Neousys Technology SEMIL-1700GC Series User manual

SEMIL-1700GC Series Quick Installation Guide• Only qualified service personnel should install and service this product to avoid injury. • Observe all ESD procedures during installation to avoid damaging the equipment. Unpack the equipment and make sure the following tools are available and delivered contents are correct before you begin the installation procedure.1-1. User-provided tools 1-2. Packing List • Anti-static wrist wrap1Preparing tools2USB PortWarning0102
SEMIL 1700GC series systemDrivers & utilities disc
11ItemDescriptionQuantityOverview3DC-IN4PoE+ Gigabit Ethernet Port5Please make sure the voltage of DC power is correct before you connect it to the system. Supplying a voltage over 48V will damage the system.WarningVGA Port6

Power Button9The power button is a non-latched switch for ATX mode on/off operation. To turn on the system, press the power button and the PWR LED should light-up green. To turn off the system, issuing a shutdown command in OS is preferred, or you can simply press the power button. To force shutdown when the system freezes, press and hold the power button for 5 seconds. Please note that there is a 5-second interval between on/off operations (i.e. once the system is turned off, there is a 5-second wait before you can power-on the system).Audio Port (SEMIL-1728GC/ 1748GC Only)7COM Port8