Mocka Urban Three Drawer User manual

WARNING: Any furniture that is not anchored to a wall has the potential to tip over in
certain circumstances, i.e. if a child attempts to climb up on the furniture or in the event
of an earthquake. Accordingly, we recommend that all furniture is anchored to a wall.
We supply a free safety wall anchor with all furniture sold and we recommend these
are used to prevent your product tipping. The fixing device provided should fit most
wall types, but please note that different wall materials may require different fixing
devices from those supplied.
Phillips & Flathead screwdrivers required
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
A B1 B2 C1 C2 D
EFH I J
KL
G
M
Hardware Supplied
50mm
screw x8
30mm
screw x12
bolt &
nut x28
12mm
screw x48
18mm
screw x8
wedge
x8
feet
x4
25mm
screw x5
wall
anchor x2
cover
x6
wall
strap x2
14mm
screw x6
dowel
x8
50mm
screw x16
slide
rail x6
N O P
bracket
x6
12mm
screw x6
stopper
x6
E1
E2
E4
E3
Urban Three Drawer
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembl
y.

12
Attach 4x feet (H) to the end of the side leg panels. Attach the centre leg panels to the side panels using 12x 30mm screws
(B2). Tighten with a screwdriver.
H
B2
H
H
H
B2
B2
B2
B2
B2
B2
B2
Urban Three Drawer
2
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions

12
Attach 4x feet (H) to the end of the side leg panels. Attach the centre leg panels to the side panels using 12x 30mm screws
(B2). Tighten with a screwdriver.
H
B2
H
H
H
B2
B2
B2
B2
B2
B2
B2
34
Attach panel [2] to the leg panels using 8x 50mm screws (B1). Tighten
with a screwdriver.
Attach 6x brackets (N) to panels [3] and [4] using 24x 12mm screws
(C1). Tighten with a screwdriver. Slide 6x covers (M) over the brackets
as shown.
N
4
2
B1
B1
B1
B1
B1
B1
B1 B1
M
3
C1
C1
C1
C1
N
Urban Three Drawer
3
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions

56
Attach 3x slide rails (E1) to panel [3] using 6x 12mm screws (C1).
Attach 3x slide rails (E3) to panel [4] using 6x 12mm screws (C1).
Tighten with a screwdriver.
Attach panels [3] and [4] to panel [2] using 4x dowels (F) and 4x 50mm
screws (D). Tighten with a screwdriver.
4
3
2
4
3
F
D
E3
E1
F
D
F
D
F
D
E3
C1
E1 E3
C1
E1
Urban Three Drawer
Assembly Instructions
4
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

Jolt Wardrobe
5
mocka.co.nz | mocka.com.au
78
Slide panel [5] down along the grooves between panels [3] and [4] to
form the back of the unit. Attach metal support bar and secure with 4 x
screws (J). Tighten with a screwdriver.
Attach 4x bolts (A) to the underside of panel [1].
1
A
A
AA
Urban Three Drawer
Assembly Instructions
5
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

910
C1
D
D
E2
A
C1
C1
A
O
P
A
C1
E4
8
7
7
11
8
6
10
9
8
7
6
Attach panels [7], [8], [9] and [10] together using 2x bolts & locking nuts
(A) and 4x 50mm screws (D) as shown. Slide panel [11] between the side
panels. Attach 2x stoppers (P) to panel [6] using 2x 12mm screws (O)
and insert 6x bolts (A). Attach panel [6] to panels [7], [8] and [10] using 6x
locking nuts (A). Attach 1x slide rail (E2) to panel [7] and 1x slide rail (E4)
to panel [8] with 4x 12mm screws (C1). Tighten with a screwdriver.
Drawers x3
Attach panel [1] to panels [3] and [4] using 4x dowels (F) and 4x locking
nuts (A). Attach metal support bar to panel [1] and secure with 3 x
(I) screws. Tighten with a screwdriver.
A
O
P
A
A
A
AA
A
A
8
7
9
Urban Three Drawer
Assembly Instructions
6
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
1
34

11
12
Insert each drawer into the unit, ensuring they slide smoothly and easily
along the rails. If the drawer is not catching or sitting flush, twist the end
of the cover (M) until it catches on the stopper (P). To open and close
the drawers properly, please push both ends of thedrawer front at
the same time to engage both magnetic covers (M). Once assembled,
lift furniture into place, do not drag.
6
6
6
Attach 8x wedges (G) to panel [5] using 8x 18mm screws (C2). Tighten
with a screwdriver.
C2
G
5
G
G
G
G
G
G
G
G
M
Urban Three Drawer
Assembly Instructions
7
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

13 14
Ensure unit is balanced and steady before use. You’re done, enjoy!
1
K
L
Move the unit into the desired location up against a wall. Attach 2x wall
straps (L) to the back sides of panel [1] and secure with 2x 14mm screws
(J). Fasten to wall using 2x wall anchors (K) and 2x wall screws (I).
J
Safety Straps
J
I
J
Urban Three Drawer
Assembly Instructions
8
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558