Ogawa SMART VOGUE PLUS User manual

5569

Calves roller

NIGHT
FOR HER REFRESH
CIRCULATION
12
5
4
8
11
10
14
15
16
19
20
22
26
3
7
6
9
12
13
18
17
23
221
24
25

Product Operation Guide
Connect to the power supply,and turn the switch to "I" position,and the chair is
now in idle mode.
Note：Before use,make sure there is no person,pet or other object close to the
product,and make sure there is no foreign matter in the seams of the product.
Press on this button,the LCD backlight and ON/OFF button will be lit.Press any massage function button
to begin the chair`s massage functions.This will also start the timer.Press this button again to stop all
massage functions,and the massage rollers will return to their position.
Control Buttons for the Massage Chair
1 ON/OFF
The Start/Stop Control Button
When the chair is in mode and the user wants to temporarily pause it,press the Pause Button and all
massage function will stop.The "Pause" button will be blinking and the set time countdown will be
paused as well. Press the Pause button again to immediately cease the "Pause" function and resume
the original massage function,the countdown will continue.
2 Pause
Press once to activate the heating at waist. Press again to stop the function.
3 Heat
Press this button to activate the Time function. Every time this button is pressed,the time will change in
the sequence of 20 minutes>25 minutes>30 minutes>5 minutes>10 minutes>15 minutes>20 minutes in cycle.
4 Time

Product Operation Guide
These two control buttons can adjust the massage angle on the footrest. Press and hold the Footrest
Descends or Ascends control button,and the footrest will start to move;When the footrest reaches
the desired comfortable position,then loosen the button stop it.
Angle Adjustment Control Button for footrest
Auto Program
Press once to activate the Zero-G function. Press again to stop the function.
16 Zero Gravity
If the eight 1 of 7 auto program is activated, chair will automatically performing a shoulder height scan.
And the theme will go to shoulder adjustment automatically, user can manually adjust the shoulder height
position to the desire comfortable position before auto program start.
The following are the Auto program available:
12 /13 Footrest Descends/Ascends
These two control buttons can adjust the Back Ascends /Descends angle respectively.Press and hold the
Ascends /Descends control button to adjust the backrest and footrest to a desired comfortable position,
then loosen the button stop it.
Angle Adjustment Control Button for massage chair
14/15 Back Ascends /Descends
Press this button to activate the rhythmix kneading manual massage function for a full back massage at
medium strength.Every time this button is pressed,the manual massage function will change in the
sequence of Kneading>Tapping>Swedish>Clapping>Shiatsu>Stop.
Kneading,Tapping,Swedish,Clapping,Shiatsu
17 Manual
5 NIGHT
6 THAI
7 RECOVERY
8 FOR HIM
9 FOR HER
10 CIRCULATION
11 REFRESH

Product Operation Guide
After activating the Keading/Clapping/Tapping/Shiatsu/Rolling function,every time the button is pressed,
the speed can be adjusted to "Lv1>Lv2>Lv3" in one cycle.
The Speed Adjustment Button for Keading/Clapping/Tapping /Shiatsu--3 levels of speed to be adjust
18 Speed
After activating the Air-Pressure function(Auto and Manual),press this button to adjust the strength in the cycle.
The Strength Adjustment Button for Air-pressure-5 levels of intensity to be adjusted
19 Strength
After activating the tapping or clapping function,user can touch the button to adjust massage width,
total 3 level available (narrow,medium,wide).
Back massage width adjustment button-3 level available
20 Width
When the manual or automatic shoulder scanning can`t meet individual requirements，you manual fine
tune the shoulder height location by pressoing up/down button within sound 10 seconds.Once appropriate
location found release the key,the final positon will be lock.
Note:In the spot or partial massage, you can also use these two button to adjust the massage position.
21/22 Upward/Downward
After activating the Partial/Spot function, every time the button is pressed, the massage position can be
adjusted to "Full>Partial/Spot" in one cycle.
23 Partial /Spot
After activating the Air bag 1 function, every time the button is pressed, the air bag massage position
can be adjusted to "Full>OFF" in one cycle.
24 Air bag 1
After activating the Air bag 2 function, every time the button is pressed,the air bag massage position can be
adjusted to "Shoulder>Hand>Leg>Feet>OFF" in one cycle.
25 Air bag 2

Product Operation Guide
After activating the Foot Rollig function, every time the button is pressed,the foot rolling massage can be
adjusted to "Slow>Medium>Fast>OFF" in one cycle.
26 Foot Rolling
Play Mobile Music：Turn on bluetooth of mobile，then select bluetooth device of massage chair
（OGAWA-OG5569A-XXXXX）,after it Pair with massage chair speakers,it can be realized
through the massage chair play mobile music function.
Music Funtion

Product Operation Guide

120W
1400x765x1125mm
1680x765x1125mm
1435x795x1180mm
92
106