NAMCO PAC-MAN BASKET User manual

- 2 -
Table of Contents
Special note.............................................................................................................................3
Maintenance and Inspection....................................................................................................3
I.Inspection ..............................................................................................................................3
1.Parts list...........................................................................................................................4
2.Half-Assembly type parts list ...........................................................................................5
II.Machine view/size and power rating.....................................................................................6
III.Component description........................................................................................................6
IV.Assembly and disassembly..................................................................................................7
1. Assembly and disassembly for Disassembly type ..........................................................7
2. Assembly and disassembly for Half-Assembly type......................................................17
3.SET-UP Position & maintenance............................................................................24
V.Adjustment and Inspection .................................................................................................24
1.Link adjustment .............................................................................................................25
Cable link SET-UP.....................................................................................................25
Link main board adjustment......................................................................................26
2.Adjustment ....................................................................................................................27
SET-UP 1SET-UP the coin entry price for each game ...........................................27
SET-UP 2Additional tickets.....................................................................................28
SET-UP 3Multiple of tickets....................................................................................28
SET-UP 4Game Time SET-UP...............................................................................29
SET-UP 5Basket motor AUTO test.........................................................................30
SET-UP 6Ball holder motor AUTO test...................................................................30
SET-UP 7Reset the top score 250 or keep the record ...........................................30
SET-UP 8SET-UP DEMO musicON or OFF...................................................30
3.LED Monitor inspection .................................................................................................31
4.AUDIT............................................................................................................................31
5.Error code......................................................................................................................32
VI.How to play........................................................................................................................33
1.There are total 4 Stages................................................................................................33
2.2 play types available....................................................................................................33
VII.Screw and Nut list ............................................................................................................34
VIII. Wires Layout ..................................................................................................................36
IX.Expanded view..................................................................................................................38

- 3 -
Special note
We would like to thank you for choosing our Street basketball machine,
Please read this manual before using this product to insure the
security of the user.
This Manual contains the characteristics, special notes, and a
simple breakdown of the product.

Maintenance and Inspection
■Keep the machine clean by using mild types of cleaners.
■Clean the machine regularly to maintain its appearance.
■The appliance must not be cleaned by a water jet.
■Treat acrylic with care by using Windex
I.Inspection
Before product use, please confirm the product content first, if anything is
missing, please contact us right away.
NO Items Specification Total quantity
1 Chassis items Packing 1 unit
2 Basketball No.5 Basketball 10 unit
3 Key Maintenance door 1 pc
4 Key Cash box 1 pc
5 AC cable line 1 unit
6 Operation manual A4 1 set
Machine

position regulation
The power must be turned off before any movement.
The brake must be released, before moving the machine.
Do not put the machine under direct sunlight, it will damage the inside parts.

- 4 -
1.Parts list
1A Sensor for basket
(WO-RNPW2)1B Basket kits
2A Basket board 2BR Back right net
stander kit
2C 2 Front net
stander bridge(short)
2BL Back left net
stander kit
2E
2 Front net stander
bridge(long)
3A Front right net
stander kit
3B Front left net
stander kit
4A Base holder BF 4B Base holder FB 4C Base holder FF 4D Base holder BB
4E Base holder FF
(Bottom)
5A Wooden board
A type
5B Ball holder kit 5C Ball guide kits
6A Ball net holder kit 6B Main part
6C Block wooden board
for motor
6ERubber pad
Top cover Metal Shelf (optional)
Lower Side Net (Frame
Included)×4
Basketball

- 5 -
2.Half-Assembly type parts list
4B Base holder FB
4C Base holder FF
Top cover
Main frame
5B Ball holder kit
5C Ball guide kits 6A Ball net holder kit 6B Main part
6C Block wooden board
for motor
Basketball
Metal Shelf (optional)
Lower Side Net(Frame Included)×4

- 6 -
II.Machine view/size and power rating
Machine DimensionsW1030×D2500×Top cover H2643mm
Weight260 kg / 558.4 lbs (Accessories not Included )
Top cover 6.6kgMetal Shelf 3.4kgLower Side Net 4.2kg×4
VoltageAC110V~120V/AC220V~240V(50/60Hz) Use Electrical
plug display as a guide Located behind the machine.
Power Consumption200W
Fuse3A
Token sizeØ22mm~27mm
III.Component description
Position direction




Front



Base





Top






Back



Side




Top cover(optional)
Running display board
2 Digital display board LED
3 Digital display board LED
Coin LED display
Ticket dispenser
Coin selector
Ticket
container
(inside)
Cash
box(inside)
Speaker
Basket
b
oard
Basket
kit
Metal Shelf
(op
tional)
IC Board
Power
TestAudit
Fuse
Ball
holder kit
Board cover
Basket
cover
Box cover
AC Cable line
Electrical plug display
I/O control Board
Main part
Left
Back
Front
Lower Side Net (Frame Included)×4
Right

- 7 -
IV.Assembly and disassembly
1. Assembly and disassembly for Disassembly type
Step 1


1.ScrewLower Side Net (optional)on the basket board front.
Assembly parts
2BR Back right net stander kit
2BL Back left net stander kit
3A Front right net stander kit
3B Front left net stander kit
Lower Side Net(Frame Included)
P.35 NO.32
screw(M4×10)×10
P.35 NO.32
screw(M4×10)×10

- 8 -
Step 2


1.Screw1B Basket kitson the basket board front.
P.34 NO.13 screw(M5×15)×6
P.35 NO.21 nut(M5)×4
Assembly parts
1A Sensor for basket
1B Basket kits
2A Basket board

- 9 -
Step 3


1. Screw2BR2BL Back left & right net stander kitson basket board left and right.
2. Screw2C Front net stander bridge(short)on Back left & Right net stander kits.
Assembly parts
2A Basket board
2BR Back right net stander kit
2BL Back left net stander kit
2C Front net stander
bridge(short)
P.34 NO.10 screw (M6×48)×2
P.35 NO.20 nut (M6)×2
Insert position
P.35 NO.33 screw (M8×70)×4
P.35 NO.19 nut (M8)×4

- 10 -
Step 4


Assemble3A3B Front right & left net stander kiton basket board left and right,
connect with screw & fixed it as drawing.
Assembly parts
3A Front right net stander kit
3B Front left net stander kit
Insert
position
P.35 NO.33 screw (M8×70)×4
P.35 NO.19 nut (M8)×4

- 11 -


Step 5


Screw theBFFBFF Base holders & Front net stander bridge(short)step by
step as drawing.
Assembly parts
2C Front net stander
bridge(short)
2E 2 Front net stander
bridge(long)
4A Base holder BF
4B Base holder FB
4C Base holder FF
4D Base holder BB
4E Base holder FF
(Bottom)
Front net stander bridge(short)
BF
FB
FF
P.34 NO.11 screw (M6×26)×2
P.35 NO.20 nut (M6)×2
P.34 NO.10
screw (M6×48)×6
P.35 NO.20
nut (M6)×6
Base holder BB
P.34 NO.10
screw (M6×48) ×9
P.35 NO.20 nut (M6)×9
P.35 NO.30
washer(M6.5×13.5)×9

- 12 -


 Step 6


Screw the5A Wooden base A type5B Ball holder kit5C Ball guide kitsstep by step
as drawing.
Wooden base A type
Ball holder kit
Ball guide kits
P.34 NO.11 screw (M6×26)×12
P.35 NO.20 nut (M6)×12
P.35 NO.30 washer(M6.5×13.5) ×12
P.34 NO.10 screw (M6×26) ×6
P.35 NO.20nut(M6) ×6
P.35 NO.30washer(M6.5×13.5) ×6
6ERubber pad
Assembly parts
5A Wooden board A type
5B Ball holder kit
5C Ball guide kits
6E  Rubber pad
6ERubber pad

- 13 -
Step 7


1. Screw6A Ball net holder kit.
2. Screw6B Main partMetal Shelf (optional).
Assembly parts



6A Ball net holder kit
6B Main part
Metal Shelf (optional)
Ball net holder kit
Metal Shelf (optional)
Main part
P.34 NO.04
screw (M8×88)×4
P.35 NO.19 nut(M8)×4
P.35 NO.27
sleeve(  15×43)×4
P.34 NO.08 screw (M8×16)×4
P.35 NO.19 nut (M8)×4
P.35 NO.30 washer(M10×20)×4
P.35 NO.31
Hexagonal Phillips screw with 2
Washers included 2 on each side

- 14 -
Step 8


1.Fix the 3 main cords as the following drawing.
2.Run the IC board plug and the ball holder kit plug located underneath the front
of the ball net holder, through the hole in back of the main part.
3.Now connect plugs as shown in drawing.
Ball holder kit
Ball holder kit plug
IC board plug
Power plug
Main cords
Open main box
base cover

- 15 -
Step 9


ScrewTop cover(optional)step by step as drawing.
Step 10


1.connect the I/O control board with Top cover.
2.Now connect plugs as shown in drawing.
Assembly parts
Top cover(optional)
Top cover(optional)
I/O control Board
Top cover
Insert position
P.35 NO.28 screw (M5×38)×4
P.35 NO.29 Nut(M5)×4

- 16 -
Step 11


Use screws to fix it then complete the assembly street basketball.
Assembly parts
6C Block wooden board
for motor
Block wooden board for motor
P.35 NO.20 nut(M6)×4

- 17 -
2. Assembly and disassembly for Half-Assembly type
Step 1


Turn the left and right frame180°to the position as drawing picture . connect with
screw & fixed it as drawing.
P.35 NO.33
screw (M8×70)×4
P.35 NO.19 nut (M8)×4

- 18 -
Step 2


Screw the base frame FB and base frame FF as drawing picture.
Assembly parts
4B Base holder FB
4C Base holder FF
FB
FF
P.34 NO.11 screw (M6×26)×2
P.35 NO.20 nut (M6)×2
P.34 NO.10 screw (M6×48)×4
P.35 NO.20 nut (M6)×4

- 19 -
Step 3


Screw the 5B Ball holder kit and 5C Ball guide kits as drawing picture.
Assembly parts
5B Ball holder kit
5C Ball guide kits
Ball holder kit
Ball guide kits
P.34 NO.11 screw (M6×26)×12
P.35 NO.20 nut (M6)×12
P.35 NO.30 washer(M6×26)×12

- 20 -
Step 4


1. Screw6A Ball net holder kit.
2. Screw6B Main partMetal Shelf (optional).
Assembly parts



6A Ball net holder kit
6B Main part
Metal Shelf (optional)
P.34 NO.04
screw (M8×88)×4
P.35 NO.19 nut(M8)×4
P.35 NO.27
sleeve(  15×43)×4
P.34 NO.08 screw (M8×16)×4
P.35 NO.19 nut (M8)×4
P.35 NO.30 washer(M10×20)×4
Ball net holder kit
Metal Shelf (optional)
Main part
P.35 NO.31
Hexagonal Phillips screw with 2
Washers included 2 on each side