetbacks or solar heater units.
32 - 42
(1 1/4” -
15/8”)
40 max
(1 9/16”)
M5 Grubscrew
Stream shaper
Body Assembly
O-ring
Handle plate
Lock nut
Handle
Mounting nuts
Mounting plate
Mounting gasket
O-ring
Base ring
Cold
Hot
Mounting stud
Inlet
Hot
Cold
2.5mm Allen key