Neousys Technology Nuvo-8000 Series User manual

Neousys Technology Inc.
Nuvo-8000
User Manual
Revision 1.0

Table of Contents
Table of Contents
Table of Contents...................................................................................................................2
Legal Information...................................................................................................................4
Contact Information...............................................................................................................5
Declaration of Conformity.....................................................................................................5
Copyright Notice....................................................................................................................6
Safety Precautions.................................................................................................................7
Service and Maintenance ......................................................................................................8
ESD Precautions....................................................................................................................8
About This Manual.................................................................................................................9
1Introduction
1.1 Product Specifications.............................................................................................11
1.1.1 Nuvo-8003 Specifications.................................................................................11
1.1.2 Nuvo-8023 Specifications.................................................................................13
1.1.3 Nuvo-8032 Specifications.................................................................................15
1.1.4 Nuvo-8041 Specifications.................................................................................17
1.2 Nuvo-8003 Dimensions............................................................................................19
1.2.1 Nuvo-8003 I/O Panel View................................................................................19
1.2.2 Nuvo-8003 Side View .......................................................................................20
1.2.3 Nuvo-8003 Bottom View...................................................................................20
1.3 Nuvo-8023/ 8032/ 8041 Dimension..........................................................................21
1.3.1 Nuvo-8023/ 8032/ 8041 I/O Panel View............................................................21
1.3.2 Nuvo-8023/ 8032/ 8041 Side View....................................................................22
1.3.3 Nuvo-8023/ 8032/ 8041 Bottom View ...............................................................22
2Overview
2.1 Nuvo-8000 Packing List...........................................................................................23
2.2 Nuvo-8000 Series I/O Panel.....................................................................................24
2.2.1 Power Button ....................................................................................................26
2.2.2 3.5mm Speaker/ Headphone Output Jack........................................................27
2.2.3 LED Indicators ..................................................................................................28
2.2.4 USB3.1 Gen 1 Port...........................................................................................29
2.2.5 I210 Gigabit Ethernet Port ................................................................................30
2.2.6 DVI Port............................................................................................................31
2.2.7 Reset Button.....................................................................................................32
2.2.8 USB3.1 Gen 1 Port...........................................................................................33
2.2.9 I219 Gigabit Ethernet Port ................................................................................34
2.2.10 COM2 Port........................................................................................................35
2.2.11 COM1 Port........................................................................................................36
2.2.12 3-Pin Terminal Block for DC Input.....................................................................37
2.2.13 COM3/ 4/ 5 Port................................................................................................38
2.3 Internal I/O Functions...............................................................................................39
2.3.1 SODIMM DRAM Slot ........................................................................................39
2.3.2 mSATA Slot & Pin Definition..............................................................................40
2.3.3 SATA Ports........................................................................................................42
2.3.4 On/ Off Ctrl & Status Output..............................................................................43
2.3.5 Internal USB 2.0 Port........................................................................................45
3System Installation
3.1 Disassembling the System......................................................................................47
3.2 Installing Internal Components...............................................................................50
3.2.1 CPU Installation Procedure...............................................................................50
3.2.2 DDR4 SO-DIMM Installation.............................................................................59
3.2.3 mSATA, Mini-SIM (2FF) Card and Antennae Installation ..................................61
3.2.4 HDD/ SSD Installation.......................................................................................63

Table of Contents
3
3.3 Installing the System Enclosure .............................................................................65
3.4 Wall-mount Bracket Installation..............................................................................67
3.5 DIN-rail Installation (Optional).................................................................................68
3.6 Powering On the System .........................................................................................70
3.6.1 Powering On Using the Power Button...............................................................70
3.6.2 Powering On Using Wake-on-LAN....................................................................71
3.6.3 Configure your Windows system.......................................................................73
4System Configuration
4.1 BIOS Settings ...........................................................................................................74
4.1.1 COM Port Configuration....................................................................................75
4.1.2 COM Port High Speed Mode............................................................................76
4.1.3 Delay for PEG Initialization...............................................................................77
4.1.4 SATA and mSATA Configuration .......................................................................78
4.1.5 Fan Control Configuration.................................................................................79
4.1.6 Power On After Power Failure Option...............................................................84
4.1.7 Power & Performance (CPU SKU Power Configuration)..................................85
4.1.8 Wake on LAN Option ........................................................................................86
4.1.9 Boot Menu ........................................................................................................87
4.1.10 Boot Type (Legacy/ UEFI).................................................................................89
4.1.11 Position New Boot Device.................................................................................90
4.1.12 Watchdog Timer for Booting..............................................................................91
4.1.13 Legacy/ UEFI Boot Device................................................................................92
4.2 AMT Configuration...................................................................................................93
5OS Support and Driver Installation
5.1 Operating System Compatibility.............................................................................95
5.2 Driver Installation.....................................................................................................96
5.2.1 Install Drivers Automatically..............................................................................96
5.2.2 Install Drivers Manually.....................................................................................97
5.3 Driver Installation for Watchdog Timer Control.....................................................98
Appendix A Using WDT & DIO
WDT and DIO Library Installation.....................................................................................100
WDT Functions...................................................................................................................102
InitWDT................................................................................................................................102
SetWDT ...............................................................................................................................102
StartWDT.............................................................................................................................103
ResetWDT ...........................................................................................................................103
StopWDT .............................................................................................................................103

Legal Information
Legal Information
All Neousys Technology Inc. products shall be subject to the latest Standard
Warranty Policy
Neousys Technology Inc. may modify, update or upgrade the software, firmware or
any accompanying user documentation without any prior notice. Neousys
Technology Inc. will provide access to these new software, firmware or
documentation releases from download sections of our website or through our
service partners.
Before installing any software, applications or components provided by a third party,
customer should ensure that they are compatible and interoperable with Neousys
Technology Inc. product by checking in advance with Neousys Technology Inc..
Customer is solely responsible for ensuring the compatibility and interoperability of
the third party’s products. Customer is further solely responsible for ensuring its
systems, software, and data are adequately backed up as a precaution against
possible failures, alternation, or loss.
For questions in regards to hardware/ software compatibility, customers should
contact Neousys Technology Inc. sales representative or technical support.
To the extent permitted by applicable laws, Neousys Technology Inc. shall NOT be
responsible for any interoperability or compatibility issues that may arise when (1)
products, software, or options not certified and supported; (2) configurations not
certified and supported are used; (3) parts intended for one system is installed in
another system of different make or model.

Contact Information/ Declaration of Conformity
Contact Information
Headquarters
(Taipei, Taiwan)
Neousys Technology Inc.
15F, No.868-3, Zhongzheng Rd., Zhonghe Dist., New Taipei City, 23586, Taiwan
Tel: [phone] Fax: [phone] Email, Website
Americas
(Illinois, USA)
Neousys Technology America Inc.
3384 CommercialAvenue, Northbrook, IL 60062, USA
Tel: [phone]Email, Website
China Neousys Technology (China) Ltd.
Room 612, Building 32, Guiping Road 680, Shanghai
Tel: [phone]Email, Website
Declaration of Conformity
FCC This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at own expense.
CE The product(s) described in this manual complies with all applicable European
Union (CE) directives if it has a CE marking. For computer systems to remain
CE compliant, only CE-
compliant parts may be used. Maintaining CE
compliance also requires proper cable and cabling techniques.

Copyright Notice
Copyright Notice
All rights reserved. This publication may not be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any language or
computer language, in any form or by any means, electronic, mechanical,
magnetic, optical, chemical, manual or otherwise, without the prior written
consent of Neousys Technology, Inc.
Disclaimer This manual is intended to be used as an informative guide only and is subject
to change without prior notice. It does not represent commitment from Neousys
Technology Inc. Neousys Technology Inc. shall not be liable for any direct,
indirect, special, incidental, or consequential damages arising from the use of
the product or documentation, nor for any infringement on third party rights.
Patents and
Trademarks
Neousys, the Neousys logo, Expansion Cassette, MezIOTM are registered
patents and trademarks of Neousys Technology, Inc.
Windows is a registered trademark of Microsoft Corporation.
Intel®, Core™ are registered trademarks of Intel Corporation
NVIDIA®is a registered trademark of NVIDIA Corporation
All other names, brands, products or services are trademarks or registered
trademarks of their respective owners.

Safety Precautions
Safety Precautions
Read these instructions carefully before you install, operate, or transport the
system.
Install the system or DIN rail associated with, at a sturdy location
Install the power socket outlet near the system where it is easily accessible
Secure each system module(s) using its retaining screws
Place power cords and other connection cables away from foot traffic. Do not
place items over power cords and make sure they do not rest against data
cables
Shutdown, disconnect all cables from the system and ground yourself before
touching internal modules
Ensure that the correct power range is being used before powering the device
Should a module fail, arrange for a replacement as soon as possible to
minimize down-time
If the system is not going to be used for a long time, disconnect it from mains
(power socket) to avoid transient over-voltage

Service and Maintenance/ ESD Precautions
Service and Maintenance
ONLY qualified personnel should service the system
Shutdown the system, disconnect the power cord and all other connections
before servicing the system
When replacing/ installing additional components (expansion card, memory
module, etc.), insert them as gently as possible while assuring proper
connector engagement
ESD Precautions
Handle add-on module, motherboard by their retention screws or the module’s
frame/ heat sink. Avoid touching the PCB circuit board or add-on module
connector pins
Use a grounded wrist strap and an anti-static work pad to discharge static
electricity when installing or maintaining the system
Avoid dust, debris, carpets, plastic, vinyl and styrofoam in your work area.
Do not remove any module or component from its anti-static bag before
installation

About This Manual
About This Manual
This manual introduces Neousys Nuvo-8000 Series featuring Intel®9th/ 8th Gen
Core™ i hexa/ octa core 35W LGA1151 processors with up to 5 slot expandability.
The system is capable of supporting one 125W NVIDIA®graphics card for modern AI
applications.
The guide also demonstrates the system’s installation procedures.
Revision History
Version Date Description
1.0 Feb. 2021 Initial release

Nuvo-8000 Series
10
1 Introduction
Nuvo-8000 series systems are cost-effective box-PCs with up to 5 expansion slots that
can perfectly replace your bulky rack-mount or wall-mount IPC systems. Leveraging
Intel® 9th/ 8th-Gen Core™ i desktop processor with H310 chipset, it delivers the same
computing power as traditional IPCs but in amuch more compact footprint with a
budgetary price.
There are four models in the Nuvo-8000 series with various expansion configurations.
Customers can choose from a compact 3-slot PCIe system to a 5-slot system with up
to three PCIe slots or up to four PCI slots, that best suit their industrial automation or
machine vision application needs. It features front-accessible I/Os including two GbE,
four USB 3.1 Gen1 and five COM ports that make it easier to access when it is
rack-mounted or placed inside a cabinet. Storage wise, Nuvo-8000 series systems
have two 2.5”SATA SSD/ HDD and one mSATA socket to support various storage
devices. The system can also support a 125W NVIDIA® GPU to offer TFLOPS
computing power for modern deep-learning applications.
Nuvo-8000 series systems are designed with satisfying industrial demands in mind.
Retaining traditional IPC expansion capabilities and fulfilling diverse application
requirements in an extremely compact form-factor with industrial-grade reliability.

Nuvo-8000 Series
11
1.1 Product Specifications
1.1.1 Nuvo-8003 Specifications
System Core
Processor
Supporting Intel® 9th/ 8th-Gen Core™CPU (LGA1151 socket)
- Intel® Core™i7-8700*/ i7-8700T/ i7-9700TE
- Intel® Core™i5-8500*/ i5-8500T/ i5-9500TE
- Intel® Core™i3-8100*/ i3-8100T/ i3-9100TE
- Intel® Pentium® G5400T (4M Cache, 3.1GHz, 35W TDP)
- Intel® Celeron® G4900T (2M Cache, 2.9GhHz, 35W TDP)
Chipset Intel® H310 platform controller hub
Graphics Integrated Intel® UHD Graphics 630,
or independent 120W GPU via x16 PEG port
Memory Up to 32 GB DDR4 2666 SDRAM (one SODIMM slot)
I/O Interface
Ethernet 1x Gigabit Ethernet port by Intel® I219-LM
1x Gigabit Ethernet port by Intel® I210-IT
Native Video 2x DVI-D connector, supporting 1920 x 1200 resolution
Serial Port
1x software-programmable RS-232/ 422/ 485 ports (COM1)
1x software-programmable RS-422/ 485 ports (COM2)
3x 3-wire RS-232 ports (COM3/ COM4/ COM5)
USB 4x USB 3.1 Gen1 (5 Gbps) ports
2x USB 2.0 ports (internal for dongle use)
Audio 1x 3.5mm jack for mic-in and speaker-out
Storage Interface
SATA 2x internal SATAports for 2.5”HDD/ SSD installation
mSATA 2x full-size mSATA port
Expansion Bus
PCI Express 1x PCIe x16 slot@Gen3, 16-lanes
1x PCIe x8 slot@Gen2, 4-lanes
1x PCIe x4 slot@Gen2, 1-lanes
PCI N/A
mSATA 1x full-size mSATA socket (mux with USB 2.0 signals)
Power Supply
DC Input 1x 3-pin pluggable terminal block for 8-35V DC input
Max. power 68.2W @ 24V (i7-9700TE @ 35W TDP)

Nuvo-8000 Series
12
consumption
Mechanical
Dimension 154 mm (W) x 236 mm (D) x 174 mm (H)
Weight 3 Kg
Mounting Wall-mounting(Standard)
DIN-Rail(optional)
Rack-mount (optional)
Environmental
Operating
temperature -25°C ~ 60°C
Storage
temperature -40°C ~85°C
Humidity 10%~90% , non-condensing
Vibration Operating, MIL-STD-810G, Method 514.6, Category 4
Shock Operating, MIL-STD-810G, Method 516.6, Procedure I, functional
shock=20g
EMC CE/ FCC Class A, according to EN 55024 & EN 55032

Nuvo-8000 Series
13
1.1.2 Nuvo-8023 Specifications
System Core
Processor
Supporting Intel® 9th/ 8th-Gen Core™CPU (LGA1151 socket)
- Intel® Core™i7-8700*/ i7-8700T/ i7-9700TE
- Intel® Core™i5-8500*/ i5-8500T/ i5-9500TE
- Intel® Core™i3-8100*/ i3-8100T/ i3-9100TE
- Intel® Pentium® G5400T (4M Cache, 3.1GHz, 35W TDP)
- Intel® Celeron® G4900T (2M Cache, 2.9GhHz, 35W TDP)
Chipset Intel® H310 platform controller hub
Graphics Integrated Intel® UHD Graphics 630,
or independent 120W GPU via x16 PEG port
Memory Up to 32 GB DDR4 2666 SDRAM (one SODIMM slot)
I/O Interface
Ethernet 1x Gigabit Ethernet port by Intel® I219-LM
1x Gigabit Ethernet port by Intel® I210-IT
Native Video 2x DVI-D connector, supporting 1920 x 1200 resolution
Serial Port
1x software-programmable RS-232/ 422/ 485 ports (COM1)
1x software-programmable RS-422/ 485 ports (COM2)
3x 3-wire RS-232 ports (COM3/ COM4/ COM5)
USB 4x USB 3.1 Gen1 (5 Gbps) ports
2x USB 2.0 ports (internal for dongle use)
Audio 1x 3.5mm jack for mic-in and speaker-out
Storage Interface
SATA 2x internal SATAports for 2.5”HDD/ SSD installation
mSATA 2x full-size mSATA port
Expansion Bus
PCI Express 1x PCIe x16 slot@Gen3, 8-lanes
1x PCIe x4 slots@Gen2, 2-lanes
1x PCIe x4 slots@Gen2, 1-lanes
PCI 2x 33MHz/ 32-bit 5V PCI slots
mSATA 1x full-size mSATA socket (mux with USB 2.0 signals)
Power Supply
DC Input 1x 3-pin pluggable terminal block for 8-35V DC input
Max. power
consumption 70.8W @ 24V (i7-9700TE @ 35W)
Mechanical

Nuvo-8000 Series
14
Dimension 185 mm (W) x 236 mm (D) x 174 mm (H)
Weight 3.6 Kg
Mounting Wall-mounting(Standard)
DIN-Rail(optional)
Rack-mount (optional)
Environmental
Operating
temperature -25°C ~ 60°C
Storage
temperature -40°C ~85°C
Humidity 10%~90% , non-condensing
Vibration Operating, MIL-STD-810G, Method 514.6, Category 4
Shock Operating, MIL-STD-810G, Method 516.6, Procedure I, functional
shock=20g
EMC CE/ FCC Class A, according to EN 55024 & EN 55032

Nuvo-8000 Series
15
1.1.3 Nuvo-8032 Specifications
System Core
Processor
Supporting Intel® 9th/ 8th-Gen Core™CPU (LGA1151 socket)
- Intel® Core™i7-8700*/ i7-8700T/ i7-9700TE
- Intel® Core™i5-8500*/ i5-8500T/ i5-9500TE
- Intel® Core™i3-8100*/ i3-8100T/ i3-9100TE
- Intel® Pentium® G5400T (4M Cache, 3.1GHz, 35W TDP)
- Intel® Celeron® G4900T (2M Cache, 2.9GhHz, 35W TDP)
Chipset Intel® H310 platform controller hub
Graphics Integrated Intel® UHD Graphics 630,
or independent 120W GPU via x16 PEG port
Memory Up to 32 GB DDR4 2666 SDRAM (one SODIMM slot)
I/O Interface
Ethernet 1x Gigabit Ethernet port by Intel® I219-LM
1x Gigabit Ethernet port by Intel® I210-IT
Native Video 2x DVI-D connector, supporting 1920 x 1200 resolution
Serial Port
1x software-programmable RS-232/ 422/ 485 ports (COM1)
1x software-programmable RS-422/ 485 ports (COM2)
3x 3-wire RS-232 ports (COM3/ COM4/ COM5)
USB 4x USB 3.1 Gen1 (5 Gbps) ports
2x USB 2.0 ports (internal for dongle use)
Audio 1x 3.5mm jack for mic-in and speaker-out
Storage Interface
SATA 2x internal SATAports for 2.5”HDD/ SSD installation
mSATA 2x full-size mSATA port
Expansion Bus
PCI Express 1x PCIe x16 slot@Gen3, 8-lanes
1x PCIe x8 slots@Gen2, 4-lanes
PCI 3x 33MHz/ 32-bit 5V PCI slots
mSATA 1x full-size mSATA socket (mux with USB 2.0 signals)
Power Supply
DC Input 1x 3-pin pluggable terminal block for 8-35V DC input
Max. power
consumption 70.8W @ 24V (i7-9700TE @ 35W)
Mechanical
Dimension 185 mm (W) x 236 mm (D) x 174 mm (H)

Nuvo-8000 Series
16
Weight 3.6 Kg
Mounting Wall-mounting(Standard)
DIN-Rail(optional)
Rack-mount (optional)
Environmental
Operating
temperature -25°C ~ 60°C
Storage
temperature -40°C ~85°C
Humidity 10%~90% , non-condensing
Vibration Operating, MIL-STD-810G, Method 514.6, Category 4
Shock Operating, MIL-STD-810G, Method 516.6, Procedure I, functional
shock=20g
EMC CE/ FCC Class A, according to EN 55024 & EN 55032

Nuvo-8000 Series
17
1.1.4 Nuvo-8041 Specifications
System Core
Processor
Supporting Intel® 9th/ 8th-Gen Core™CPU (LGA1151 socket)
- Intel® Core™i7-8700*/ i7-8700T/ i7-9700TE
- Intel® Core™i5-8500*/ i5-8500T/ i5-9500TE
- Intel® Core™i3-8100*/ i3-8100T/ i3-9100TE
- Intel® Pentium® G5400T (4M Cache, 3.1GHz, 35W TDP)
- Intel® Celeron® G4900T (2M Cache, 2.9GhHz, 35W TDP)
Chipset Intel® H310 platform controller hub
Graphics Integrated Intel® UHD Graphics 630,
or independent 120W GPU via x16 PEG port
Memory Up to 32 GB DDR4 2666 SDRAM (one SODIMM slot)
I/O Interface
Ethernet 1x Gigabit Ethernet port by Intel® I219-LM
1x Gigabit Ethernet port by Intel® I210-IT
Native Video 2x DVI-D connector, supporting 1920 x 1200 resolution
Serial Port
1x software-programmable RS-232/ 422/ 485 ports (COM1)
1x software-programmable RS-422/ 485 ports (COM2)
3x 3-wire RS-232 ports (COM3/ COM4/ COM5)
USB 4x USB 3.1 Gen1 (5 Gbps) ports
2x USB 2.0 ports (internal for dongle use)
Audio 1x 3.5mm jack for mic-in and speaker-out
Storage Interface
SATA 2x internal SATAports for 2.5”HDD/ SSD installation
mSATA 2x full-size mSATA port
Expansion Bus
PCI Express 1x PCIe x16 slot@Gen3, 8-lanes
PCI 4x 33MHz/ 32-bit 5V PCI slots
mSATA 1x full-size mSATA socket (mux with USB 2.0 signals)
Power Supply
DC Input 1x 3-pin pluggable terminal block for 8-35V DC input
Max. power
consumption 70.8W @ 24V (i7-9700TE @ 35W)
Mechanical
Dimension 185 mm (W) x 236 mm (D) x 174 mm (H)
Weight 3.6 Kg

Nuvo-8000 Series
18
Mounting Wall-mounting(Standard)
DIN-Rail(optional)
Rack-mount (optional)
Environmental
Operating
temperature -25°C ~ 60°C
Storage
temperature -40°C ~85°C
Humidity 10%~90% , non-condensing
Vibration Operating, MIL-STD-810G, Method 514.6, Category 4
Shock Operating, MIL-STD-810G, Method 516.6, Procedure I, functional
shock=20g
EMC CE/ FCC Class A, according to EN 55024 & EN 55032

Nuvo-8000 Series
19
1.2 Nuvo-8003 Dimensions
NOTE
All measurements are in millimeters (mm).
1.2.1 Nuvo-8003 I/O Panel View

Nuvo-8000 Series
20
1.2.2 Nuvo-8003 Side View
1.2.3 Nuvo-8003 Bottom View