ParaBody Leg Hold Down 823101 User manual

823101
LEG HOLD DOWN
PRODUCT ASSEMBLY
INSTRUCTIONS SHEETS
104/11197

823101 LEG HOLD DOWNASSEMBLY PARTS LIST
SORT AND COUNT ALL PARTS BEFORE BEGINNING ASSEMBLY
HARDWARE:
ITEM NAME/DESCRIPTION QTY
3/4IN.STARLOCKCOLLAR............................................................................................ 4
1-3/4IN.SQ.ENDCAP...................................................................................................... 2
WELDMENTS/PARTS:
ITEM NAME/DESCRIPTION QTY
LEGHOLDDOWNFRAMEWLDMT....................... (6416001)...................................... 1
ROLLERPADSHAFT................................................ (6125101)...................................... 2
ROLLERPAD............................................................. (6.194601)...................................... 4
NOTE: BOLT LENGTH IS MEASUREDFROM THE UNDERSIDE OF THE HEAD OF THE BOLT.
,~iiiiiiii
IBOLTLEI~IGTH I
BOLT LENGTH RULER:
112 ] 1/2 [ 1/2 [ 1/2 ] 1/2 [ "~1/2 [
1 2 3 I 4 I 5 6
2 04/11/97

823101 LEG HOLDDOWNASSEMBLYINSTRUCTIONS
o
Insert two (2) 1-3/4 IN. SQ. ENDCAPinto both ends of the LEGHOLDDOWNFRAMEas shown
drawing.
Assemble four (4) ROLLERPADSto the LEGHOLDDOWNFRAMEas st~own on drawing, using
two (2) ROLLERPADSHAFTS,and four (4) 3/4 IN. STARLOCKCOLLAR~L
To perform DECLINESor AB CRUNCHES,insert the LEG HOLDDOWNASSEMBLYinto the
UPRIGHTTUBEof the BENCHFRAMEas shown on drawing, and tighten in place using the
THUMBSCREW.To adjust the SEATPADfor the DECLINEposition, pull out on4he U-PIN. Rotate
the U-PINback pass the FIRSTPINSTOP.Release the U-PIN,and allow it to rest up against the
SECONDPIN STOP.
304/11/97