Moxa Technologies ioLogik E2200 Series User manual

www.moxa.com
1
ioLogik E2200 Series
Smart Ethernet remote I/O with Click&GO Logic
Features and Benefits
•Front-end intelligence with patented Click&Go control logic, up to 4 rules
•Active communication with MX-AOPC UA Server
•Saves time and wiring costs with peer-to-peer communications
•Supports SNMP v1/v c/v3
•Friendly configuration via web browser
•Simplifies I/O management with MXIO library for Windows or Linux
•Wide operating temperature models available for -40 to 75°C (-40 to 167°F)
environments
Certifications
Introduction
Moxa’s ioLogik E 00 Series Ethernet Remote I/O is a PC-based data acquisition and control device that uses proactive, event-based reporting to
control I/O devices and features the Click&Go programming interface. Unlike traditional PLCs, which are passive and must poll for data, Moxa’s
ioLogik E 00 Series will, when paired with our MX-AOPC UA Server, communicate with SCADA systems using active messaging that is pushed to
the server only when state changes or configured events occur. Additionally, the ioLogik E 00 features SNMP for communications and control
using an NMS (Network Management System), allowing IT professionals to configure the device to push I/O status reports according to configured
specifications. This report-by-exception approach, which is new to PC-based monitoring, requires far less bandwidth than traditional polling
methods.
PC-Free Alarm and Control Intelligence
This device supports simple yet powerful Click&Go™ technology to
configure event-driven reports and alarms delivered over email, TCP/
UDP, or SNMP traps, giving you a powerful and effective tool for
delivering timestamped status updates in real time.
With built-in Click&Go™ intelligence, this device can be configured
for simple outputs paired up with simple input triggers without the
need for a PC controller. This allows it to be configured to
automatically report I/O events according to conditions specified by
the user.
SNMP for Ethernet evice Management
By using SNMP, IT engineers can configure the device to deliver alarms (traps) for specific I/O events, or use it to read or write directly to the I/O
registers. For the strongest security, the device features SNMPv3, with authentication and encryption. With Moxa’s SNMP-capable I/O, even IT
professionals can easily integrate industrial sensors and servos over an Ethernet backbone, and with its strong network management tools, it is
ideal for a wide variety of industrial applications, including environmental monitoring, telecommunications, power production and delivery, and
transportation.

www.moxa.com
Push Technology for Events and Alarms
When used with MX-AOPC UA Server, devices can use active push
communications when communicating changes in state and/or
events to a SCADA system. Unlike a polling system, when using a
push architecture for communications with a SCADA system,
messages will only be delivered when changes in state or configured
events occur, resulting in higher accuracy and lower amounts of data
that need to be transferred.
Specifications
Control Logic
Language Click&Go
Input/Output Interface
Digital Input Channels ioLogik E 10 Series: 1
ioLogik E 1 Series: 8
ioLogik E 14 Series: 6
Digital Output Channels ioLogik E 10/E 1 Series: 8
ioLogik E 60/E 6 Series: 4
Configurable DIO Channels (by software) ioLogik E 1 Series: 4
ioLogik E 4 Series: 1
Relay Channels ioLogik E 14 Series: 6
Analog Input Channels ioLogik E 40 Series: 8
ioLogik E 4 Series: 4
Analog Output Channels ioLogik E 40 Series:
RTD Channels ioLogik E 60 Series: 6
Thermocouple Channels ioLogik E 6 Series: 8
Buttons Reset button
Rotary Switch 0 to 9
Isolation 3k VDC or k Vrms
Digital Inputs
Connector Screw-fastened Euroblock terminal
Sensor Type ioLogik E 10 Series: Dry Contact and Wet Contact (NPN)
ioLogik E 1 /E 14/E 4 Series: Dry Contact and Wet Contact (NPN or PNP)
I/O Mode DI or event counter
Dry Contact On: short to GND
Off: open
Wet Contact (DI to GND) On: 0 to 3 VDC
Off: 10 to 30 VDC
Counter Frequency 900 Hz

www.moxa.com
3
Digital Filtering Time Interval Software configurable
Points per COM ioLogik E 10 Series: 1 channels
ioLogik E 1 /E 4 Series: 6 channels
ioLogik E 14 Series: 3 channels
Digital Outputs
Connector Screw-fastened Euroblock terminal
I/O Type Sink
I/O Mode DO or pulse output
Current Rating 00 mA per channel
Pulse Output Frequency 1 kHz
DIO Output Leakage Current 4.0 mA @ 4 VDC
Over-Current Protection 0.65 A per channel @ 5°C
Over-Temperature Shutdown 175°C (min.)
Over-Voltage Protection 45 VDC (typical)
Relays
Connector Screw-fastened Euroblock terminal
Type Form A (N.O.) power relay
I/O Mode Relay or pulse output
Pulse Output Frequency 0.3 Hz at rated load
Contact Current Rating Inductive load: A @ 30 VDC, 50 VAC, 110 VAC
Resistive load: 5 A @ 30 VDC, 50 VAC, 110 VAC
Minimum Permitted Load 1 A @ 5 VDC
Contact Resistance 100 milli-ohms (max.)
Electrical Endurance 100,000 operations @ 5 A resistive load
Mechanical Endurance 1,000,000 operations
Note Ambient humidity must be non-condensing and remain between 5 and 95%. The relays
may malfunction when operating in high condensation environments below 0°C.
Analog Inputs
Connector Screw-fastened Euroblock terminal
I/O Mode Voltage/Current
I/O Type Differential
Resolution 16 bits
Input Range ioLogik E 40 Series: ±150 mV, ±500 mV, ±5 V, ±10 V, 0 to 0 mA, 4 to 0 mA
ioLogik E 4 Series: ±150 mV, 0 to 150 mV, ±500 mV, 0 to 500 mV, ±5 V, 0 to 5 V, ±10 V,
0 to 10 V, 0 to 0 mA, 4 to 0 mA
Accuracy ioLogik E 40/E 4 :
±0.1% FSR @ 5°C
±0.3% FSR @ -10 to 60°C
ioLogik E 40-T/E 4 -T:

www.moxa.com
4
±0.1% FSR @ 5°C
±0.3% FSR @ -10 to 60°C
±0.5% FSR @ -40 to 75°C
Sampling Rate ioLogik E 40 Series:
All Channels: 10 samples/sec for voltage; 6 samples/sec for current
Per Channel: 1. 5 samples/sec for voltage; 0.75 samples/sec for current
Single channel: 1. 5 samples/sec for voltage; 0.75 samples/sec for current
ioLogik E 4 Series:
All channels: 3 samples/sec
Per channel: 8 samples/sec
Single channel: 100 samples/sec
Built-in Resistor for Current Input 1 0 ohms
Input Impedance ioLogik E 40 Series: 900 kilo-ohms (min.)
ioLogik E 4 Series: 00 kilo-ohms (min.)
Over-Voltage Protection - 5 to +30 VDC (power on)
-35 to +35 VDC (power off)
Analog Outputs
Connector Screw-fastened Euroblock terminal
I/O Mode Voltage/Current
Output Range 0 to 10 VDC
4 to 0 mA
Resolution 1 -bit
Accuracy ioLogik E 40:
±0.1% FSR @ 5°C
±0.3% FSR @ -10 to 60°C
ioLogik E 40-T:
±0.1% FSR @ 5°C
±0.3% FSR @ -10 to 60°C
±0.5% FSR @ -40 to 75°C
Load (Current Mode) Internal power: 50 ohms (max.)
RTDs
Connector Screw-fastened Euroblock terminal
Sensor Type JPT100, JPT 00, JPT500 (- 00 to 640°C)
JPT1000 (- 00 to 350°C)
NI100, NI 00, NI500 (-60 to 50°C)
NI1000 (-60 to 150°C)
NI1 0 (-80 to 60°C)
PT1000 (- 00 to 350°C)
PT50, PT100, PT 00, PT500 (- 00 to 850°C)
Resistance of 310, 6 0, 1 50, and 00 ohms
Input Connection - or 3-wire
Sampling Rate All channels: 1 samples/sec
Per channel: samples/sec
Resolution 0.1°C or 0.1 ohms

www.moxa.com
5
Accuracy ioLogik E 60:
±0.1% FSR @ 5°C
±0.3% FSR @ -10 to 60°C
ioLogik E 60-T:
±0.1% FSR @ 5°C
±0.3% FSR @ -10 to 60°C
±0.5% FSR @ -40 to 75°C
Input Impedance 6 5 kilo-ohms (min.)
Thermocouples
Connector Screw-fastened Euroblock terminal
Sensor Type J, K, T, E, R, S, B, N
Millivolt Type ±19.53 mV
±39.06 mV
±78.1 6 mV
Fault and over-voltage protection: -35 to +35 VDC (power off); - 5 to +30 VDC (power
on)
Resolution 16 bits
Millivolt Accuracy ioLogik E 6 :
±0.1% FSR @ 5°C
±0.3% FSR @ -10 to 60°C
ioLogik E 6 -T:
±0.1% FSR @ 5°C
±0.3% FSR @ -10 to 60°C
±0.5% FSR @ -40 to 75°C
TC Accuracy Types J, T, E, S, B: ±5°C
Types K, R, N: ±8°C
CJC Accuracy ±0.5°C @ 5°C
±1.5°C @ -40 to 75°C
Sampling Rate All channels: 1 samples/sec
Per channel: 1.5 samples/sec
Input Impedance 1 mega-ohms (min.)
LED Interface
LED Indicators PWR, RDY, Serial, I/O Status
Ethernet Interface
10/100BaseT(X) Ports (RJ45 connector) 1
Magnetic Isolation Protection 1.5 kV (built-in)
Ethernet Software Features
Configuration Options Windows Utility (ioAdmin), Web Console (HTTP)
Industrial Protocols Modbus TCP Server (Slave), SNMPv1/v c/v3, SNMPv1 Trap, Moxa AOPC (Active Tag),
MXIO Library, CGI commands
Management BOOTP, IPv4, SMTP, DHCP Client, HTTP, TCP/IP
MIB Device Settings MIB
Time Management SNTP

www.moxa.com
6
Modbus TCP
Functions Supported 1, , 3, 4, 5, 6, 15, 16
Mode Server (Slave)
Serial Interface
Connector Terminal block
Serial Standards RS-485
No. of Ports 1
Baudrate 1 00, 400, 4800, 9600, 19 00, 38400, 57600, 115 00 bps
Parity None
Data Bits 8
Stop Bits 1
Flow Control None
Serial Signals
RS-485- w Data+, Data-, GND
Serial Software Features
Industrial Protocols Modbus RTU Master
Platform
Real-time Clock (RTC) Real-time clock with battery backup
Power Parameters
Power Connector Screw-fastened Euroblock terminal
No. of Power Inputs 1
Input Voltage 1 to 36 VDC
Power Consumption ioLogik E 10 Series: 0 mA @ 4 VDC
ioLogik E 1 Series: 136 mA @ 4 VDC
ioLogik E 14 Series: 170 mA @ 4 VDC
ioLogik E 40 Series: 198 mA @ 4 VDC
ioLogik E 4 Series: 178 mA @ 4 VDC
ioLogik E 60 Series: 95 mA @ 4 VDC
ioLogik E 6 Series: 160 mA @ 4 VDC
Physical Characteristics
Dimensions 115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in)
Weight 50 g (0.55 lb)
Installation DIN-rail mounting, Wall mounting
Wiring I/O cable, 16 to 6 AWG
Power cable, 16 to 6 AWG
Housing Plastic
Environmental Limits
Operating Temperature Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included) -40 to 85°C (-40 to 185°F)

www.moxa.com
7
Ambient Relative Humidity 5 to 95% (non-condensing)
Altitude 000 m1
Standards and Certifications
Safety UL 508
EMC EN 61000-6- /-6-4
EMI CISPR 3 , FCC Part 15B Class A
EMS IEC 61000-4- ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 1 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
Shock IEC 60068- - 7
Vibration IEC 60068- -6
Freefall IEC 60068- -3
Declaration
Green Product RoHS, CRoHS, WEEE
MTBF
Time ioLogik E 10 Series: 13,673 hrs
ioLogik E 1 Series: 17,7 hrs
ioLogik E 14 Series: 307,3 9 hrs
ioLogik E 40 Series: 155,941 hrs
ioLogik E 4 Series: 04,391 hrs
ioLogik E 60 Series: 3 7, 8 hrs
ioLogik E 6 Series: 341,063 hrs
Standards Telcordia SR33
Warranty
Warranty Period ioLogik E 14 Series: years
ioLogik E 10/E 1 /E 40/E 4 /E 60/E 6 Series: 5 years
Details See www.moxa.com/warranty
Package Contents
Device 1 x ioLogik E 00 Series remote I/O
Documentation 1 x quick installation guide
1 x warranty card
1. Please contact Moxa if you require products guaranteed to function properly at higher altitudes.
. Because of the limited lifetime of power relays, products that use this component are covered by a -year warranty.

www.moxa.com
8
imensions
Ordering Information
Model Name Input/Output Interface Digital Input Sensor Type Analog Input Range Operating Temp.
ioLogik E 10 1 x DI, 8 x DO Wet Contact (NPN), Dry
Contact – -10 to 60°C
ioLogik E 10-T 1 x DI, 8 x DO Wet Contact (NPN), Dry
Contact – -40 to 75°C
ioLogik E 1 8 x DI, 4 x DIO, 8 x DO Wet Contact (NPN or PNP),
Dry Contact – -10 to 60°C
ioLogik E 1 -T 8 x DI, 4 x DIO, 8 x DO Wet Contact (NPN or PNP),
Dry Contact – -40 to 75°C
ioLogik E 14 6 x DI, 6 x Relay Wet Contact (NPN or PNP),
Dry Contact – -10 to 60°C
ioLogik E 14-T 6 x DI, 6 x Relay Wet Contact (NPN or PNP),
Dry Contact – -40 to 75°C
ioLogik E 40 8 x AI, x AO – ±150 mV, ±500 mV, ±5 V, ±10
V, 0- 0 mA, 4- 0 mA -10 to 60°C
ioLogik E 40-T 8 x AI, x AO – ±150 mV, ±500 mV, ±5 V, ±10
V, 0- 0 mA, 4- 0 mA -40 to 75°C
ioLogik E 4 1 x DIO, 4 x AI Wet Contact (NPN or PNP),
Dry Contact
±150 mV, 0-150 mV, ±500
mV, 0-500 mV, ±5 V, 0-5 V,
±10 V, 0-10 V, 0- 0 mA, 4- 0
mA
-10 to 60°C
ioLogik E 4 -T 1 x DIO, 4 x AI Wet Contact (NPN or PNP),
Dry Contact
±150 mV, 0-150 mV, ±500
mV, 0-500 mV, ±5 V, 0-5 V,
±10 V, 0-10 V, 0- 0 mA, 4- 0
mA
-40 to 75°C
ioLogik E 60 4 x DO, 6 x RTD – – -10 to 60°C
ioLogik E 60-T 4 x DO, 6 x RTD – – -40 to 75°C
ioLogik E 6 4 x DO, 8 x TC – – -10 to 60°C
ioLogik E 6 -T 4 x DO, 8 x TC – – -40 to 75°C
Accessories (sold separately)
Software
MX-AOPC UA Server OPC UA Server software for converting fieldbus to the OPC UA standard

www.moxa.com
9
© Moxa Inc. All rights reserved. Updated Jun 09, 0 1.
This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of
Moxa Inc. Product specifications subject to change without notice. Visit our website for the most up-to-date product information.