No Butts Bin SR1562 User manual

Peter Tremetsberger
09/05/2017
Assembly Instructions
Shelter type: SR1562
SR1562-05-200219-USA
Added "M5" to S3 Frame in BOM

1
2
3
4
10
12
13
14
12
11
5
9
6
8
7
15
2
Exploded View of Shelter
Tools required:
Drill/Screwdriver
Mallet
Hack saw
Wrench
Torx bit
ITEM
NO. PART NAME
DRG NUMBER LENGTH
Default/QT
Y.
1 S1 Frame S1
Default
7
2 S3 Frame S3
Default
1
3 CB1 Bracket CB1
Default
7
4 JF1 Bracket JF1
Default
10
5 ST5 Roof Tie ST5
Default
1
6 P1 Post P1
Default
1
7 FT1 Bracket FT1
Default
3
8 FT3 Bracket FT3
Default
7
9 RB1 Bracket RB1
Default
12
10 R2 Rafter R2
Default
4
11 Sealing Strip - 2195mm Sealing Strip
Default
6
12 ACE2 Roof Panel
Default
2
13 ACC2 Roof Panel
Default
1
14 RC2 Roof Strip
Default
4
15 A2 Angle A2
Default
6
16 40x40 End cap BOUGHT IN ITEM
40 x 40 x
20 11

3
PARTS LIST AND FIXINGS
ITEM
NO.
PART NO. DESCRIPTION
DIMENSIONS
(MM)
DIMENSIONS
(INCH)
IMAGE QTY.
1 S1 Frame 2000x1035 78.74x40.75 7
2 S3 Frame 2000x517 78.74x20.35 1
3 CB1 Bracket 110x110 4.33x4.33 7
4 JF1 Bracket 220x40 7.87x1.58 10
5 ST5 Roof Tie 1543x40x40 60.75x1.58x1.58 1
6 P1 Post 2000x1030 78.74x40.55 1
7 FT1 Foot Bracket 109x100x40 4.29x3.94x1.58 3
8 FT3 Foot Bracket 109x100x80 4.29x3.94x3.15 7
9 RB1 Bracket 110x42x40 4.33x1.81 12
10 R2 Rafter 2200x40x40 86.61x1.58x1.58 4
11 SS Sealing Strip Trim To 2200 Trim To 86.6 3 ROLLS
12 ACE2 Roof Panel 2210 x 1050 87 x 41.34 2
13 ACC2 Roof Panel 2210 x 1030 87 x 40.55 1
14 RC2 Roof Strip 2180 85.83 4
15 A2 Roof Angle 1035 x 50 x 50 40.55 x 1.97 x 1.97 6
16 EC40 Plastic End Cap 40x40 1.58x1.58 20
Fittings Bolt set M10 T25 BTANCM12100
M10 x 60mm Nut Washer
25 mm
Tech
screw
Black
Caps
M10/12 x 100 mm
Concrete Bolt
Pack C+D
33 33 66 202 66 11
Required 28 28 56 104 56 8
Image

3145
2110
83.07
123.82
MEASURE THE WIDTH
AND DEPTH
OF THE SHELTER TO
CHECK
CORRECT
ALIGNMENT.
CB1
JF1
S1
CB1
CB1CB1
Ensure correct corner
alignment
Step 1
Assemble S1 frames to make up the main structure using CB1 brackets
for the Corners and JF1 brackets for the straight joints.
4
BLUE DIMENSIONS - MM
GREEN DIMENSIONS - INCH

FT1
FT2
P1
ST5
CB1
JF1
S3
S3
P1
FT2
FT1
JF1
CB1
ST5
Step 2
Attach P1 post using a JF1 bracket then use two JF1 brackets to attach
S3 frame. The ST5 tie bar is mounted using a CB1 and a JF1 bracket.
Make sure the structure is square then move the shelter to its final
location before using the FT1 foot brackets to secure it to the ground.
5

R2
RB1
A
ENSURE
CORRECT
ALIGNMENT
OF RAFTERS
995
39.17
1035 1035 1035
40.748 40.748 40.748
SCALE - 1:20
Step 3
Attach R2 rafters using RB1 brackets.
6

ACE2
ACC2
ACE2
SS
ACE2
ACE2
ACC2
SS
Step 4
Stick sealing strips ( SS ) to the rafters. Align the ACE2 roof panels with the outer
roof rafters and equaly space the ACC2 panel in the middle.
7
Please note 25mm Tec Screws
are for roof panels only

A2
RC2
A2
RC2
Step 5
Screw down the RC2 directly into the rafter strips as shown below,
using 25mm Tech screws . Screw the A2 Angle onto the edges of the
roof as shown below.
8

3204 OR 126.14 TO FOOT HOLE CENTERS
1044.50 1035 1035
1044.50 1035
1084.50
477
1531.50
995 1035
3145 OR 123.82
39.17 40.75
60.30 18.78 42.70
41.12 40.75
40.75 40.75 41.12
11
PLAN VIEW
OVERALL DIMENSIONS AND GROUND FIXING POSITIONS
Suggested size for concrete base: 200mm OR 7.87in oversized
on all 4 sides.

Notes:
9

Notes:
10

12
MAINTENANCE:
To ensure your products give you many years of use we recommend that you:
THANK YOU
FOR PURCHASING THIS PRODUCT
Clean panels regularly with soapy water •
Ensure all fittings are tight (for example after a big storm) •
Touch up any exposed metal should it get scratched •
CONTACT DETAILS:
Email : [email protected]
Web : www.nobutts.com
Tel : [phone]
No Butts Bin Company, Inc. 16 Birch Lane, Madison, CT 06443
All Parts and Fixings checked by:
Print Name: Signature: