Mitel MiVoice 6910 User manual

Mitel MiVoice 6910 IP Phone
58015954 REV00
RELEASE 1.5 USER GUIDE FOR MIVOICE BUSINESS

NOTICE
The information contained in this document is believed to be accurate in all respects but is not warranted
by Mitel Networks Corporation (MITEL®). The information is subject to change without notice and should
not be construed in any way as a commitment by Mitel or any of its affiliates or subsidiaries. Mitel and its
affiliates and subsidiaries assume no responsibility for any errors or omissions in this document. Revisions
of this document or new editions of it may be issued to incorporate such changes.
No part of this document can be reproduced or transmitted in any form or by any means - electronic or
mechanical - for any purpose without written permission from Mitel Networks Corporation. Send an email
to [email protected] for more details.
Trademarks
The trademarks, service marks, logos and graphics (collectively “Trademarks”) appearing on Mitel's
Internet sites or in its publications are registered and unregistered trademarks of Mitel Networks
Corporation (MNC) or its subsidiaries (collectively “Mitel”) or their respective owners. Use of the
Trademarks is prohibited without the express consent from Mitel. Please contact our legal department at
[email protected] for additional information. For a list of the worldwide Mitel Networks Corporation
registered trademarks, please refer to the website: http://www.mitel.com/trademarks. Customer's use of
this product and/or software shall be in accordance with the EULA and /or other accompanying licensing
terms.
Mitel’s Power Over Ethernet (PoE) Powered Device (PD) products are covered by one or more of the U.S.
patents (and any foreign patent counterparts thereto) identified at Mitel’s website: www.mitel.com/patents.
For more information about the PD patents that are licensed, please refer www.cmspatents.com.
Mitel MiVoice 6910 IP Phone User Guide for MiVoice Business
58015954 REV00 - July 2019
®,™ Trademark of Mitel Networks Corporation
© Copyright 2019, Mitel Networks Corporation
All rights reserved

Table of Contents
1
About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Documentation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Phone Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Installation and Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
.Tips for Your Comfort and Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Overview of the 6910 IP Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Keys Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Getting Started. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Setting Up Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Operating Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Using Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Using the Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Interacting with Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Customizing Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Customizing the User Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Log Issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Phone Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Restart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Voice Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Using Other Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Setting Up a Conference Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Hot Desking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Paging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Other Advanced Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Voicemail Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Logging In to the Voicemail System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Listening To, Relaying, Saving, And Deleting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Forwarding Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Replying to a Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Leaving a Message and Using Message options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Listening to Saved Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Using Mailbox Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Mitel MiVoice 6910 IP Phone Accessory support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

MiVoice 6910 IP Phone User Guide for MiCloud Connect
2
Analog, and DHSG/EHS headsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

About This Guide
1
About This Guide
This guide explains how to use the basic features of your new Mitel MiVoice 6910 IP phone. Not all
features listed are available by default. Your system administrator has the ability to customize many
features on this phone. Contact your system administrator to find out which features and services
are available to you on your phone system.
Documentation
•Mitel MiVoice 6910 IP phone Quick Reference Guide – Contains call handling instructions and
information on other important features.
•Mitel MiVoice 6910 IP phone Installation Guide – Contains installation and instructions for setting
up, general features and functions, and basic options list customization.
Supporting Documentation
To access phone and system-specific documentation, see Mitel MiVoice 6900 Series IP Phones
Administrator Guide.
Phone Features
Feature highlights include:
• Built-in two-port, 10/100/1000 Megabyte Ethernet switch that enables you to share a connection
with your computer
• Class 2 Power-Over-Ethernet (PoE)
• 3.4" 128x48 Pixel back-lit display
• Wide-band speaker phone
• Wide-band 6900 handset
• "8 programmable paper labeled personal keys with LEDs
• Analog handset port with DHSG support
• Support for wall mounting using the 6800/6900 wall-mount kit
Installation and Setup
See the Mitel MiVoice 6910 IP phone Installation Guide included with your phone for basic installation
and physical setup information.
.Tips for Your Comfort and Safety
Do Not Cradle the Handset
Prolonged use of the handset can lead to neck, shoulder, or back discomfort, especially if you cradle
the handset between your ear and shoulder. If you use your phone a lot, you may find it more
comfortable to use a headset.

MiVoice 6920 IP Phone User Guide for MiVoice Business
2
Protect Your Hearing
Your 6910 IP phone has a control for adjusting the volume of the handset, headset, and
speakerphone. Because continuous exposure to loud sounds can contribute to hearing loss, keep
the volume at a moderate level.
Adjust the Viewing Angle
The stand for your 6910 IP phone supports two viewing angles (30° and 60°). Adjust the stand to
suit your viewing preference. For instructions on how to adjust the stand, see the 6910 IP phone
Installation Guide.

Overview of the 6910 IP Phone
1
Overview of the 6910 IP Phone
Welcome to your IP phone!
Figure 1 provides an overview of the Mitel MiVoice 6910 IP Phone components. Figure 2 on page
2 shows the ports on the back of the phone.
Figure 1: 6910 IP Phone Components
Programmable
Keys
Programmable
Keys
dialpad
Speaker/Head-
set Key
Mute Key
Hold Key
Redial Key
Goodbye Key
Settings Key
Directory Key
Transfer Key
Conference
Key
Volume
Control
LCD Screen
Voicemail
Key
Call History
Key
6910
Handset
High Quality
Speakerphone
Message Waiting
Lamp

MiVoice 6910 IP Phone User Guide for MiVoice Business
2
Figure 2: Ports on the Back of the 6910 IP Phone
Keys Description
The following table describes the keys on the Mitel MiVoice 6910 IP Phone.
Key Description
Directory key—Displays the corporate contacts from phonebook.
History key—Displays a list of your external missed, forwarded, and answered
calls.
Voicemail key—Provides access to your voicemail service (if configured).
Settings key—Provides services and static settings that allow you to customize
your phone.
Volume controls—Adjusts the volume for the ringer, handset, headset, and
speaker phone.
Pressing these keys during an active call adjusts the volume of the audio device
being used (handset, headset, or speaker).
Goodbye key—Ends an active call. The Goodbye key also exits an open list
(such as Call History) and menus (such as the Static Settings menu) without
saving changes.
Redial key—Redials the last manually dialed number displayed on the LCD
screen.
Headset Jack
Handset Jack is
hearing-aid
compatible (HAC)
PC Port Network and
Power Port
Power Adapter
Port

Keys Description
3
Keypad Keys
The 6910 IP phone has a keypad with digits from 0 through 9, a * key, and a # key. Keys 2 through
9 contain the letters of the alphabet. Following is a description of the keypad keys of the 6910 IP
phone:
Hold key—Places an active call on hold. To retrieve a held call, press the
applicable Line key.
For more information, see Placing a Call on Hold or Off Hold on the screen on
page 12.
Mute key—Mutes the microphone so that the caller cannot hear you. The LED
beside the key turns on when the microphone is on mute.
Transfer Key—Transfers the active call to another number.
Conference Key—Begins a conference call with the active call.
For more information, see Using Other Features on page 22.
Speaker/Headset key—Transfers the active call to the speaker or headset,
allowing hands-free use of the phone.
Navigation keys and select button —Multi-directional navigation keys that allow
you to navigate through the phone’s UI.
The right, left, and center navigation keys are used as softkeys.
KEYPAD KEY DESCRIPTION
0 Dials 0
Dials the Operator on a registered phone
1 Dials 1
2 ABC Dials 2
When entering text, this key enters A with one press, B with two presses, and C with
three presses
3 DEF Dials 3
When entering text, this key enters D with one press, E with two presses, and F with
three presses
4 GHI Dials 4
When entering text, this key enters G with one press, H with two presses, and I with
three presses
5 JKL Dials 5
When entering text, this key enters J with one press, K with two presses, and L with
three presses
Key Description

MiVoice 6910 IP Phone User Guide for MiVoice Business
4
Programmable Keys
There are 8 programmable keys on the 6910 IP phone.
Your system administrator can program the following operations to the programmable keys:
• Private speed calls
• Always forward calls
• Do not disturb
6 MNO Dials 6
When entering text, this key enters M with one press, N with two presses, and O
with three presses
7 P QRS Dials 7
When entering text, this key enters P with one press, Q with two presses, R with
three presses, and S with four presses.
8 TUV Dials 8
When entering text, this key enters T with one press, U with two presses, and V with
three presses
9 WXYZ Dials 9
When entering text, this key enters W with one press, X with two presses, Y with
three presses, and Z with four presses.
KEYPAD KEY DESCRIPTION
8 Programmable
keys

Getting Started
5
• Phone lock
• Make busy
• Account code
• Call history
• Auto answer
Softkeys
There are 3 softkeys on the 6910 IP phone. Your system administrator can set the required functions
to these softkeys.
Feature Access Codes
Use of some features requires dialing access codes. Ask your system administrator for a list of codes
you should use.
For more information on how to use access codes, see Feature access codes on page 23.
Getting Started
The 6910 IP phone automatically begins the startup sequence as soon as it is connected. The phone
goes through this process the first time you plug in your phone and every time you restart your phone.
The 6910 IP phone first checks the settings and looks for new configuration and firmware updates
from a configuration server. It may take a few moments while the phone downloads the latest updates.
When the configuration update is complete and your phone successfully connects to the network,
the phone displays the following Home screen.
For more information about connecting your phone, see the Mitel 6910 IP phone Installation Guide.
CAUTION: Do not unplug or remove power to the phone while the phone is checking or installing
firmware or configuration information.
Note: If the phone displays a No Service status message, the phone is not registered with the
system. For more information about registering your phone, contact your system administrator.

MiVoice 6910 IP Phone User Guide for MiVoice Business
6
Setting Up Your Phone
To use all the functions of your IP phone, your phone needs to be assigned to you and you need to
know your password for the voicemail system. You can determine whether your phone is already
assigned to you as follows:
• If the phone displays your extension, your system administrator has already assigned your phone
to you and you need not assign the phone to yourself. When your phone is in this state, you can
receive calls, make calls, and check for new messages using voicemail.
With the appropriate permissions (set by your system administrator or authorized contact), you can
log in to any Mitel 6900-Series IP phone in the system and assign your extension or phone number
to that phone.
Language
The MiVoice 6910 IP phone supports the following languages:
• English
• French
• German
• Spanish
• Spanish (Latin America)
• Portuguese
• Portuguese (Brazil)
• Dutch
• Italian
• Romanian
• Polish
• Russian
• Swedish
All on-screen text (in idle/call screens, setting menus, and applications) displays in the language
you set on your phone. For more information about setting the phone language, see Language
Settings on page 14.
Your Phone’s Display
When the phone has successfully booted up and connected to the network, the phone displays the
Home screen. This is the default screen displayed when the phone is in an idle state. Figure 3 shows
the home screen.

Operating Your Phone
7
P
Figure 3: Home Screen of the 6910 IP Phone
Home screen display information
• The first line of the home screen displays your number and the status bar.
• The second and third lines of the home screen displays the time, date, and redial information,
which is controlled by the MiVoice Business server settings.
• The fourth line displays the functions that are set to the softkeys by MiVoice Business.
Status bar
The status bar of the 6910 IP phone supports the following notification icons:
• Do not disturb
• Hotdesk
• Call forwarded always
• Headset connection
• Attempting network connection
• Call timer for external calls
Ring/Message Indicators
Operating Your Phone
This section provides an overview of the basic phone tasks.
Note: Your system administrator should have configured your number and any other administrative
features required. If your number does not display on the screen, contact your system
administrator.
WHEN INDICATOR IS IT MEANS THAT
Flashing rapidly Your phone is ringing
Flashing slowly A message or callback message is waiting on your phone
On You have placed an outgoing call
Off Your phone is idle, or you are on a call

MiVoice 6910 IP Phone User Guide for MiVoice Business
8
Placing Calls
To place a call, you can use the handset, the speakerphone, or a headset.
Using the Handset to Place a Call
1. Pick up the handset.
2. Do one of the following:
• Dial the number.
• Press the Speed Call key.
• Press the (redial) key.
3. To end the call, hang up the handset.
Using Handsfree Speakerphone
The handsfree speakerphone feature allows you to speak to someone without using the handset or
headset. Your phone must be in Speaker audio mode.
• To dial using handsfree speakerphone.
a. Press .
b. Enter the number at the dial tone.
• If you are in Speaker audio mode, lift the handset and press alternately to switch between
handsfree and handset.
• When the handset is on hook, press to disconnect the call.
The LED beside the hardkey stops blinking.
Using the Headset to Place a Call
The headset feature allows you to speak to someone without using the handset or speaker. Your
phone must be set in Headset audio mode and calls can be switched from the handset to headset by
pressing on the phone. For more information about the Audio modes, see Audio on page 15.
• To place a call using the headset:
a. Press .
b. Dial the phone number.
The LED beside the hardkey blinks red, and the call is dialed.
• To end the call, press .
The LED beside the hardkey stops blinking.
Note: The call timer on the IP 6910 phone starts only after an external call is answered.
Notes:
• When handsfree speakerphone is on, the LED beside the hardkey turns on.
• The 6910 IP phone does not support external spakerphones.

Operating Your Phone
9
Speed Call
You can use the speed call feature by setting the speed call number to a programmable key. The
system administrator can set the speed call number to the programmable key or long-press the
programmable key to set the speed call number.
To dial a stored speed call number:
1. Pick up the handset.
2. Press the Speed Call line key.
Answering Calls
When a call is ringing at your extension, the inbound caller’s name and extension are displayed on
the screen. Additionally, the line LED flashes quickly to indicate the incoming call.
To answer a call, you can use the handset, the handsfree speakerphone, or a headset. Depending
on how you set your automatic off-hook preference or how your system administrator has set this
option, you can also answer a call through your speakerphone or headset by pressing the blinking
line button.
Using the Handset to Answer a Call
1. To answer a call using the handset, do one of the following when the phone rings:
• Pick up the handset.
• Press the flashing Line key and lift the handset.
• Press the flashing Line key.
2. To end a call, hang up the handset.
Using the Speakerphone to Answer a Call
If you plan to use a speakerphone to answer calls, designate Speaker as your default auto off-hook
preference (see Audio on page 15).
1. To answer a call, press .
If your automatic off-hook preference is configured to use the speaker, press the blinking line
button.
The LED beside the hardkey lights red.
2. To end the call, press the again.
The LED beside the hardkey turns off.
Using a Headset to Answer a Call
If you plan to use a headset to answer calls, designate your wireless or wired headset as your default
auto off-hook preference (see Audio on page 15).
1. To answer a call using the headset, do one of the following:
• If you use a wired headset, press .
• If you use a wireless headset (the DHSG option must be enabled for using a wireless
headset), go off-hook to answer the call.

MiVoice 6910 IP Phone User Guide for MiVoice Business
10
• If your automatic off-hook preference is configured to use your headset, press the blinking
red line button.
The LED beside blinks red.
2. To end the call, do either of the following:
• If you use a wired headset, press again.
• If you use a wireless headset, put your headset in to the on-hook position.
The LED beside the hardkey stops blinking.
Placing a Call Using Directory
1. Press .
2. Do the following to locate a contact in the phonebook:
• Enter the first or the last name of the person you want to call.
• For each letter in the name, press the appropriate key on the dialpad until the letter is shown
in the display. For example, if the letter C is required, press the digit 2 thrice.
• Use the navigation key to correct errors.
• If the next letter in the name is on the same digit key as the previous letter, press the
navigation key before proceeding.
• If required, press to add a space between the first name and the last name.
3. Press the Enter key to look up the contact in the phonebook.
4. Do the following:
• To place the call, press the Call softkey.
• To edit the entry, press the Retry softkey.
• To exit, press .
Adjusting the Ring and Listening Volume
To adjust the volume on your phone, use the keys. The volume settings for the ringer,
handset, speakerphone, and headset are independent of one another, and you can set them as
follows:
• Adjust the volume of your phone’s ringer while the phone is ringing or while setting the ring tone
of the phone.
• Adjust the handset listening volume while the handset is off hook.
• Adjust the speakerphone volume when the LED beside is illuminated.
• Adjust the headset listening volume when the LED beside starts blinking.
Note: The audio mode setting you have selected in the Settings > User Settings > Audio> Audio
Path menu on the IP phone determines whether the call goes to speakerphone or to headset
operation. For more information, see Audio on page 15.
Note: The 6910 phone uses the contact information from the MiVoice Business Directory Server.
Note: To close the directory, press .

Using Voicemail
11
Muting a Call
Mute lets you temporarily turn your phone's handset, headset, or handsfree microphone off during
a call.
• To mute a call so that the caller does not hear you, press .
The LED beside the hardkey turns red when the mute is active.
• To unmute a call so that the caller can hear you, press again.
The LED beside the hardkey turns off.
Redial
1. To redial the last number that you manually dialed, pick up the handset (optional).
2. Press .
Using Voicemail
To access your voicemail messages, press the Voicemail hardkey or the VoiceDial softkey.
For details about voicemail, see Voicemail Overview on page 25.
Using the Call History
The call history displays recent external inbound, missed, and transferred calls, with the most recent
call listed first. Each entry in the history list displays the caller’s name or number (if available) and
the time or date of the call. Once enabled on your phone by your system administrator, the call
history functions automatically.
Viewing a List of All Calls Received, Transferred, Or Missed
1. Press .
2. Use to navigate through the missed, answered, or outgoing calls.
• The total number of missed calls is displayed in brackets and the number of new missed
calls is indicated with an *.
For example, MISSED CALLS *2(3)
• *2 indicates that there are two new (unread) missed calls from unique numbers.
• 3 indicates that the total number of missed calls (read and unread) is 3.
• The total number of answered and outgoing calls are displayed in paranthesis.
For example, OUTGOING (2)
2 indicates that the number of unread outgoing calls from a specific number is 2.
3. To view the list of missed, answered, or outgoing calls, press the Yes softkey followed by the
navigation key to scroll the list.
4. Press the Exit softkey to go back to the call history options.
Note: Mute does not work during number dial-out.
Note: To close the call history, press .

MiVoice 6910 IP Phone User Guide for MiVoice Business
12
5. Press to exit the call history option.
Placing a Call Using the Call History
1. Press .
2. Use the to scroll the list of missed, answered, or outgoing calls.
3. With the name of the person you want to call displayed on the screen, do either of the following
to dial the call:
• Pick up the handset to take the phone off hook.
• Press the button to take the phone off hook.
Interacting with Calls
This section describes the ways to interact with calls:
Placing a Call on Hold or Off Hold on the screen
• To place an active call on hold, Press .
The line key light begins to flash slowly and after a short time, the phone beeps softly to remind
you that you have a call on hold.
• To take the call off hold, do either of the following:
- Press .
- Press the flashing line key.
Transferring a Call
You can transfer a call in two ways:
• In a blind transfer, you transfer the call without the other party first answering your call.
• In a consultative transfer, you talk to the other party before completing the transfer.
To Do a Blind Transfer
1. While engaged in a call, press the .
2. Dial the number to which you want to transfer the call.
3. Do either of the following:
Note: The Call History on the 6910 IP phone provides only external incoming and outgoing
call records.
Note: To close the call history, press .
Notes:
1. If the system administrator sets the Call Forwarding Always option to a programmable
key, the programmable key indicator is always on and the calls are forwarded to the
destination number or voice mailbox.
2. If your phone is on hook while a call is on hold, you hear a reminder ring in 10 seconds
and at one-minute intervals.

Interacting with Calls
13
• To complete the transfer, hang up the headset or press the Release softkey.
• To cancel the transfer, press or press the key.
To Do a Consultative Transfer
1. While engaged in a call, press .
2. Dial the number to which you want to transfer the call.
3. Do either of the following:
• To complete the transfer, wait for an answer, consult, and hang up the handset or press the
Release softkey.
• To cancel the transfer, press or press the key.
Direct Transfer to Voice Mailbox
You can transfer an active call directly to the requested party's voice mailbox.
1. While engaged in a call, press .
2. Dial the destination voicemail number.
3. Do either of the following:
• To complete the transfer, hang up the handset or press the Release softkey.
• To cancel the transfer, press or press the key at any time before the last digit
in the destination number is dialed.
Call Forwarding
If you have the required permission (set by your system administrator), you can forward calls to an
extension or to a voice mailbox.
To forward an incoming call, perform the following:
1. To forward an incoming call, press the Forward softkey or the Call forward line key before
receiving the call.
2. Do either of the following:
• Press * or #. If a number is already programmed, press the programmed key to transfer the
call.
• Press the Forward softkey if the destination number or voice mailbox is already configured.
Notes:
1. If the system administrator sets the Call Forwarding Always option, the call forwarding
programmable key LED is always on and calls are forwarded to the destination number
or to the voice mailbox.
2. To disable the call forwarding always option, press the blinking call forwarding line key.

MiVoice 6910 IP Phone User Guide for MiVoice Business
14
Customizing Your Phone
You can customize specific settings on your phone by using the key (Settings hardkey).
Customizing the User Settings
You can change the language, audio, and display settings using the User Settings on your IP phone.
1. Press on the phone to access the Settings menu.
2. Navigate to User Settings menu and press .
3. Use to navigate through the sub options.
4. Press to select an option.
5. Use the navigation keys and dialpad keys for selecting each setting to make any changes
needed.
6. Do either of the following:
• Press to save your changes.
• Press at any time to exit without saving the changes.
The following phone settings can be configured through the User Settings menu:
Language Settings
Perform the following steps to set the language for your phone:
1. Press .
2. Use to navigate to User settings and press to select the option.
3. Navigate to Languages and press to select the option.
4. Use to navigate to the language you want to set.
5. Press or to Save the changes.
Option
Languages: Select the language
Audio: Ring Tone, Set Audio, and DHSG
Display: Contrast Level
Note: All Advanced Settings are administrator-level functions, and are not accessible by the
user. These settings must be set up and changed only by your system administrator.