No Butts Bin SR1560-F User manual

Assembly Instructions
Product code: SR1560 -F
Doc. No.: SR1560-F-04-130219-USA

1
5
4
6
10
9
11
6
7
8
12
2
3
13
9
10
EXPLODED VIEW AND TOOLS
2
Tools required:
Drill/Screwdriver
Mallet
Hack saw
Spanner
Torx bit
ITEM
NO. PART NAME
DRG NUMBER LENGTH
Default/QT
Y.
1 S1C Frame S1C
Default
8
2 CB1 Bracket CB1
Default
8
3 JF1 Bracket JF1
Default
9
4 FT1 Bracket FT1
Default
2
5 FT3 Bracket FT3
Default
7
6 RB1 Bracket RB1
Default
16
7 R1 Rafter R1
Default
5
8 Sealing Strip SS
Default
8
9 ACE1 Roof Panel
Default
2
10 ACC1 Roof Panel
Default
2
11 RC1 Roof Strip
Default
5
12 ST3 Roof Tie ST3
Default
1
13 A2 Angle A2
Default
8
14 40x40 End cap BOUGHT IN ITEM
40 x 40 x
20 12

3
PARTS LIST AND FITTINGS
Fittings Bolt set M10 T25 AB1210
M10 x 60mm Nut Washer
Black
Cap
25 mm
Tech
screw
M10/12 x 100
mm Concrete
Bolt
Pack C+D 40 40 80 80 202 13
Required 19 19 38 38 100 9
Image
ITEM NO. PART NO. DESCRIPTION DIMENSION (MM)
DIMESNSION
(INCHES)
IMAGE QTY.
1 S1C Frame 2000x1035 78.74x40.75 8
2 CB1 Bracket 110x110 4.33x4.33 8
3 JF1 Bracket 220 x 40 7.87x1.58 9
4 FT1 Bracket 1035 x 50 x 50 4.29x3.94x1.58 2
5 FT3 Bracket 109x100x80 4.29x3.94x3.15 7
6 RB1 Bracket 110x42x40 4.33x1.81 16
7 R1 Rafter 1130x40x40 44.49x1.58x1.58 5
8 SS Sealing Strip 110 x 110 TRIM TO 44.69 2 ROLLS
9 ACE1 Roof Panel 1130 x 1050 44.49x41.34 2
10 ACC1 Roof Panel 1130 x 1030 44.49x40.55 2
11 RC1 Roof Strip 1130 44.49 5
12 ST3 Roof Tie 2060x40x40 88.98x1.58x1.58 1
13 A2 Roof Edge Trim 109 x 100 x 80
40.55 x 1.97 x 1.97
8
14 EC40
Plastic
End Cap
40x40
1.57 x 1.57
18

4180
1075
1075
42.32
164.57
42.32
A
Check overall dimensions
to ensure correct alignment
NOTE: Insert EC40 into
ST3 before installing.
CB1
JF1
S1C FRAME
ST3
DETAIL A
SCALE 1 : 7
CB1 UNDERNEATH
JF1 ON INNER
ST3 TIE BAR
CB1CB1CB1CB1
Ensure correct
alignement on all corners
Step 1
Assemble S1C frames to make up the main structure using CB1 brackets
for the corners and JF1 brackets for straight joints. Also use CB1 and JF1
brackets to secure the ST3 tie bar.
4
BLUE DIMENSIONS - MM
GREEN DIMENSIONS - INCH

RB1
R1
3.
1035 1035
C
FT3 FT1
1.
RB1 R1
995
39.17
1035 1035 1035 1035
40.75 40.75 40.75 40.75
SCALE 1 : 30
Step 2
Move the Shelter to its final position and attach all FT1 and FT3 foot brackets.
Then a
ttach R1 roof rafters using RB1 brackets.
5
2.

SS
ACE1
ACE1
ACC1
ACC1
ACE1
ACE1
ACC1
ACC1
SS
Step 3
Apply sealing strips (SS) to the top of the rafters then arange the roof panels by
lining up the end panels( ACE1 ) flush with the rafters and leaving a gap between
the middle pieces( ACC1 ).
6

RC1
A2
RC1
A2
Step 4
Secure the roof panels in place by drilling the RC1 strips directly
into the frame of the shelter using the 25mm Tech screws.
Push
fit the plastic caps on exposed nuts and bolts.
Use a mallet to fit the square plastic end caps ( EC40 )to any open
ends of box sections. Screw the A2 Angle sections in place
along the edges of the roof.
7

995
1056.50
2171.50 1035 1044.50
1044.50
1035 1035 1035
1135.63
4180 OR 164.57
4251 OR 167.36 TO FOOT HOLE CENTERS
41.12 40.75 85.49
44.71
39.17
41.12 40.75 40.75 40.75
41.12
8
GROUND ANCHOR POSITIONS AND OVERALL SIZE
SUGESTED SIZE FOR BASE: 200mm OR 7.87Inch OVERSIZES ON ALL 4 SIDES
Scale 1:20

Notes:
9

Notes:
10

Notes:
11

12
MAINTENANCE:
To ensure your products give you many years of use we recommend that you:
THANK YOU
FOR PURCHASING THIS PRODUCT
Clean panels regularly with soapy water •
Ensure all fitting are tight (for example after a big storm) •
Touch up any exposed metal should it get scratched •
CONTACT DETAILS:
Email : [email protected]
Web : www.nobutts.com
Tel : [phone]
No Butts Bin Company, Inc. 16 Birch Lane, Madison, CT 06443
All Parts and Fixing checked by:
Print Name: Signature