ORiNG IPS-2042TX Series User manual

Version 1.2
Quick Installation Guide
ORing Industrial Networking Corp.
SWITCH
INDUSTRIAL
QIG www.oring-networking.com Quick Installation Guide
IPS Series PRINTED ON RECYCLED PAPER
Features
World’s fastest Redundant Ethernet Ring: O-Ring (recovery time < 10ms over 250
units of connection)
Open-Ring support the other vendor’s ring technology in open architecture
O-RSTP support applications with complex topology
STP/RSTP/MSTP supported
IGMP snooping for filtering multicast traffic
Port Trunking for easy of bandwidth management
SNMP v1/v2c/v3 support for secured network management
RMON for traffic monitoring
Supports DDM (Digital Diagnostic Monitoring) function
Event notification through Syslog, Email, SNMP trap, and Relay Output
Port lock to prevent access from unauthorized MAC address
Windows utility (Open-Vision) support centralized management and configurable
by Web-based, Telnet, Console, CLI
Very wide operating temperature range from -40 to 70 C
Rigid IP-30 housing design
DIN-Rail and panel mounting enabled
Support PTP Client (Precision Time Protocol) clock synchronization
o
Specifications
ORing Switch Model IPS-2042TX IPS-2042FX-MM
10/100 Base-T(X) Ports in RJ45
Auto MDI/MDIX with PSE 4
Physical Ports
4
100 Base-F(X) Multimode Port
(2KM,1310nm,SC connector)
2 -
100 Base-F(X) Singlemode Port
(30KM,13100nm,SC connector)
- 2
Gigabit combo in RJ-45 and SFP
- -
- -
Technology
Ethernet Standards
IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-T(X) and 100Base-FX,
IEEE 802.3x for Flow control,
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol),
IEEE 802.3af PoE specification (up to 25 Watts per port for PSE)
LED indicators
Green: Power LED x3, Green: PoE LED x4Power/PoE I ndicator
Amber: Indicate event occurredunexpected
10/100 Base-T(X)
Indicator
RJ45 Port
Fault Indicator
Fiber Port Indicator
Fault contact
Relay Relayoutputtocarrycapacityof1Aat24VDC
Power
Redundant Input power
Power consumption(Typ.)
Triple DC inputs. Dual 48VDC on 7-pin terminal block, 48VDC on power jack
5Watts 7Watts
Overload current protection
Reverse polarity protection
Present
Present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension(WxDxH) 52(W)x106(D)x144(H) mm (2.05x4.17x5.67 inch.)
Weigh t (g)
Environmental
-40to85C(-40to185F)
oo
Storage Temperature
IPS-2042FX-SS
4
-
-
2
-
MAC Table 2048 MAC addresses
GreenforportLink/Act.AmberforLink
GreenforportLink/Act.AmberforLink
7Watts
696 g 709 g
709 g
IPS-2000 Series
IPS Series
Industrial PoE Ethernet Switch
Environmental
-40to85C(-40to185F)
oo
Storage Temperature
Operating Temperature
5% to 95% Non-condensingOperating Humidity
Regulatory approvals
FCC Part 15, CISPR (EN55022) class AEMI
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS),
EN61000-4-8, EN61000-4-11
EMS
IEC60068-2-27Shock
IEC60068-2-32
IEC60068-2-6Vibration
EN60950-1 Safety
Free Fall
Warranty
5 years
-40to70C(-40to158F)
oo
O-Ring indicator
Priority Queues 4
Processing Store-and-Forward
Switch Properties Switch bandwidth: 1.0Gbps
VLANs: Port Based
Security Features Enable/disable ports,
VLAN to segregate and secure network traffic
Software Features
STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units
Port configuration, status, statistics, monitoring, security
Network Redundancy O-Ring, STP,RSTP
-40to70C(-40to158F)
oo
Operating Temperature
5% to 95% Non-condensingOperating Humidity
Regulatory approvals
FCC Part 15, CISPR (EN55022) class AEMI
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS),
EN61000-4-8, EN61000-4-11
EMS
Green:FlashingtoindicatesystemoperatedinO-RingMastermodeR.M. Indicator
Green:IndicatesystemoperatedinO-Ringmode
IEC60068-2-27Shock
IEC60068-2-32
IEC60068-2-6Vibration
EN60950 Safety
Free Fall
Warranty
5 years
Ethernet Standards
IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-T(X) and 100Base-FX,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
IEEE 802.3x for Flow control,
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1p for COS (Class of service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
IEEE 802.1x for Authentication,
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
IEEE802.3afPoEspecification(upto15.4WattsperportforPSE)
LED indicators
Green: Power LED x3, Green: PoE LED x8Power/PoE I ndicator
MAC Table 8192 MAC addresses
Amber: Indicate event occurredunexpected
10/100 Base-T(X)
Indicator
RJ45 Port
Fault Indicator
1000Base-X SFP Port Indicator
Fault contact
Relay Relayoutputtocarrycapacityof1Aat24VDC
Power
Redundant Input power
Power consumption(Typ.)
Overload current protection
Reverse polarity protection
Present
NOT Present
Physical Characteristic
Enclosure IP-30
Dimension(WxDxH)
Weigh t (g)
Green for port Link/Act. Amber for Duplex/Collision
Green for port Link/Act.
9 Watts (power consumption of PSE not included)
1100 g
RS-232 Serial Console Port
Priority Queues 4
Processing Store-and-Forward
Switch Properties
Switch latency: 7 us
Switch bandwidth: 5.6Gbps
Max. Number of Available VLANs: 4096
IGMP multicast groups: 1024
Port rate limiting: User Define
Security Features
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1q) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Software Features
STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging and GVRP supported
PTP Client (
IGMP Snooping for multicast filtering
Port configuration, status, statistics, monitoring, security
Precision Time Protocol) clock synchronizing function
Network Redundancy O-Ring, Open-Ring, O-RSTP,STP, RSTP,MSTP
RS-232in RJ45 connector with console cable. Baud rate setting: 9600bps, 8, N, 1
Green:IndicatesystemoperatedinO-RingmodeR.M. Indicator
Dual DC input 48VDC on 6-pin terminal block
74.3(W)x109.2(D)x153.6(H) mm (2.93x4.3x6.05 inch.)
ORing Industrial Networking Corp.
Copyright© 2008 ORing
All rights reserved.
TEL: [phone]
FAX: [phone]
Website: www.oring-networking.com
E-mail: [email protected]
is designed for rugged environment, especially in the applications of
are with manageable Redundant Ring. It contains the
interface of 10/100TX, or 100Base-FX, or 1000TX, or 1000BaseX ports, or 1000
Combo ports. All these switches can protect your mission-critical applications from
network interruptions or temporary malfunctions with its maximum 10mS ultra fast
recovery time. These models also support functions of network management, such
as SNMP, RMON and Port/Tag-based VLAN security.
can be configured smartly by web browser, Telnet, CLI, and windows
utility. Network administrators can determine to send event notifications through
email, SNMP trap, or relay output. To enhance the security, port access can be
limited to pre-defined IP address table, as well as segment ports into different
VLANs, or filtering multicast traffic by IGMP Snooping.
support Power over Ethernet, a system to transmit electrical power
and data to remote device over standard twisted-pair cable in an Ethernet network.
Each switch has 4X10/100TX or 8X10/100TX PSE (Power Sourcing Equipment)
ports. PSE is a device (switch or hub for instance) that will provide power in a PoE
setup. can be managed centralized and convenient by powerful
windows utility-Open-Vision. The wide operating temperature range
Network Management and Remotely Configuring
IPS Series
IPS Series
IPS Series
IPS Series
IPS Series
IPS Series
facility management, sewage treatment, power utility, telecommunication,
transportation and all other mission-critical applications that require reliable Ethernet
connectivity.
-40 C to 70 C
can satisfy most of operating environment. Therefore, are one of the
most reliable choice for highly-managed and Fiber Ethernet application.
oo
Introduction
10/100 Base-T(X) Ports in RJ45
Auto MDI/MDIX without PSE
IPS-3082GC
ORing Switch Model IPS-3082GC
10/100 Base-T(X) Ports in RJ45
Auto MDI/MDIX with PSE
Physical Ports
8
100 Base-F(X) Multimode Port
(2KM,1310nm,SC connector)
-
100 Base-F(X) Singlemode Port
(30KM,13100nm,SC connector)
-
Gigabit combo in RJ-45 and SFP
-
2
Technology
10/100 Base-T(X) Ports in RJ45
Auto MDI/MDIX without PSE
ORing’s switches are intelligent switches. Different from other traditional redundant switches,
ORing provides a set of Windows utility (Open-Vision) for user to manage for user to monitor all
of industrial Ethernet switches on the industrial network.
Redundant Ring (<10mS): O-Ring
O-Ring Ethernet Redundant Technology
Topology View
Monitoring and Configuration interface
PoE
DDM function (IPS-3082GC Only)

10/100M
IPS-3082GC
G2
P1
P3
P5
P1
P3
P2
P4
P6
P8
Fault
P7
G1
7
56
8
P.O.E.
3
12
4
G2 G1 LNK/ACT
IPS-2042FX
P6
P5
3
1 2
4
P.O.E.
IPS-2042TX
P6
P5
3
1 2
4
P.O.E.
Front Panel Accessory
Wall-mounted kit
145mm DIN-Rail kit
2Flat Screw (M3 X5)
37-Pin Terminal block
4
Dust Cover (RJ-45)
6
QIG www.oring-networking.com Quick Installation Guide
Dust Cover (SFP)
7
6-Pin Terminal block
5
PRINTED ON RECYCLED PAPER
Installation
IPS-2000 Series
IPS-3082GC
DIN-Rail Install Step
DIN-Rail Install Step Wall-mounted Install Step
Wall-mounted Install Step
QIG
9
Power Connection Guide
Frame Ground
Power-3 48VDC
IPS-2000 Series
IPS 2000 Series
Non-Fiber Product
Fiber ACT LEDLNK/
Serial Console
Port
Fiber Product
No.6 Fiber Port
A B
(Managed Switch Only,
9600 bps, 8N1)
LNK/ACT LED
LNK/ACT LED
(Green)
LAN Port
LINK LED
(Amber)
No.6 LAN Port
No.5 LAN Port
Power1 LED
Power 3 LED
Ring Enabled LED
Ring Master LED
Fault LED
Power 2 LED
LNK/ACT LED
(Green)
10/100 Base-T(X)
LAN Port
Full Duplex LED
(Amber)
SFP 1000Base-X Fiber
Port
10/100/1000 Base-T Port
No.1 / 2 Giga Fiber Port
ACT LEDLNK /
C
Console Cable
11 66mm DIN-Rail kit
12
Wall-mounted kit
10
CD
8
www.oring-networking.com
ORing ToolsCD
Ver 1.0
O
Ri
n
g
Industrial 6-port lite-managed PoE Ethernet switch
with 4x10/100Base-T(X) P.S.E. and 2x100Base-FX,
multi-mode
Industrial 6-port lite-managed PoE Ethernet switch
with 4x10/100Base-T(X) P.S.E. and 2x100Base-FX,
single-mode
Industrial 6-port lite-managed PoE Ethernet switch
with 4x10/100Base-T(X) P.S.E. and 2x10/100Base-T(X)
B
B
A
C
1X1, 2X1, 3X6, 4X1,
IPS-2042FX-MM
IPS-2042FX-SS
IPS-2042TX
Industrial 10-port managed PoE Ethernet Switch with
8x10/100Base-T(X) P.S.E. and 2xGigabit combo ports,
SFP socket
Model name Model Description Accessory
Front Panel
IPS-3082GC
Packing list
P5
6X6,
8X1, 9X1
1X1, 2X1, 3X6, 4X1, 6X4,
8X1, 9X1
1X1, 2X1, 3X6, 4X1, 6X4,
8X1, 9X1
Reset Button
3X6, 5X1, 6X10, 7X2,
8X1, 9X1, 10 X2, 11 X1,12 X1
Frame Ground
Power
Supply
48 VDC
V-
V+
V-
V+
Power
Supply
48 VDC
PWR-1PWR-2
1A@24V
DC 48V
V2-V2+ V1-V1+
Fault
Warning
Device
GND+24V
Power
Supply
IPS-3082GC
IPS-3082GC
Version 1.2
Quick Installation Guide
ORing Industrial Networking Corp.
SWITCH
INDUSTRIAL
IPS Series
Industrial PoE Ethernet Switch
PoE
PoE LED
Power 1 LED
Power LED
Ring Master LED
Fault LED
Power 2 LED
PoE LED
Power
Supply
48 VDC
V-
V+
Warning
Device
GND+24V
V-
V+
Power
Supply
48 VDC
Power
Supply
PWR-3 48VDC
-
+
IPS Series
No.5 Fiber Port