Neousys Technology Nuvo-10208GC Series User manual

Neousys Technology Inc.
Nuvo-10208GC Series
User Manual
Revision 1.0

Table of Contents
Table of Contents
Table of Contents...................................................................................................................2
Legal Information...................................................................................................................4
Contact Information...............................................................................................................5
Declaration of Conformity.....................................................................................................5
Copyright Notice....................................................................................................................6
Safety Precautions.................................................................................................................7
Battery Warning......................................................................................................................7
Service and Maintenance ......................................................................................................8
ESD Precautions....................................................................................................................8
Restricted Access Location ..................................................................................................8
About This Manual.................................................................................................................9
1Introduction
1.1 Product Specifications............................................................................................. 11
1.1.1 Nuvo-10208GC Specifications..........................................................................11
1.2 Nuvo-10208GC Dimension.......................................................................................13
1.2.1 Nuvo-10208GC I/O Panel View ........................................................................13
1.2.2 Nuvo-10208GC Ignition/ 4/3-Pin Terminal Block Panel View............................14
1.2.3 Nuvo-10208GC Top Panel View .......................................................................15
1.2.4 Nuvo-10208GC Hot-swap Panel View..............................................................16
1.2.5 Nuvo-10208GC Bottom View............................................................................16
1.2.6 Nuvo-10208GC Wall-mount Dimension............................................................17
2System Overview
2.1 Nuvo-10208GC Packing List....................................................................................18
2.2 External I/O Panel.....................................................................................................19
2.2.1 Power Button ....................................................................................................21
2.2.2 4-pole 3.5mm Speaker-out/ Microphone-in Jack...............................................22
2.2.3 Reset Button.....................................................................................................23
2.2.4 VGA Port...........................................................................................................24
2.2.5 DisplayPort........................................................................................................25
2.2.6 LED Indicators ..................................................................................................26
2.2.7 10Gb Ethernet Port (Optional) ..........................................................................27
2.2.8 CMOS Reset Button .........................................................................................28
2.2.9 USB3.2 Gen2x1 Port ........................................................................................29
2.2.10 2.5Gb Ethernet Port..........................................................................................30
2.2.11 Gigabit Ethernet................................................................................................31
2.2.12 COM Port..........................................................................................................32
2.3 Terminal Block with Ignition Control ......................................................................33
2.4 Ignition Control Switch............................................................................................34
2.5 Internal I/O Functions...............................................................................................35
2.5.1 SODIMM DRAM Slot ........................................................................................35
2.5.2 mini-PCIe Socket & Pin Definition.....................................................................36
2.5.3 M.2 2242/ 3042/ 3052 (B Key), Mini-SIM Card Slot & Pin Definition.................38
2.5.4 SATA Ports........................................................................................................40
2.5.5 Status LED Output & Remote On/ Off Control and Pin Definition.....................41
2.5.6 Internal USB Port on Extension Board..............................................................42
2.5.7 M.2 2280 (M Key) Slot for NVMe SSD..............................................................43
3System Installation
3.1 Disassembling the System......................................................................................46
3.2 Installing Internal Components...............................................................................53
3.2.1 CPU Installation for Barebone System..............................................................53
3.2.2 Remove and Replace the Existing CPU ...........................................................58
3.2.3 DDR5 SO-DIMM Installation.............................................................................65

Table of Contents
3
3.2.4 mPCIe Module, Mini-SIM (2FF) Card and Antennae Installation.......................67
3.2.5 M.2 2242 (B Key) Module and Micro-SIM (3FF) Card Installation.....................69
3.2.6 M.2 (M Key) 2280 NVMe SSD..........................................................................72
3.2.7 Graphics Card Installation.................................................................................74
3.2.8 HDD/ SSD Installation.......................................................................................82
3.2.9 Easy-swap M.2 NVMe SSD Installation (Optional) ...........................................84
3.2.10 Easy-swap M.2 NVMe SSD Kit Installation (Add-on Kit Option) .......................87
3.2.11 IO Panel Screw-lock Holes ...............................................................................91
3.3 Installing the System Enclosure .............................................................................92
3.4 Mounting and Anti-vibration Damping Bracket Installation..................................95
3.5 Powering On the System.........................................................................................97
3.5.1 Powering On Using the Power Button...............................................................97
3.5.2 Powering On Using Wake-on-LAN....................................................................98
3.6 Ignition Power Control...........................................................................................100
3.6.1 Principles of Ignition Power Control................................................................100
3.6.2 Additional Features of Ignition Power Control.................................................101
3.6.3 Wiring Ignition Signal......................................................................................102
3.6.4 Configure your Windows system.....................................................................103
3.6.5 Operation Modes of Ignition Power Control....................................................104
4System Configuration
4.1 BIOS Settings .........................................................................................................106
4.1.1 COM Port Configuration..................................................................................107
4.1.2 COM Port High Speed Mode ..........................................................................108
4.1.3 Primary Display...............................................................................................109
4.1.4 Fan Control Configuration...............................................................................110
4.1.5 TPM Availability...............................................................................................115
4.1.6 Auto Wake on S5............................................................................................116
4.1.7 Power On After Power Failure Option.............................................................117
4.1.8 Power & Performance (CPU SKU Power Configuration)................................ 118
4.1.9 Wake on LAN Option ......................................................................................119
4.1.10 Boot Menu ......................................................................................................120
4.1.11 Position New Boot Device...............................................................................122
4.1.12 Watchdog Timer for Booting............................................................................123
4.2 AMT Configuration.................................................................................................124
5OS Support and Driver Installation
5.1 Operating System Compatibility...........................................................................125
5.2 Driver Installation...................................................................................................126
5.3 Driver Installation for Watchdog Time Control ....................................................126
Appendix A Using WDT & DIO
WDT and DIO Library Installation.....................................................................................128
WDT Functions...................................................................................................................130
InitWDT................................................................................................................................130
SetWDT ...............................................................................................................................130
StartWDT.............................................................................................................................131
ResetWDT ...........................................................................................................................131
StopWDT .............................................................................................................................131

Legal Information
Legal Information
All Neousys Technology Inc. products shall be subject to the latest Standard
Warranty Policy
Neousys Technology Inc. may modify, update or upgrade the software, firmware or
any accompanying user documentation without any prior notice. Neousys
Technology Inc. will provide access to these new software, firmware or
documentation releases from download sections of our website or through our
service partners.
Before installing any software, applications or components provided by a third party,
customer should ensure that they are compatible and interoperable with Neousys
Technology Inc. product by checking in advance with Neousys Technology Inc..
Customer is solely responsible for ensuring the compatibility and interoperability of
the third party’s products. Customer is further solely responsible for ensuring its
systems, software, and data are adequately backed up as a precaution against
possible failures, alternation, or loss.
For questions in regards to hardware/ software compatibility, customers should
contact Neousys Technology Inc. sales representative or technical support.
To the extent permitted by applicable laws, Neousys Technology Inc. shall NOT be
responsible for any interoperability or compatibility issues that may arise when (1)
products, software, or options not certified and supported; (2) configurations not
certified and supported are used; (3) parts intended for one system is installed in
another system of different make or model.

Contact Information/ Declaration of Conformity
Contact Information
Headquarters
(Taipei, Taiwan)
Neousys Technology Inc.
15F, No.868-3, Zhongzheng Rd., Zhonghe Dist., New Taipei City, 23586, Taiwan
Tel: [phone] Fax: [phone] Email, Website
Americas
(Illinois, USA)
Neousys Technology America Inc.
3384 Commercial Avenue, Northbrook, IL 60062, USA
Tel: [phone]Email, Website
China
Neousys Technology (China) Ltd.
Room 612, Building 32, Guiping Road 680, Shanghai
Tel: [phone]Email, Website
Declaration of Conformity
FCC
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at own expense.
CE
The product(s) described in this manual complies with all applicable European
Union (CE) directives if it has a CE marking. For computer systems to remain
CE compliant, only CE-compliant parts may be used. Maintaining CE
compliance also requires proper cable and cabling techniques.

Copyright Notice
Copyright Notice
All rights reserved. This publication may not be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any language or
computer language, in any form or by any means, electronic, mechanical,
magnetic, optical, chemical, manual or otherwise, without the prior written
consent of Neousys Technology, Inc.
Disclaimer
This manual is intended to be used as an informative guide only and is subject
to change without prior notice. It does not represent commitment from Neousys
Technology Inc. Neousys Technology Inc. shall not be liable for any direct,
indirect, special, incidental, or consequential damages arising from the use of
the product or documentation, nor for any infringement on third party rights.
Patents and
Trademarks
Neousys, the Neousys logo, Expansion Cassette, MezIOTM are registered
patents and trademarks of Neousys Technology, Inc.
Windows is a registered trademark of Microsoft Corporation.
Intel®, Core™are registered trademarks of Intel Corporation
NVIDIA®is a registered trademark of NVIDIA Corporation
All other names, brands, products or services are trademarks or registered
trademarks of their respective owners.

Safety Precautions
Safety Precautions
⚫Read these instructions carefully before you install, operate, or transport the
system.
⚫Install the system or DIN rail associated with, at a sturdy location
⚫Install the power socket outlet near the system where it is easily accessible
⚫Secure each system module(s) using its retaining screws
⚫Place power cords and other connection cables away from foot traffic. Do not
place items over power cords and make sure they do not rest against data
cables
⚫Shutdown, disconnect all cables from the system and ground yourself before
touching internal modules
⚫Ensure that the correct power range is being used before powering the device
⚫Should a module fail, arrange for a replacement as soon as possible to
minimize down-time
⚫If the system is not going to be used for a long time, disconnect it from mains
(power socket) to avoid transient over-voltage
Battery Warning
⚫Batteries are at risk of exploding if incorrectly installed.
⚫Do not attempt to recharge, force open, or heat the
battery.
⚫Replace the battery only with the same or equivalent type
recommended by the manufacturer.

Service and Maintenance/ ESD Precautions
Service and Maintenance
⚫ONLY qualified personnel should service the system
⚫Shutdown the system, disconnect the power cord and all other connections
before servicing the system
⚫When replacing/ installing additional components (expansion card, memory
module, etc.), insert them as gently as possible while assuring proper
connector engagement
ESD Precautions
⚫Handle add-on module, motherboard by their retention screws or the module’s
frame/ heat sink. Avoid touching the PCB circuit board or add-on module
connector pins
⚫Use a grounded wrist strap and an anti-static work pad to discharge static
electricity when installing or maintaining the system
⚫Avoid dust, debris, carpets, plastic, vinyl and 8tyrofoam in your work area.
⚫Do not remove any module or component from its anti-static bag before
installation
Restricted Access Location
The controller is intended for installation only in the certain environment where both
these condition apply:
⚫Access can only be gained by SERVICE PERSONS or by USERS who have
been instructed about the reasons for the restrictions applied to the location
and about any precautions that shall be taken
⚫Access is through the use of a TOOL or lock and key, or other means of
security, and is controlled by the authority responsible for the location.

About This Manual
About This Manual
This manual introduces Neousys Nuvo-10208GC series featuring Intel®13th/ 12th
Gen Core™35W/ 65W LGA1700 processors and dual NVIDIA® graphics cards. The
Nuvo-10208GC system supports dual 350W NVIDIA®graphics cards for advanced
inference capabilities.
The guide also demonstrates the system’s installation procedures.
Revision History
Version
Date
Description
1.0
Nov. 2023
Initial release

Nuvo-10208GC Series
10
1 Introduction
Nuvo-10208GC is an Intel® 13th/ 12th-Gen rugged edge AI platform supporting dual RTX 40
series/ RTX A6000/A4500 GPU cards to offer GPU performances up to 97 TFLOPS in FP32
for autonomous driving, vision inspection and surveillance applications.
The system is powered by an Intel® 13th/ 12th-Gen CPU with up to 24 cores/ 32 threads, and
offers up to twice the performance when compared to previous Intel 11th or 10th-Gen platforms.
It inherits a proven thermal dissipation design for the CPU and two 350W GPUs to optimize
overall system performance in harsh temperature conditions. To secure the bigger and
heavier NVIDIA® RTX™40 series GPU, Nuvo-10208GC features innovative, patent-pending
GPU locking brackets to fasten both GPUs to the chassis. It also features Neousys’ patented
damping bracket to guarantee rock-solid reliability for on-road and off-road in-vehicle
applications.
Nuvo-10208GC also incorporates an abundance of I/Os such as 3x 2.5GbE/GbE, 6x USB3.2
Gen2, 1x M.2 M key 2280 Gen4x4 NVMe, dual SATA trays with RAID 0/1 capability, dual
display ports and three additional PCIe slots for function expansion. Moreover, it’s equipped
with one optional 10G Ethernet port for high-bandwidth data transmission, and one optional
M.2 2280 NVMe tray for high-speed, removable data storage. Utilizing Intel’s 13th/ 12th-Gen
platform, proven thermal and rugged mechanical designs with rich I/O interfaces,
Nuvo-10208GC is a ruggedized edge AI platform that offers unprecedented GPU and CPU
computing power for various industrial edge AI applications.

Nuvo-10208GC Series
11
1.1 Product Specifications
1.1.1 Nuvo-10208GC Specifications
System Core
Processor
Supporting Intel® 13th-Gen Core™CPU
(LGA1700 socket, 65W/ 35W TDP)
- Intel® Core™i9-13900E/ i9-13900TE
- Intel® Core™i7-13700E/ i7-13700TE
- Intel® Core™i5-13500E/ i5-13400E/
i5-13500TE
- Intel® Core™i3-13100E/ i3-13100TE
Supports Intel® 12th-Gen Core™CPU
(LGA1700 socket, 35W/ 65W TDP)
- Intel® Core™i9-12900E/ i9-12900TE
- Intel® Core™i7-12700E/ i7-12700TE
- Intel® Core™i5-12500E/ i5-12500TE
- Intel® Core™i3-12100E/ i3-12100TE
- Intel® Pentium® G7400E/ G7400TE
- Intel® Celeron® G6900E/ G6900TE
Chipset
Intel® R680E Platform Controller Hub
Graphics
Integrated Intel® UHD Graphics 770 (32EU) / 730 (24EU)
Memory
Up to 64GB ECC/ non-ECC DDR5 4800 SDRAM (two SODIMM slots)
AMT
Supports Intel vPro/ AMT 16.0
TPM
Supports dTPM 2.0
I/O Interface
Ethernet
2x 2.5G Ethernet port by Intel® I226-IT
1x Gigabit Ethernet port by Intel® I219-LM
10G Ethernet
Optional 1x 10GBASE-T port by Marvell AQC113CS, supporting NBASE-T (5G/ 2.5G)
and 1000BASE-T
USB3.2
6x USB3.2 Gen2x1 (10Gbps) ports
USB2.0
1x USB2.0 port (internal dongle use)
Serial Port
2x software-programmable RS-232/ 422/ 485 ports (COM1/ COM2)
Video port
(integrated
graphics)
1x VGA connector, supporting 1920 x 1200 resolution
1x DisplayPort connector, supporting 4096 x 2304 resolution
Audio
1x 3.5mm jack for speaker-output and microphone-input
Storage Interface
SATA
2x hot-swappable HDD trays for 2.5” HDD/ SSD installation (supports RAID0/ 1)
M.2
1x M.2 2280 M key socket (PCIe Gen4 x4) for NVMe SSD
Optional 1x M.2 2280 M key tray (PCIe Gen4 x4) for NVMe SSD
Expansion Bus
PCI Express
2x PCIe x16 slot@Gen4, 8-lanes
3x PCIe x8 slots@Gen3, 4-lanes

Nuvo-10208GC Series
12
* For sub-zero operating temperature, a wide temperature HDD drive or Solid State Disk (SSD) is
required
** For CPU running in 65W mode, the optional fan kit is recommended for operating at ambient
temperatures higher than 50°C
Mini-PCIe
2x full-size mini-PCIe sockets with internal SIM sockets
M.2
1x M.2 2242/ 3052 B key socket with internal SIM socket
Power Supply
DC Input
3-pin + 4-pin pluggable terminal block for 8V to 48V DC input with ignition control
Mechanical
Dimension
268 mm (W) x 400 mm (D) x 196 mm (H)
Weight
6.5Kg
Mounting
Wall-mount with damping brackets
Environmental
Operating
temperature
With 35W CPU and dual NVIDIA® 350W GPU
-25°C to 60°C *
With 65W CPU and dual NVIDIA® 350W GPU
-25°C to 60°C */** (with optional fan kit)
-25°C to 50°C */** (without optional fan kit)
Storage
temperature
-40°C to 85°C
Humidity
10% to 90%, non-condensing
Vibration
MIL-STD-810H, Method 514.8, Category 4
Shock
MIL-STD-810H, Method 516.8, Procedure I
EMC
CE/ FCC Class A, according to EN 55032 & EN 55035

Nuvo-10208GC Series
13
1.2 Nuvo-10208GC Dimension
NOTE
All measurements are in millimeters (mm).
1.2.1 Nuvo-10208GC I/O Panel View

Nuvo-10208GC Series
14
1.2.2 Nuvo-10208GC Ignition/ 4/3-Pin Terminal Block Panel View

Nuvo-10208GC Series
15
1.2.3 Nuvo-10208GC Top Panel View

Nuvo-10208GC Series
16
1.2.4 Nuvo-10208GC Hot-swap Panel View
1.2.5 Nuvo-10208GC Bottom View

Nuvo-10208GC Series
17
1.2.6 Nuvo-10208GC Wall-mount Dimension

Nuvo-10208GC Series
18
2 System Overview
Upon receiving and unpacking your Nuvo-10208GC system, please check immediately if the
package contains all the items listed in the following table. If any item(s) are missing or
damaged, please contact your local dealer or Neousys Technology.
2.1 Nuvo-10208GC Packing List
System
Pack
Nuvo-10208GC
Qty
1
Nuvo-10208GC system
(If you ordered CPU/ RAM/ HDD, please verify these items)
1
2
Accessory box, which contains
⚫CPU bracket
⚫Damping bracket
⚫GPU bracket
⚫4-pin power terminal block
⚫3-pin power terminal block
⚫Screw pack
⚫17cm GPU power cable
⚫35cm GPU power cable
⚫Anti-vibration grommet
⚫GPU bracket
⚫Cable management holder
1
2
2
1
1
1
1
1
10
3
4

Nuvo-10208GC Series
19
2.2 External I/O Panel
No.
Item
Description
1
Power button
Use this button to turn on or shutdown the system.
2
4-pole 3.5mm
speaker-out/
microphone-in
jack
3.5mm jack for speaker-output and microphone-input.
3
Reset button
Use this button to manual reset the system.
4
VGA port
VGA output supports resolution up to 1920x1200@60Hz
5
DisplayPort
Support display resolutions up to 4096 x 2304. Compatible with HDMI/
DVI via respective adapter/ cable (resolution may vary).
6
LED indicator
From top to bottom, the four system LEDs are PWR (system power),
HDD (hard disk drive), WDT (watchdog timer) and IGN (ignition
control).
7
10Gb Ethernet
The optional 10Gb Ethernet port is backward compatible with
5GBASE-T, 2.5GBASE-T, and 1Gb Ethernet protocols.
8
CMOS reset
button
Use this button to manually reset the motherboard BIOS.
9
USB 3.2
Gen2x1 port
USB3.2 Gen2x1 port (SuperSpeed+) offers up to 10Gbps, twice the
bandwidth over existing SuperSpeed USB3.1 Gen. 1 connection. It is

Nuvo-10208GC Series
20
also backwards compatible with USB3.0 and USB2.0
10
2.5Gb
Ethernet port
2x 2.5Gb Ethernet ports by Intel I226-IT
11
1Gb Ethernet
port
1x 1Gb Ethernet port by Intel I219-LM
12
COM port
The software-selectable RS-232/422/485 ports. The operation mode
of COM1 and COM2 can be set in BIOS.
13
GPU slot
Secondary PCIe x16 slot @ Gen4, 8-lanes expansion slot
14
PCIe slots
3x PCIe x8 slots @ Gen3, 4-lanes expansion slot
15
GPU slot
Primary PCIe x16 slot @ Gen4, 8-lanes expansion slot
Reserved antenna opening
Reserved DB9 connector opening