manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Parker
  6. •
  7. Measuring Instrument
  8. •
  9. Parker RK 11-1669 User manual

Parker RK 11-1669 User manual

RK 11-1669
T-handle Vacuum Gauge Kit
For 900 and 1000 Turbine Series Filters
Contact Information:
Parker Hannin Corporation
Racor Division
P.O. Box 3208
3400 Finch Road
Modesto, CA 95353
phone 800 344 3286
209 521 7860
fax 209 529 3278
racor@parker.com
www.parker.com/racor
www.parker.com/racorproducts
Overview:
T-handle vacuum gauges available
to monitor filter condition. As a
filter slowly becomes clogged with
contaminates, restriction (resistance
to flow) increases. Because of this
restriction, more air is mixed with
fuel and less fuel is delivered to the
engine (fuel de-gassing). This will
result in loss of power and eventually
stall the engine.
Installing a T-handle Vacuum Gauge
in your fuel system gives you a
visual monitor of your filter condition.
Excessive resistance on the gauge
means it’s time to change the filter.
Instruction Part Number 14396 Rev -
Product Features:
• Rotatable bezel ring to set
the change-out line.
• 1/4"NPT threads.
• 9/16"-18 UNF tting
included.
• Red tell-tale pointer follows
black restriction pointer
to highest reading. Reset,
using center knob.
• Black restriction pointer.
Specifications
Application For 900 and 1000 Filter Assemblies
Thread Size 1/4” NPT bottom boss mount
Fitting Thread 9/16”-18 UNF
Dimensions 2.0” W x 1.1” D
Dial 2 in. (5.1 cm)
Weight (dry) 0.3 lb (0.1 kg)
Ambient Temperature Range -40oto +250oF (-40oto +121oC)
Special Notes: For severe vibration applications, mount gauge on a stable, remote location and
connect to the source using exible tubing. After September 1999, Racor converted many liquid-
lled gauges to new silicone dampened movement. This new (dry) technology provides a vibration
resistant design that never leaks uid or requires adjustments due to temperature or altitude
variations.
RK 11-1669 Overview
It is recommended to remove
any dirt or debris from the filters
lid before installation.
1. Remove existing T-handle.
2. Attach vacuum gauge to
adapter fitting (if not already
done) using a thread sealant.
Note: Do not use thread tapes as
loose particles may work out and
flow into the fuel system.
3. Apply Parker Supper O-lube
(part number RK 31605) or
clean motor oil onto o-ring.
4. Install O-ring (part number
11350) carefully onto adapter.
5. Install the gauge adapter
assembly into the top of lid
Hand Tight. You may need
to orient gauge within the
adapter body to face the
appropriate direction.
Installation Guidelines
Service Instructions
e actual reading at which you
should change the lter will
depend on many factors as fuel
systems vary so greatly.
As a rule, many pumps have
trouble delivering fuel to the
engine when restriction reaches
7"-10" of mercury (inHg). Some
falter much earlier, some later.
Carry an extra Racor lter (or two)
and at the rst indication of power
loss -usually at high RPMs- pull
over and note the gauge reading.
is should provide an idea when
future service is needed. Replace
dirty lter with a new Racor lter
at the earliest opportunity.
Note: Do not use this kit
for USCG inspected marine
applications: Order Kit
number 1606B for dash-
mounted gauge.
Mounting Information
RK 11-1676E Vacuum Gauge
Center Reset Knob
1/4"NPT Threads
Rotating bezel ring to set the red
change-out line.
11-1668 Fitting
9/16"-18 UNF Threads
11350 T-handle o-ring
Black Restriction Pointer
1.0 in.
(2.6 cm)
November 2008© 2008 Parker Hannin Corporation
All products manufactured
or distributed by Racor are
subject to the following, and
only the following, LIMITED
EXPRESS WARRANTIES, and
no others: For a period of
one (1) year from and after
the date of purchase of a new
Racor product, Racor warrants
and guarantees only to the
original purchaser-user that
such a product shall be free
from defects of materials
and workmanship in the
manufacturing process. The
warranty period for pumps and
motors is specifically limited
to ninety (90) days from date of
purchase. A product claimed to
be defective must be returned
to the place of purchase. Racor,
at its sole option, shall replace
the defective product with a
comparable new product or
repair the defective product.
This express warranty shall be
inapplicable to any product not
properly installed and properly
used by the purchaser-user
or to any product damaged or
impaired by external forces.
THIS IS THE EXTENT OF
WARRANTIES AVAILABLE
ON THIS PRODUCT. RACOR
SHALL HAVE NO LIABILITY
WHATSOEVER FOR
CONSEQUENTIAL DAMAGES
FLOWING FROM THE USE OF
ANY DEFECTIVE PRODUCT
OR BY REASON OF THE
FAILURE OF ANY PRODUCT.
RACOR SPECIFICALLY
DISAVOWS ALL OTHER
WARRANTIES, EXPRESS
OR IMPLIED INCLUDING,
WITHOUT LIMITATION, ALL
WARRANTIES OF FITNESS
FOR A PARTICULAR PURPOSE
(EXCEPT FOR THOSE WHICH
APPLY TO PRODUCT OR
PART THEREOF THAT IS
USED OR BOUGHT FOR USE
PRIMARILY FOR PERSONAL,
FAMILY, OR HOUSEHOLD
PURPOSES), WARRANTIES OF
DESCRIPTION, WARRANTIES
OF MERCHANTABILITY,
TRADE USAGE OR
WARRANTIES OR TRADE
USAGE.
Warning
Failure or improper selection
or improper use of the
products and/or systems
described herein or related
items can cause death,
personal injury and property
damage. This document and
other information from Parker
Hannifin Corporation, its
subsidiaries and authorized
distributors provide product
and/or system options for
further investigation by users
having technical expertise.
It is important that you
analyze all aspects of your
application and review the
information concerning the
product or system in the
current product catalog. Due
to the variety of operating
conditions and applications
for these products or systems,
the user, through its own
analysis and testing, is solely
responsible for making the
final selection of the products
and systems and assuring that
all performance, safety and
warning requirements of the
applications are met.
The products described
herein, including with
limitation, product features,
specifications, designs,
availability and pricing, are
subject to change by Parker
Hannifin Corporation and
its subsidiaries at any time
without notice.
The following statement
is required pursuant to
proposition 65, applicable
in the State of California:
‘This product may contain a
chemical known to the State of
California to cause cancer or
reproductive toxicity’.
Limited Warranties Statement

Other Parker Measuring Instrument manuals

Parker BD15 Series Installation and maintenance instructions

Parker

Parker BD15 Series Installation and maintenance instructions

Parker Serviceman Plus User manual

Parker

Parker Serviceman Plus User manual

Parker 023-064 Series User manual

Parker

Parker 023-064 Series User manual

Parker ChemTec II Assembly instructions

Parker

Parker ChemTec II Assembly instructions

Parker DIGI+ User manual

Parker

Parker DIGI+ User manual

Parker icountACM202024 User manual

Parker

Parker icountACM202024 User manual

Parker OSP-P User manual

Parker

Parker OSP-P User manual

Parker Digital MXR-D 4065D User manual

Parker

Parker Digital MXR-D 4065D User manual

Parker SciLog SciTemp Guide

Parker

Parker SciLog SciTemp Guide

Parker Service Master COMPACT User manual

Parker

Parker Service Master COMPACT User manual

Parker SensoControl ServiceJunior User manual

Parker

Parker SensoControl ServiceJunior User manual

Parker Service Master CONNECT User manual

Parker

Parker Service Master CONNECT User manual

Parker SensoControl Serviceman SCM-150 Series User manual

Parker

Parker SensoControl Serviceman SCM-150 Series User manual

Parker Racor RK30880E User manual

Parker

Parker Racor RK30880E User manual

Parker Porter F65 User manual

Parker

Parker Porter F65 User manual

Parker FTIR3 User manual

Parker

Parker FTIR3 User manual

Parker PFM1 Series User manual

Parker

Parker PFM1 Series User manual

Parker SciPres II Assembly instructions

Parker

Parker SciPres II Assembly instructions

Parker SensoControl Serviceman SCM-150-1-01 Installation guide

Parker

Parker SensoControl Serviceman SCM-150-1-01 Installation guide

Parker C3000 Instruction Manual

Parker

Parker C3000 Instruction Manual

Parker XRF User manual

Parker

Parker XRF User manual

Parker ServiceJunior SCJN Series User manual

Parker

Parker ServiceJunior SCJN Series User manual

Parker PMS User manual

Parker

Parker PMS User manual

Parker DPIT1 VS08MDC1 Series User manual

Parker

Parker DPIT1 VS08MDC1 Series User manual

Popular Measuring Instrument manuals by other brands

Radiant GEIGER PRO manual

Radiant

Radiant GEIGER PRO manual

Microsensor MPM380 Operation manual

Microsensor

Microsensor MPM380 Operation manual

Omntec FuelCheck Installation & operating manual

Omntec

Omntec FuelCheck Installation & operating manual

Hameg HM5014-2 manual

Hameg

Hameg HM5014-2 manual

Sekonic Flashmate L-308S operating manual

Sekonic

Sekonic Flashmate L-308S operating manual

General MMD5NP user manual

General

General MMD5NP user manual

tecan Freedom EVO-2 Service manual

tecan

tecan Freedom EVO-2 Service manual

Solinst 401 Assembly manual

Solinst

Solinst 401 Assembly manual

Omega FPR310 Series user guide

Omega

Omega FPR310 Series user guide

Rae ToxiRAE Pro user guide

Rae

Rae ToxiRAE Pro user guide

AISWEI AiCom Quick installation guide

AISWEI

AISWEI AiCom Quick installation guide

Siemens Sitrans LR200 Quick start manual

Siemens

Siemens Sitrans LR200 Quick start manual

SensorLink Ampstik+ Operator's manual

SensorLink

SensorLink Ampstik+ Operator's manual

Danfoss PFM 5001 user guide

Danfoss

Danfoss PFM 5001 user guide

Circutor DM45 AD manual

Circutor

Circutor DM45 AD manual

LINSHANG LS195 user manual

LINSHANG

LINSHANG LS195 user manual

Emerson Rosemount 8600D Series quick start guide

Emerson

Emerson Rosemount 8600D Series quick start guide

GoodMeasure EDMI MK7A installation guide

GoodMeasure

GoodMeasure EDMI MK7A installation guide

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.