Neousys Technology Nuvo-7000 Series User manual

Neousys Technology Inc.
Nuvo-7000 Series
User Manual
Revision 1.3

Table of Contents
Table of Contents
Table of Contents...................................................................................................................2
Legal Information...................................................................................................................5
Contact Information...............................................................................................................6
Declaration of Conformity.....................................................................................................6
Copyright Notice....................................................................................................................7
Safety Precautions.................................................................................................................8
Service and Maintenance ......................................................................................................9
ESD Precautions....................................................................................................................9
About This Manual...............................................................................................................10
1Introduction
1.1 Product Specifications.............................................................................................13
1.1.1 Nuvo-7000E Specifications...............................................................................13
1.1.2 Nuvo-7000P Specifications...............................................................................16
1.1.3 Nuvo-7000DE Specifications............................................................................18
1.1.4 Nuvo-7000LP Specifications.............................................................................20
1.2 Nuvo-7000E/ P Dimension .......................................................................................22
1.2.1 Nuvo-7000E/ P Front Panel View .....................................................................22
1.2.2 Nuvo-7000E/ P Rear Panel View......................................................................22
1.2.3 Nuvo-7000E/ P Top View..................................................................................23
1.2.4 Nuvo-7000E/ P Bottom View.............................................................................24
1.3 Nuvo-7000DE Dimension.........................................................................................25
1.3.1 Nuvo-7000DE Front Panel View.......................................................................25
1.3.2 Nuvo-7000DE Rear Panel view ........................................................................25
1.3.3 Nuvo-7000DE Top View....................................................................................26
1.3.4 Nuvo-7000DE Bottom View ..............................................................................27
1.4 Nuvo-7000LP Dimension .........................................................................................28
1.4.1 Nuvo-7000LP Front Panel View........................................................................28
1.4.2 Nuvo-7000LP Rear Panel View ........................................................................28
1.4.3 Nuvo-7000LP Top View.....................................................................................29
1.4.4 Nuvo-7000LP Bottom View...............................................................................30
2System Overview
2.1 Packing List..............................................................................................................31
2.1.1 Nuvo-7000E/ P Series Packing List..................................................................31
2.1.2 Nuvo-7000DE Series Packing List....................................................................31
2.1.3 Nuvo-7000LP Series Packing List.....................................................................32
2.2 Front Panel I/O..........................................................................................................33
2.2.1 USB3.1 Gen 2 Port...........................................................................................35
2.2.2 USB3.1 Gen 1 Port...........................................................................................35
2.2.3 DVI Port............................................................................................................36
2.2.4 VGA Port...........................................................................................................37
2.2.5 DisplayPort........................................................................................................38
2.2.6 Micro-SIM (3FF) 1 & 2 Slots..............................................................................39
2.2.7 Ethernet Port/ PoE+..........................................................................................40
2.2.8 Reset Button.....................................................................................................41
2.2.9 LED Indicators ..................................................................................................41
2.2.10 Power Button ....................................................................................................42
2.2.11 Hot-swappable 2.5” HDD/ SSD Slot (Nuvo-7000LP Series Only).....................42
2.2.12 Cassette Module...............................................................................................43
2.3 Rear Panel I/O...........................................................................................................44
2.3.1 4-Pole 3.5mm Headphone/ Microphone Jack...................................................46
2.3.2 COM Ports........................................................................................................47
2.3.3 3-Pin Terminal Block for DC and Ignition Input..................................................48
2.3.4 3-Pin Remote On/ Off .......................................................................................48
2.4 Internal I/O Functions...............................................................................................49
2.4.1 Clear CMOS Button..........................................................................................49

Table of Contents
3
2.4.2 Dual SODIMM DRAM Slot................................................................................50
2.4.3 Dual Mode mSATA/ mini-PCIe Socket & Pin Definition.....................................51
2.4.4 M.2 2242 (B Key), Mini-SIM Card Slot & Pin Definition.....................................53
2.4.5 SATA Ports........................................................................................................55
2.4.6 DIP Switch ........................................................................................................56
2.4.7 On/ Off Ctrl & Status Output..............................................................................57
2.4.8 Internal USB 2.0 Port........................................................................................58
2.4.9 M.2 2280 (M Key) Slot for NVMe SSD or OptaneTM Memory............................59
2.4.10 MezIOTM Interface & Pin Definition....................................................................61
3System Installation
3.1 Disassembling the System......................................................................................64
3.2 Installing Internal Components...............................................................................71
3.2.1 CPU Installation Procedure...............................................................................71
3.2.2 DDR4 SO-DIMM Installation.............................................................................77
3.2.3 mPCIe Module, Mini-SIM (2FF) Card and Antennae Installation.......................79
3.2.4 M.2 2242 (B Key) Module and Micro-SIM (3FF) Card Installation.....................81
3.2.5 M.2 2280 NVMe SSD or Intel®OptaneTM Memory Installation..........................83
3.2.6 MezIOTM Module Installation.............................................................................85
3.2.7 HDD/ SSD Installation (Nuvo-7000E/ P/ DE Systems).....................................88
3.2.8 HDD/ SSD Installation (Nuvo-7000LP Systems Only) ......................................91
3.2.9 HDD/ SSD Installation to Hot Swappable Tray (Nuvo-700LP Systems Only)...94
3.2.10 Ethernet/ PoE+ Port Panel Screw Fix...............................................................95
3.2.11 PCIe/ PCI Card Installation into Cassette Module (Nuvo-7000E/ P/ DE Only)..96
3.3 Installing the System Enclosure ...........................................................................100
3.4 Wall Mount Bracket/ DIN-rail Installation..............................................................105
3.4.1 Wall Mount Bracket Installation.......................................................................105
3.4.2 DIN-rail Installation (Optional).........................................................................107
3.5 Powering On the System .......................................................................................108
3.5.1 Powering On Using the Power Button.............................................................108
3.5.2 Powering On Using External Non-latched Switch...........................................109
3.5.3 Powering On Using Wake-on-LAN..................................................................110
4System Configuration
4.1 BIOS Settings .........................................................................................................112
4.1.1 COM Port Configuration..................................................................................113
4.1.2 COM Port High Speed Mode..........................................................................114
4.1.3 Delay for PEG Initialization.............................................................................115
4.1.4 SATA Configuration.........................................................................................116
4.1.5 TPMAvailability...............................................................................................118
4.1.6 Auto Wake on S5............................................................................................119
4.1.7 Power On After Power Failure Option.............................................................120
4.1.8 Power & Performance (CPU SKU Power Configuration)................................121
4.1.9 Wake on LAN Option ......................................................................................122
4.1.10 Boot Menu ......................................................................................................123
4.1.11 Boot Type (Legacy/ UEFI)...............................................................................125
4.1.12 Position New Boot Device...............................................................................126
4.1.13 Watchdog Timer for Booting............................................................................127
4.1.14 Legacy/ UEFI Boot Device..............................................................................128
4.2 AMT Configuration.................................................................................................129
4.3 RAID Configuration................................................................................................130
4.3.1 Legacy Mode RAID Configuration...................................................................130
4.3.2 UEFI Mode RAID Configuration......................................................................136
5OS Support and Driver Installation
5.1 Operating System Compatibility...........................................................................146
5.2 Driver Installation...................................................................................................147
5.2.1 Install Drivers Automatically............................................................................147
5.2.2 Install Drivers Manually...................................................................................148
5.3 Driver Installation for Watchdog Timer Control...................................................149

Safety Precautions
4
5.4 Intel®OptaneTM Memory BIOS Setup and Driver Installation..............................150
Appendix A Using WDT & DIO
WDT and DIO Library Installation.....................................................................................160
WDT Functions...................................................................................................................162
InitWDT................................................................................................................................162
SetWDT ...............................................................................................................................162
StartWDT.............................................................................................................................163
ResetWDT ...........................................................................................................................163
StopWDT .............................................................................................................................163
Appendix B PoE On/ Off Control
GetStatusPoEPort..............................................................................................................164
EnablePoEPort...................................................................................................................165
DisablePoEPort..................................................................................................................166

Legal Information
Legal Information
All Neousys Technology Inc. products shall be subject to the latest Standard
Warranty Policy
Neousys Technology Inc. may modify, update or upgrade the software, firmware or
any accompanying user documentation without any prior notice. Neousys
Technology Inc. will provide access to these new software, firmware or
documentation releases from download sections of our website or through our
service partners.
Before installing any software, applications or components provided by a third party,
customer should ensure that they are compatible and interoperable with Neousys
Technology Inc. product by checking in advance with Neousys Technology Inc..
Customer is solely responsible for ensuring the compatibility and interoperability of
the third party’s products. Customer is further solely responsible for ensuring its
systems, software, and data are adequately backed up as a precaution against
possible failures, alternation, or loss.
For questions in regards to hardware/ software compatibility, customers should
contact Neousys Technology Inc. sales representative or technical support.
To the extent permitted by applicable laws, Neousys Technology Inc. shall NOT be
responsible for any interoperability or compatibility issues that may arise when (1)
products, software, or options not certified and supported; (2) configurations not
certified and supported are used; (3) parts intended for one system is installed in
another system of different make or model.

Contact Information/ Declaration of Conformity
Contact Information
Headquarters
(Taipei, Taiwan)
Neousys Technology Inc.
15F, No.868-3, Zhongzheng Rd., Zhonghe Dist., New Taipei City, 23586, Taiwan
Tel: [phone] Fax: [phone] Email, Website
Americas
(Illinois, USA)
Neousys Technology America Inc.
3384 CommercialAvenue, Northbrook, IL 60062, USA
Tel: [phone]Email, Website
China Neousys Technology (China) Ltd.
Room 612, Building 32, Guiping Road 680, Shanghai
Tel: [phone]Email, Website
Declaration of Conformity
FCC This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at own expense.
CE The product(s) described in this manual complies with all applicable European
Union (CE) directives if it has a CE marking. For computer systems to remain
CE compliant, only CE-
compliant parts may be used. Maintaining CE
compliance also requires proper cable and cabling techniques.

Copyright Notice
Copyright Notice
All rights reserved. This publication may not be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any language or
computer language, in any form or by any means, electronic, mechanical,
magnetic, optical, chemical, manual or otherwise, without the prior written
consent of Neousys Technology, Inc.
Disclaimer This manual is intended to be used as an informative guide only and is subject
to change without prior notice. It does not represent commitment from Neousys
Technology Inc. Neousys Technology Inc. shall not be liable for any direct,
indirect, special, incidental, or consequential damages arising from the use of
the product or documentation, nor for any infringement on third party rights.
Patents and
Trademarks
Neousys, the Neousys logo, Expansion Cassette, MezIOTM are registered
patents and trademarks of Neousys Technology, Inc.
Windows is a registered trademark of Microsoft Corporation.
Intel®, Core™ are registered trademarks of Intel Corporation
NVIDIA®is a registered trademark of NVIDIA Corporation
All other names, brands, products or services are trademarks or registered
trademarks of their respective owners.

Safety Precautions
Safety Precautions
Read these instructions carefully before you install, operate, or transport the
system.
Install the system or DIN rail associated with, at a sturdy location
Install the power socket outlet near the system where it is easily accessible
Secure each system module(s) using its retaining screws
Place power cords and other connection cables away from foot traffic. Do not
place items over power cords and make sure they do not rest against data
cables
Shutdown, disconnect all cables from the system and ground yourself before
touching internal modules
Ensure that the correct power range is being used before powering the device
Should a module fail, arrange for a replacement as soon as possible to
minimize down-time
If the system is not going to be used for a long time, disconnect it from mains
(power socket) to avoid transient over-voltage

Service and Maintenance/ ESD Precautions
Service and Maintenance
ONLY qualified personnel should service the system
Shutdown the system, disconnect the power cord and all other connections
before servicing the system
When replacing/ installing additional components (expansion card, memory
module, etc.), insert them as gently as possible while assuring proper
connector engagement
ESD Precautions
Handle add-on module, motherboard by their retention screws or the module’s
frame/ heat sink. Avoid touching the PCB circuit board or add-on module
connector pins
Use a grounded wrist strap and an anti-static work pad to discharge static
electricity when installing or maintaining the system
Avoid dust, debris, carpets, plastic, vinyl and styrofoam in your work area.
Do not remove any module or component from its anti-static bag before
installation

About This Manual
About This Manual
This manual introduces Neousys Nuvo-7000 series featuring Intel® 8th/ 9th Gen
Core™ i hexa/ octa core 35W/ 65W TDP LGA1151 processors.
The guide also demonstrates the system’s installation procedures.
Applicable systems:
System Description
Nuvo-7002E Intel® Coffee Lake 8th/ 9th Gen Core™ i fanless embedded controller with 2x GbE,
1-slot PCIe Cassette and MezIOTM interface
Nuvo-7002P Intel® Coffee Lake 8th/ 9th Gen Core™ i fanless embedded controller with 2x GbE,
1-slot PCI Cassette and MezIOTM interface
Nuvo-7002DE Intel® Coffee Lake 8th/ 9th Gen Core™ i fanless embedded controller with 2x GbE,
2-slot PCIe Cassette and MezIOTM interface
Nuvo-7006E Intel® Coffee Lake 8th/ 9th Gen Core™ i fanless embedded controller with 6x GbE,
1-slot PCIe Cassette and MezIOTM interface
Nuvo-7006P Intel® Coffee Lake 8th/ 9th Gen Core™ i fanless embedded controller with 6x GbE,
1-slot PCI Cassette and MezIOTM interface
Nuvo-7006DE Intel® Coffee Lake 8th/ 9th Gen Core™ i fanless embedded controller with 6x GbE,
2-slot PCIe Cassette and MezIOTM interface
Nuvo-7006E-PoE Intel® Coffee Lake 8th/ 9th Gen Core™ i fanless embedded controller with 6x GbE,
1-slot PCIe Cassette and MezIOTM interface, with optional IEEE 802.3at PoE+
Nuvo-7006P-PoE Intel® Coffee Lake 8th/ 9th Gen Core™ i fanless embedded controller with 6x GbE,
1-slot PCI Cassette and MezIOTM interface, with optional IEEE 802.3at PoE+
Nuvo-7006DE-PoE Intel® Coffee Lake 8th/ 9th Gen Core™ i fanless embedded controller with 6x GbE,
2-slot PCIe Cassette and MezIOTM interface, with optional IEEE 802.3at PoE+
Nuvo-7002LP Intel® Coffee Lake 8th/ 9th Gen Core™ i fanless embedded controller with 2x GbE,
MezIOTM interface and low-profile chassis
Nuvo-7006LP Intel® Coffee Lake 8th/ 9th Gen Core™ i fanless embedded controller with 6x GbE,
MezIOTM interface and low-profile chassis
Nuvo-7006LP-PoE Intel® Coffee Lake 8th/ 9th Gen Core™ i fanless embedded controller with 6x GbE,
MezIOTM interface and low-profile chassis, with optional IEEE 802.3at PoE+

11
Revision History
Version Date Description
1.0 Mar. 2019 Initial release
1.1 Apr. 2019 Updated maximum 15mm 2.5" SSD/ HDD thickness supported
1.2 Jul. 2019 Updated 9th Gen Intel processor support
1.3 Dec. 2020 Updated DIP switch settings

12
1 Introduction
The Neousys Nuvo-7000 series is one of the world’s first industrial-grade embedded
computers to utilize Intel’s 8th/ 9th Gen. Coffee Lake Core i processors.
The latest Intel Coffee Lake processors are available in quad (Core-i3), hexa (Core-i5
and i7) and octa (i7 9th Gen.) core configurations offering significant performance boosts
over previous 6th and 7th Gen Core i processors. The system is based on Intel’s Q370
platform and supports up to 64GB of DDR4-2666 memory.
Nuvo-7000E/ P series
Nuvo-7000LP series Nuvo-7000DE series
Nuvo-7000 series features multiple Neousys patented add-on technology options such
as Cassette module, MezIOTM interface and supercapacitor-base power-backup solution
for extra functionalities. Users can install off-the-shelf PCIe and PCI add-on card(s) into
the expansion Cassette; select MezIOTM module for extra functions such as DIO,
RS-232/ 422/ 485, GbE, USB3 or ignition power control; it is also compatible with
PB-2500J, Neousys’ patented supercapacitor-based power-backup solution. The
addition of PB-2500J further allows Nuvo-7000 systems to handle power fluctuation and
unforeseen power outages. The combination of PB-2500J and Nuvo-7000 redefines
embedded ruggedness and offers users an extra piece of mind.
Flexible and versatile for a variety of applications, Nuvo-7000 variants are available with
different Cassette expansion options. With Neousys Nuvo-7000 series, you get a true
rugged platform that can accommodate a single PCIe card (Nuvo-7000E series), dual
PCIe cards (Nuvo-7000DE series) or a single PCI card (Nuvo-7000P series) according
your application needs.

13
1.1 Product Specifications
1.1.1 Nuvo-7000E Specifications
Applicable systems: Nuvo-7002E/ 7006E/ 7006E-PoE
System Core
Processor
Supporting Intel® 8th/ 9th Gen Coffee Lake 6/ 8 core CPU (LGA1151
socket, 65W/ 35W TDP)
- Intel® Core™i7-9700E/ i7-9700TE
- Intel® Core™i7-8700/ i7-8700T
- Intel® Core™i5-9500E/ i5-9500TE
- Intel® Core™i5-8500/ i5-8500T
- Intel® Core™ i3-9100E/ i3-9100TE
- Intel® Core™ i3-8100/ i3-8100T
Chipset Intel® Q370 Platform Controller Hub
Graphics Integrated Intel® UHD Graphics 630
Memory Up to 64GB DDR4 2666/ 2400 SDRAM (two SODIMM slots)
AMT Supports AMT 12.0
TPM Supports TPM 2.0
I/O Interface
Ethernet port 2x Gigabit Ethernet ports by I219 and I210 (Nuvo-7002E)
6x Gigabit Ethernet ports by I219 and 5x I210 (Nuvo-7006E)
PoE+ IEEE 802.3at PoE+ PSE for Port 3 ~ Port 6 (Nuvo-7006E-PoE)
100 W total power budget
USB
via Intel native xHCI controller
4x USB 3.1 Gen2 (10Gbps) ports
4x USB 3.1 Gen1 (5Gbps) ports
Video Port
1x VGA connector, supporting 1920 x 1200 resolution
1x DVI-D connector, supporting 1920 x 1200 resolution
1x DisplayPort connector, supporting 4096 x 2304 resolution
Serial Port 2x software-programmable RS-232/ 422/ 485 ports (COM1/ COM2)
2x RS-232 ports (COM3/ COM4)
Audio 1x 3.5 mm jack for mic-in and speaker-out
Storage Interface
SATA HDD 2x internal SATA ports for 2.5” HDD/ SSD (up to 15mm thickness),
supporting RAID 0/1
M.2 NVMe 1x M.2 2280 M key NVMe socket (PCIe Gen3 x4) for NVMe SSD or

14
*For i7-8700 running at 65W mode, the highest operating temperature shall be limited to
50°C and thermal throttling may occur when sustained full-loading applied. Users can
configure CPU power in BIOS to allow higher operating temperature.
Intel® OptaneTM memory installation
mSATA 1x full-size mSATA port (mux with mini-PCIe)
Internal Expansion Bus
PCI Express
Slot
1x PCIe x16 slot@Gen3, 8-lanes PCIe signals in Cassette module
Mini PCI-E 1x full-size mini PCI Express socket with internal SIM socket (mux with
mSATA)
M.2 1x M.2 2242 B key socket with dual front-accessible SIM sockets
supporting dual SIM mode with selected M.2 LTE module
Expandable I/O 1x MezIOTM expansion port for Neousys MezIOTM modules
Power Supply
DC Input 1x 3-pin pluggable terminal block for 8~35VDC DC input
Remote Ctrl.
&LED Output
1x 3-pin pluggable terminal block for remote control and PWR LED
output
Maximum
Power
Consumption
With i7-8700T (35W mode): 72W (Max.) @ 24V
With i5-8500T (35W mode): 68.4W (Max.) @ 24V
With i3-8100T (35W mode): 62.64W (Max.) @ 24V
Mechanical
Dimension 240 mm (W) x 225 mm (D) x 90 mm (H)
Weight 3.58Kg (approx.)
Mounting Wall-mounting (standard) or DIN-rail mounting (optional)
Environmental
Operating
Temperature
With 35W CPU
-25°C ~ 70°C **
With 65W CPU
-25°C ~ 70°C */ ** (configured as 35W TDP)
-25°C ~ 50°C */ ** (configured as 65W TDP)
Storage
Temperature -40°C ~85°C
Humidity 10%~90% , non-condensing
Vibration Operating, MIL-STD-810G, Method 514.6, Category 4
Shock Operating, MIL-STD-810G, Method 516.6, Procedure I, Table 516.6-II
EMC CE/ FCC Class A, according to EN 55032 & EN 55024

15
** For sub-zero operating temperature, a wide temperature HDD or Solid State Disk
(SSD) is required.

16
1.1.2 Nuvo-7000P Specifications
Applicable systems: Nuvo-7002P/ 7006P/ 7006P-PoE
System Core
Processor
Supporting Intel® 8th/ 9th Generation Coffee Lake CPU (LGA1151
socket, 65W/ 35W TDP)
- Intel® Core™i7-8700/ i7-8700T
- Intel® Core™i5-8500/ i5-8500T
- Intel® Core™ i3-8100/ i3-8100T
- Intel® Pentium® G5400/ G5400T
- Intel® Celeron® G4900/ G4900T
Chipset Intel® Q370 Platform Controller Hub
Graphics Integrated Intel® UHD Graphics 630
Memory Up to 64GB DDR4 2666/ 2400 SDRAM (two SODIMM slots)
AMT Supports AMT 12.0
TPM Supports TPM 2.0
I/O Interface
Ethernet port 2x Gigabit Ethernet ports by I219 and I210 (Nuvo-7002P)
6x Gigabit Ethernet ports by I219 and 5x I210 (Nuvo-7006P)
PoE+ IEEE 802.3at PoE+ PSE for Port 3 ~ Port 6 (Nuvo-7006P-PoE)
100 W total power budget
USB
via Intel native xHCI controller
4x USB 3.1 Gen2 (10Gbps) ports
4x USB 3.1 Gen1 (5Gbps) ports
Video Port
1x VGA connector, supporting 1920 x 1200 resolution
1x DVI-D connector, supporting 1920 x 1200 resolution
1x DisplayPort connector, supporting 4096 x 2304 resolution
Serial Port 2x software-programmable RS-232/ 422/ 485 ports (COM1/ COM2)
2x RS-232 ports (COM3/ COM4)
Audio 1x 3.5 mm jack for mic-in and speaker-out
Storage Interface
SATA HDD 2x internal SATA ports for 2.5” HDD/ SSD (up to 15mm thickness),
supporting RAID 0/1
M.2 NVMe 1x M.2 2280 M key NVMe socket (PCIe Gen3 x4) for NVMe SSD or
Intel® OptaneTM memory installation
mSATA 1x full-size mSATA port (mux with mini-PCIe)
Internal Expansion Bus

17
*For i7-8700 running at 65W mode, the highest operating temperature shall be limited to
50°C and thermal throttling may occur when sustained full-loading applied. Users can
configure CPU power in BIOS to obtain higher operating temperature.
** For sub-zero operating temperature, a wide temperature HDD or Solid State Disk
(SSD) is required.
PCI Slot 1x PCI slot in Cassette
Mini PCI-E 1x full-size mini PCI Express socket with internal SIM socket (mux with
mSATA )
M.2 1x M.2 2242 B key socket with dual front-accessible SIM sockets
supporting dual SIM mode with selected M.2 LTE module
Expandable I/O 1x MezIOTM expansion port for Neousys MezIOTM modules
Power Supply
DC Input 1x 3-pin pluggable terminal block for 8~35VDC DC input
Remote Ctrl.
&LED Output
1x 3-pin pluggable terminal block for remote control and PWR LED
output
Maximum
Power
Consumption
With i7-8700T (35W mode): 72W (Max.) @ 24V
With i5-8500T (35W mode): 68.4W (Max.) @ 24V
With i3-8100T (35W mode): 62.64W (Max.) @ 24V
Mechanical
Dimension 240 mm (W) x 225 mm (D) x 90 mm (H)
Weight 3.58 Kg (approx.)
Mounting Wall-mounting (standard) or DIN-rail mounting (optional)
Environmental
Operating
Temperature
With 35W CPU
-25°C ~ 70°C **
With 65W CPU
-25°C ~ 70°C */** (configured as 35W TDP)
-25°C ~ 50°C */** (configured as 65W TDP)
Storage
Temperature -40°C ~85°C
Humidity 10%~90% , non-condensing
Vibration Operating, MIL-STD-810G, Method 514.6, Category 4
Shock Operating, MIL-STD-810G, Method 516.6, Procedure I, Table 516.6-II
EMC CE/ FCC Class A, according to EN 55032 & EN 55024

18
1.1.3 Nuvo-7000DE Specifications
Applicable systems: Nuvo-7002DE/ 7006DE/ 7006DE-PoE
System Core
Processor
Supporting Intel® 8th/ 9th Generation Coffee Lake CPU (LGA1151
socket, 65W/ 35W TDP)
- Intel® Core™i7-8700/ i7-8700T
- Intel® Core™i5-8500/ i5-8500T
- Intel® Core™ i3-8100/ i3-8100T
- Intel® Pentium® G5400/ G5400T
- Intel® Celeron® G4900/ G4900T
Chipset Intel® Q370 Platform Controller Hub
Graphics Integrated Intel® UHD Graphics 630
Memory Up to 64GB DDR4 2666/ 2400 SDRAM (two SODIMM slots)
AMT Supports AMT 12.0
TPM Supports TPM 2.0
I/O Interface
Ethernet port 2x Gigabit Ethernet ports by I219 and I210 (Nuvo-7002DE)
6x Gigabit Ethernet ports by I219 and 5x I210 (Nuvo-7006DE)
PoE+ IEEE 802.3at PoE+ PSE for Port 3 ~ Port 6 (Nuvo-7006DE-PoE)
100 W total power budget
USB
via Intel native xHCI controller
4x USB 3.1 Gen2 (10Gbps) ports
4x USB 3.1 Gen1 (5Gbps) ports
Video Port
1x VGA connector, supporting 1920 x 1200 resolution
1x DVI-D connector, supporting 1920 x 1200 resolution
1x DisplayPort connector, supporting 4096 x 2304 resolution
Serial Port 2x software-programmable RS-232/ 422/ 485 ports (COM1/ COM2)
2x RS-232 ports (COM3/ COM4)
Audio 1x 3.5 mm jack for mic-in and speaker-out
Storage Interface
SATA HDD 2x internal SATA ports for 2.5” HDD/ SSD (up to 15mm thickness),
supporting RAID 0/1
M.2 NVMe 1x M.2 2280 M key NVMe socket (PCIe Gen3 x4) for NVMe SSD or
Intel® OptaneTM memory installation
mSATA 1x full-size mSATA port (mux with mini-PCIe)
Internal Expansion Bus

19
*
For i7-8700 running at 65W mode, the highest operating temperature shall be limited to
50°C and thermal throttling may occur when sustained full-loading applied. Users can
configure CPU power in BIOS to obtain higher operating temperature.
** For sub-zero operating temperature, a wide temperature HDD or Solid State Disk
(SSD) is required.
PCI Express 2x PCIe x8 slot@Gen3, 4-lanes PCIe signals in Cassette
Mini PCI-E 1x full-size mini PCI Express socket with internal SIM socket (mux with
mSATA)
M.2 1x M.2 2242 B key socket with dual front-accessible SIM sockets
supporting dual SIM mode with selected M.2 LTE module
Expandable I/O 1x MezIOTM expansion port for Neousys MezIOTM modules
Power Supply
DC Input 1x 3-pin pluggable terminal block for 8~35VDC DC input
Remote Ctrl. &
Status Output
1x 3-pin pluggable terminal block for remote control and PWR LED
output
Maximum
Power
Consumption
With i7-8700T (35W mode): 72W (Max.) @ 24V
With i5-8500T (35W mode): 68.4W (Max.) @ 24V
With i3-8100T (35W mode): 62.64W (Max.) @ 24V
Mechanical
Dimension 240 mm (W) x 225 mm (D) x 110.5 mm (H)
Weight 3.7 Kg (approx.)
Mounting Wall-mounting (standard) or DIN-rail mounting (optional)
Environmental
Operating
Temperature
With 35W CPU
-25°C ~ 70°C **
With 65W CPU
-25°C ~ 70°C */ ** (configured as 35W TDP)
-25°C ~ 50°C */ ** (configured as 65W TDP)
Storage
Temperature -40°C ~85°C
Humidity 10%~90% , non-condensing
Vibration Operating, MIL-STD-810G, Method 514.6, Category 4
Shock Operating, MIL-STD-810G, Method 516.6, Procedure I, Table 516.6-II
EMC CE/ FCC Class A, according to EN 55032 & EN 55024

20
1.1.4 Nuvo-7000LP Specifications
Applicable systems: Nuvo-7002LP/ 7006LP/ 7006LP-PoE
System Core
Processor
Supporting Intel® 8th/ 9th Generation Coffee Lake CPU (LGA1151
socket, 65W/ 35W TDP)
- Intel® Core™ i7-8700/ i7-8700T
- Intel® Core™i5-8500/ i5-8500T
- Intel® Core™i3-8100/ i3-8100T
- Intel® Pentium® G5400/ G5400T
- Intel® Celeron® G4900/ G4900T
Chipset Intel® Q370 Platform Controller Hub
Graphics Integrated Intel® UHD Graphics 630
Memory Up to 64GB DDR4 2666/ 2400 SDRAM (two SODIMM slots)
AMT Supports AMT 12.0
TPM Supports TPM 2.0
I/O Interface
Ethernet port 2x Gigabit Ethernet ports by I219 and I210 (Nuvo-7002LP)
6x Gigabit Ethernet ports by I219 and 5x I210 (Nuvo-7006LP)
PoE+ IEEE 802.3at PoE+ PSE for Port 3 ~ Port 6 (Nuvo-7006LP-PoE)
100 W total power budget
USB
via Intel native xHCI controller
4x USB 3.1 Gen2 (10Gbps) ports
4x USB 3.1 Gen1 (5Gbps) ports
Video Port
1x VGA connector, supporting 1920 x 1200 resolution
1x DVI-D connector, supporting 1920 x 1200 resolution
1x DisplayPort connector, supporting 4096 x 2304 resolution
Serial Port 2x software-programmable RS-232/ 422/ 485 ports (COM1/ COM2)
2x RS-232 ports (COM3/ COM4)
Audio 1x 3.5 mm jack for mic-in and speaker-out
Storage Interface
SATA HDD
Supports RAID 0/ 1
1x front-accessible, hot-swappable 2.5” HDD/SSD (up to 9.5mm
thickness) tray
1x internal SATA port for 2.5” HDD/SSD (up to 15mm thickness)
M.2 NVMe 1x M.2 2280 M key NVMe socket (PCIe Gen3 x4) for NVMe SSD or
Intel® OptaneTM Memory installation