Version 1.1
Quick Installation Guide
ORing Industrial Networking Corp.
SWITCH
INDUSTRIAL
QIG www.oring-networking.com Quick Installation Guide
IES-1000 Series PRINTED ON RECYCLED PAPER
IES-1050R
Features
Dual redundant DC power inputs at terminal block
Support 100TX, 1000T, 100Base-FX and 1000BaseX ports
Very wide operating temperature range from -40 to 70 C
Rigid IP-30 housing design
DIN-Rail and panel mounting enabled
o
IES-1000 Series . IES-1000 series
IES-1000 Series
are unmanaged Ethernet switches support dual
redundant power inputs, relay output alarm, and rigid IP-30 housing. In addition, the
wide operating temperature range from -40 C to 70 C can satisfy most of operating
environment.
can be used in connecting several Ethernet devices like Ethernet
I/O, IP-Camera or other Ethernet switches. In addition, there are two different power
inputs at terminal block to avoid interruption caused by power down. When the
primary DC power input fails, the backup power input will take over immediately to
guarantee a non-stop operation.
oo
World's Fastest Recovery Time: < 10mS (O-Ring)
support the fastest 10mS redundant recovery time which make a non-stop
Ethernet connection. If your primary communication path is disconnected, the O-Ring
Technology switch the data to redundant path in the network. Its 10mS ultra fast
recovery time allows to provide a solid foundation of highly fault-tolerant
and easily-managed network.
IES-1050R
IES-1050R
Redundant Ring (<10mS): O-Ring
PLC
O-Ring
(<10mS)
IPC
Introduction
O-Ring Ethernet Redundant Technology
IES-1050R
IES-1050R
IES-1050R
Specifications
ORing Switch Model IES-1080 IES-1062GF-MM
IES-1062FX-MM IES-1062FX-SSIES-1062GT
10/100 Base-T(X) Ports in RJ45
Auto MDI/MDIX 8
Physical Ports
6666
100 Base-F(X) Multimode Port
(2KM,1310nm,SC connector)
-2---
100 Base-F(X) Singlemode Port
(30KM,13100nm,SC connector)
--2--
1000Base-SX Multimode Port
(550M,850nm,SC connector)
---2-
1000Base-LX Singlemode Port
(10KM,1310nm,SC connector)
----2
-----
Technology
Ethernet Standards
IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-T(X) and 100Base-FX,
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
LED indicators
Green: Power LED x3Power Indicator
Amber:IndicatePWR1orPWR2failure
10/100TX RJ45 Port Indicator
Fault Indicator
Fiber Port Indicator
Fault contact
Relay Relayoutputtocarrycapacityof1Aat24VDC
Power
Redundant Input power
Power consumption(Typ.)
Triple DC inputs. 12-48VDC on 7-pin terminal block, 12-45VDC on power jack
4Watts 6Watts
Overload current protection
Reverse polarity protection
Present
Present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension(WxDxH) 52(W)x106(D)x144(H) mm (2.05x4.17x5.67 inch.)
Weigh t (g)
Environmental
-40to85C(-40to185F)
oo
Storage Temperature
-40to70C(-40to158F)
oo
Operating Temperature
5% to 95% Non-condensingOperating Humidity
Regulatory approvals
FCC Part 15, CISPR (EN55022) class AEMI
EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
EMS
IEC60068-2-27Shock
IEC60068-2-32
IEC60068-2-6Vibration
EN60950
Safety
Free Fall
Warranty
5 years
IES-1062GF-MM
6
-
-
-
-
2
1000 Base-T Ports in RJ45
Auto MDI/MDIX
MAC Table 8192 MAC addresses
Processing Store-and-Forward
Green for port Link/Act. Amber for Duplex/Collision
GreenforportLink/Act.AmberforLink
7Watts 8Watts 8Watts 6Watts
666 g 685 g677 g 680 g 680 g 685 g
8-port /10-port Unmanaged Switches
IES-1082GP
8
-
-
-
-
-
7Watts
709 g
1000Base-X SFP Port ----- - 2
IES-1000 Series Industrial Unmanaged Switch
ORing Industrial Networking Corp.
Copyright© 2008 ORing
All rights reserved.
TEL: +886-2-2918-3036
FAX: +886-2-2918-3084
Website: www.oring-networking.com
ORing Switch Model IES-1080A IES-1042FX-MM
IES-1041FX-MM IES-1041FX-SSIES-1050A
10/100 Base-T(X) Ports in RJ45
Auto MDI/MDIX 8
Physical Ports
5444
100 Base-F(X) Multimode Port
(2KM,1310nm,SC connector)
-----
100 Base-F(X) Singlemode Port
(30KM,1310nm,SC connector)
--1-2
---1-
Technology
Ethernet Standards
IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-T(X) and 100Base-FX,
IEEE 802.3x for Flow control
LED indicators
Green: Power LED x2Power Indicator
Amber:IndicatePWR1orPWR2failure
10/100TX RJ45 Port Indicator
Fault Indicator
Fault contact
Relay Relayoutputtocarrycapacityof1Aat24VDC
Power
Redundant Input power
Power consumption(Typ.)
Dual DC inputs. 12-48VDC on 6-pin terminal block.
4Watts 7Watts
Overload current protection
Reverse polarity protection
Present
Present
Physical Characteristic
Enclosure IP-30
Dimension(WxDxH) 26.1(W)x95(D) x 144.3(H) mm (1.30 x 3.74 x 5.68 inch.)
Weigh t (g)
Environmental
-40to85C(-40to185F)
oo
Storage Temperature
-40to70C(-40to158F)
oo
Operating Temperature
5% to 95% Non-condensingOperating Humidity
Regulatory approvals
FCC Part 15, CISPR (EN55022) class AEMI
EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
EMS
IEC60068-2-27Shock
IEC60068-2-32
IEC60068-2-6Vibration
EN60950
Safety
Free Fall
Warranty
5 years
IES-1042FX-SS
4
-
-
2
1000 Base-T Ports in RJ45
Auto MDI/MDIX
MAC Table 2048 MAC addresses
Processing Store-and-Forward
Green for port Link/Act. for Duplex/CollisionAmber
3.5 Watts 5 Watts
391 g 395 g
5-port / 6-port /8-port Unmanaged Switches (Slim Type)
ORing Switch Model IES-1050 IES-1050R
10/100 Base-T(X) Ports in RJ45
Auto MDI/MDIX 5
Physical Ports
5
Technology
Ethernet Standards
IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-T(X) and 100Base-FX,
IEEE 802.3x for Flow control
LED indicators
Green: Power LED x1Power/Readyindicator
Amber:IndicatesystemoperatedinO-RingMastermode
10/100TX RJ45 Port Indicator
R.M. Indicator
Power
Input power
Power consumption(Typ.)
9~ 30 VDC voltage power input at 3-pin terminal block
3Watts
Overload current protection
Reversepolarityprotection
Present
Present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 88(W) x 102(D) x 24(H)mm (3.46 x 4.0 x 0.94 inch.)
Weigh t (g)
Environmental
-40to85C(-40to185F)
oo
Storage Temperature
-10to60C(14to140F)
Extended temperature model
(-40to70 C,-40to158 F,-Tmodel)
oo
oo
Operating Temperature
5% to 95% Non-condensingOperating Humidity
Regulatory approvals
FCC Part 15, CISPR (EN55022) class AEMI
EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
EMS
IEC60068-2-27Shock
IEC60068-2-32
IEC60068-2-6Vibration
EN60950
Safety
Free Fall
Warranty
5 years
MAC Table
Processing Store-and-Forward
Green for port Link/Act. for duplex indicatorAmber
305 g 308 g
5-port Unmanaged Switches
2048 MAC addresses
Network Redundancy O-Ringwithrecoverytimelessthan10msover250units
-
-
Amber:IndicateportoperatedinO-Ringmode
O-Ring indicator -
-40 to 70 C (-40 to 158 F)
oo
1000Base-SX Multimode Port
(550M,850nm,SC connector)
1000Base-LX Singlemode Port
(10KM,1310nm,SC connector)
1000Base-X SFP Port
-----
-----
-----
-
-
-
Fiber Port Indicator
100 Base-F(X) Multimode Port
(2KM,1310nm,SC connector)
100 Base-F(X) Singlemode Port
(30KM,1310nm,SC connector)
1000 Base-T Ports in RJ45
Auto MDI/MDIX
1000Base-SX Multimode Port
(550M,850nm,SC connector)
1000Base-LX Singlemode Port
(10KM,1310nm,SC connector)
1000Base-X SFP Port
- -
- -
- -
- -
- -
- -
Network Redundancy -
Fault Indicator -
Fiber Port Indicator -
Fault contact
Relay -
R.M. Indicator -
O-Ring indicator -
-
Network Redundancy -
R.M. Indicator -
O-Ring indicator -
7 Watts5Watts
390 g 395 g 406 g406 g
-
-Green for port Link/Act.
Green for port Link/Act.