ParaBody 884 User manual

1
884 SAFETY RAILATTACHMENT
CLASSH
PART # 7082201
REV. B Revision: 07/31/01
USER’S GUIDE
WARNING:
Read and follow all directions
for each step to insure proper
assembly of this product.
Version: 884107

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF
EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!
1. Before using, read all the warnings and instructions
on the use of this machine. Use only for intended
exercise. DO NOT modify the machine.
2. Obtain a medical exam before beginning any
exercise program.
3. Keep body and clothing free of all moving objects.
4. Inspect the machine before use. DO NOT use it if it
appears damaged. DO NOT attempt to fix a broken or
j
ammed machine. Notify your authorized ParaBody
dealer before use and have repairs made by an
authorized service technician.
5. Be certain that weight pin is completely inserted.
Use only the pin provided by the manufacturer. If
unsure, call your authorized ParaBody dealer.
6. Never pin the weights or prop plate into an elevated
position. DO NOT use the machine if found in this
condition. DO NOT attempt to fix. Notify your
authorized ParaBody dealer.
7. Inspect cables and their connections before using
machine. Pay particular attention to the cable ends.
DO NOT attempt to fix. Notify your authorized
ParaBody dealer before use and have repairs made by
an authorized service technician.
8. Make sure all spring loaded pull pins are fully
engaged in the adjustment position and fully tighten
thumbscrew before use.
9. Children must not be allowed near this machine.
Supervise teenagers.
.
IMPORTANT SAFETY INFORMATION
TABLE OF CONTENTS
Safety Statement.............2
General Notes..................2
Parts list...........................3
Assembly Instructions..... 3-5
NOTE: In a continual effort to improve our products, specifications are subject to change
2001 Life Fitness, a division of Brunswick Corporation. All rights reserved.
ParaBody is a trademark of Brunswick Corporation
www.parabody.com 2
General Maintenance.......6
Warranty Statement..........7
Product Services..............8
Insert-Registration Card
©
IMPORTANT NOTES
Please note:
* Thank you for purchasing the ParaBody 884 Safety RailAttachment. Please read these
instructions thoroughly and keep them for future reference. This product must be assembled
on a flat, level surface to assure its proper function.
* This product must be assembled on a flat, level surface to assure its proper function. DO NOT
securely tighten any frame connections until the entire frame has been assembled, unless
otherwise stated.

3
PARTS LIST
PART #
6807602
6807702
6824601
6811701
KEY
1
2
3
4
QTY
1
1
6
2
DESCRIPTION
LEFT SAFTEY RAIL
RIGHT SAFETY RAIL
3-1/4 X 1-3/4” GLIDE
13-1/2 X 1-5/8” RUBBER STRIP
FIGURE 1
STEP 1:
• Attach six 3-1/4 X 1-3/4” GLIDES (3) to the LEFT & RIGHT SAFETY RAILS (1 & 2) as shown in FIGURE 1, using the
following steps:
• Thoroughly clean all surfaces where the 3-1/4 X 1-3/4” GLIDES (3) are to be attached.
• Remove the 3-1/4 X 1-3/4” GLIDES (3) from the paper backing and firmly apply them to all shown surfaces.
2
3
1

4
FIGURE 2
STEP 2:
• Attach two 13-1/2 X 1-5/8” RUBBER STRIPS (4) to the LEFT & RIGHT SAFETY RAILS (1 & 2) as shown in FIGURE
2,
2
4
1
0123456
1/2 1/2 1/2 1/2 1/2 1/2

5
FIGURE 3
STEP 3:
• Assemble the LEFT & RIGHT SAFETY RAILS (1 & 2) to the UPRIGHT FRAMES as shown in FIGURE 3.
2
1
2
UPRIGHT
FRAME