NordicTrack E480 User manual

Serial Number
Decal
Model No. NTIVEL70417.0
Serial No.
Write the serial number in the space
above for reference.
USER’S MANUAL
CAUTION
Read all precautions and
instructions in this manual
before using this equipment.
Keep this manual for future
reference.
CUSTOMER SERVICE
UNITED KINGDOM
Call: 0330 123 1045
From Ireland: 053 92 36102
Website: www.iconsupport.eu
E-mail: [email protected]
Write:
ICON Health & Fitness, Ltd.
Unit 1D, The Gateway
Fryers Way, Silkwood Park
OSSETT
WF5 9TJ
UNITED KINGDOM
www.iconeurope.com

2
IFIT and PROFORM are registered trademarks of ICON Health & Fitness, Inc. App Store is a trademark of Apple Inc.,
registered in the U.S. and other countries. Android and Google Play are trademarks of Google Inc. The BLUETOOTH®
word mark and logos are registered trademarks of Bluetooth SIG, Inc. and are used under license. IOS is a trademark
or registered trademark of Cisco in the U.S. and other countries and is used under license.
TABLE OF CONTENTS
WARNING DECAL PLACEMENT
WARNING DECAL PLACEMENT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT PRECAUTIONS ..................................................................3
BEFORE YOU BEGIN ........................................................................4
PART IDENTIFICATION CHART. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
ASSEMBLY ................................................................................6
HOW TO USE THE ELLIPTICAL ...............................................................11
CONSOLE FEATURES ......................................................................12
MAINTENANCE AND TROUBLESHOOTING .....................................................16
EXERCISE GUIDELINES .....................................................................16
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
EXPLODED DRAWING ......................................................................19
ORDERING REPLACEMENT PARTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
RECYCLING INFORMATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
TECNICHAL SPECIFICATIONS ....................................................... Back Cover
This drawing shows the location(s) of the warning decal(s). If
a decal is missing or illegible, see the front cover of this
manual and request a free replacement decal. Apply the
decal in the location shown. Note: The decal(s) may not be
shown at actual size.
115 Kg

3
IMPORTANT PRECAUTIONS
1. Before beginning any exercise program,
consult your physician. This is especially
important for persons over age 35 or
persons with pre-existing health problems.
2. Use the elliptical only as described in this
manual.
3. It is the responsibility of the owner to ensure
that all users of the elliptical are adequately
informed of all precautions.
4. The elliptical is intended for home use only.
Do not use the elliptical in a commercial,
rental, or institutional setting.
5. Keep the elliptical indoors, away from
moisture and dust. Place the elliptical on a
level surface, with a mat beneath it to protect
the oor or carpet. Make sure that there is at
least 3 ft. (0.9 m) of clearance in the front and
rear of the elliptical and 2 ft. (0.6 m) on each
side.
6. Inspect and properly tighten all parts
regularly. Replace any worn parts
immediately.
7. Keep children under age 12 and pets away
from the elliptical at all times.
8.The elliptical should not be used by persons
weigthing more than 264 lbs. (120 kg).
9. Wear appropriate clothes while exercising;
do not wear loose clothes that could become
caught on the elliptical. Always wear athletic
shoes for foot protection while exercising.
10. Hold the handlebars or the upper body
arms when mounting, dismounting, or using
the elliptical.
11. The pulse sensor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The pulse sensor is
intended only as an exercise aid in
determining heart rate trends in general.
12. The elliptical does not have a freewheel; the
pedals will continue to move until the
ywheel stops. Reduce your pedaling speed
in a controlled way.
13. Keep your back straight while using the
elliptical; do not arch your back.
14. Over exercising may result in serious injury
or death. If you feel faint or if you experience
pain while exercising, stop immediately and
cool down.
WARNING : To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your elliptical before using your elliptical. ICON
assumes no responsibility for personal injury or property damage sustained by or through the
use of this product.

4
BEFORE YOU BEGIN
Thank you for selecting the new NORDICTRACK E480
elliptical. The E480 elliptical provides a selection of fea-
tures designed to make your workouts at home more
effective and enjoyable.
For your benefit, read this manual carefully before you
use the elliptical. If you have questions after reading this
manual, please see the front cover of this manual. To help
us assist you, note the product model number and serial
number before contacting us. The model number and the
location of the serial number decal are shown on the front
cover of this manual.
Before reading further, please familiarize yourself with the
parts that are labeled in the drawing below.
Heart Rate Monitor
Upper Body Arm
Tablet Holder
Pedal Disc
Pedal
Wheel
Console
Leveling Foot
Handlebar

5
PART IDENTIFICATION CHART
Use the drawings below to identify the small parts needed for assembly. The number in each drawing is the key num-
ber of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity
needed for assembly. Note: If a part is not in the hardware kit, check to see whether it has been preassembled.

6
STEP 1
Install the Front bottom tube (2) and Rear bottom
tube (3) to the Main frame (1) with the Allen bolt
(17), Spring washer (18) and Arc washer (16) as
shown.
ASSEMBLY
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you nish all assembly steps.
• Left and right parts are marked “L” or “Left” and “R”
or “Right.”
• To identify small parts, see page 17
• As you assemble the exercice bike, use the draw-
ings below to identify small parts. The number in
parentheses below each drawing is the key number
of the part, from the PART LIST near the end of this
manual. The number following the parentheses is
the quantity needed for assembly.
• In addition to the included tool(s), assembly requires
the following tools:
• one adjustable wrench
• one Phillips screwdriver
• Note: If a part is not in the hardware kit, check to
see if it has been preassembled.
Go to www.iconservice.ca/CustomerService/
registration and register your product.
• activates your warranty
• saves you time if you ever need to contact
Customer Service
• allows us to notify you of upgrades and offers
Note: If you do not have internet access, call
Customer Service (see the front cover of this
manual) and register your product.

7
STEP 2
I. Sleeve the Mast cover (58) onto the Handlebar post (4);
II. Connect the Extension wire (50) with Sensor wire (57) properly at first, and then lock the Handlebar post (4)
onto the Main frame (1) with the Allen bolt (53), Spring washer (18) and Flat washer (12) as shown;
III. Sleeve down the Mast cover (58) and lock it tightly.

8
STEP 3
I. Insert the Long shaft (56) to the Handlebar post (4), attach the Swing tube (7L/R) on the Long shaft (56) with
Allen bolt (26), Spring washer (25), Flat washer (59),D-shape washer (24) and Wave washer (21). Not to tighten till
now.
II.Fix the Pedal support (8L/R) on the Crank (20) with Allen bolt (26), Spring washer (25), Flat washer (59),
D-shape washer (24) and Wave washer (21). Not to tighten till now.
III. Connect the Swing tube (7L/R) and Pedal support (8L/R) together with the bolt (37), Flat washer (38), Flat
washer (30) and Nylon nut (31) as shown. And then lock the above mentioned Allen bolt (26), Bolt (37) and Nylon
nut (31) tightly.
IV. Lock the Pedal (34L/R) on the Pedal support (8L/R) tightly with Bolt (33), Flat washer (12) .

9
STEP 4
Lock the Handlebar (6L/R) onto the Swing tube
(7L/R) tightly with Carriage bolt (44), Arc washer
(43) and Nylon nut (13).
Thread the Hand Pulse wire (55) into the hole of
Handlebar post (4) and then takes it out from the
computer bracket on top as shown.
Lock the fixed Handlebar (5) onto the Handlebar
post (4) tightly with the Allen bolt (53) and Spring
washer (18).
STEP 5
Fix the Protective guard (42A/B) onto the Swing
tube (7L/R) with the Tapping Screw (41);
Fix the Protective guard (36L/R) onto the con-
nection of Swing tube (7L/R) and Pedal support
(8L/R) with the Tapping Screw (35);
Fix the Protective guard (28a/b) onto the Pedal
tube joint (23L/R) with the Phillips Screw (27).

10
STEP 6
First, insert the Extension wire (50), Hand pulse wire (55) connect with the wire of Console (47) properly, then fix
the Console (47) on the bracket of the Handlebar post (4) with Phillips Screw (52) and Flat washer (77); Fix the
Tablet Holder support (15) on the console (47) with Phillips screw (61)
Lock the Protective guard (51a/b) on the Handlebar post (4) with the Tapping Screw (35) as shown.
Insert one side of Adapter (54) into the DC line (96) tail of elliptical, and another plug insert to power supply.
Note: Before using the machine, make sure all the screws are fasten tightly
Now your machine is ready for use.