Phoenix Contact UM EN PROFICLOUD User manual

User manual
Startup and operation of hard-
ware and software components of
the PROFICLOUD

2016-05-24
PHOENIX CONTACT 106496_en_02
Startup and operation of hardware and software components of the
PROFICLOUD
UM EN PROFICLOUD
02
—
Designation Revision Order No.
AXC CLOUD-PRO 00 2402985
CLOUD COUPLER-PRO 00 2402990
User manual
Designation:
Revision:
Order No.:
This user manual is valid for:

PHOENIX CONTACT
Please observe the following notes
User group of this manual
The use of products described in this manual is oriented exclusively to:
– Qualified electricians or persons instructed by them, who are familiar with applicable
standards and other regulations regarding electrical engineering and, in particular, the
relevant safety concepts.
– Qualified application programmers and software engineers, who are familiar with the
safety concepts of automation technology and applicable standards.
Explanation of symbols used and signal words
How to contact us
Internet Up-to-date information on Phoenix Contact products and our Terms and Conditions can be
found on the Internet at:
phoenixcontact.com
Make sure you always use the latest documentation.
It can be downloaded at:
phoenixcontact.net/products
Subsidiaries If there are any problems that cannot be solved using the documentation, please contact
your Phoenix Contact subsidiary.
Subsidiary contact information is available at phoenixcontact.com.
Published by PHOENIX CONTACT GmbH & Co. KG
Flachsmarktstraße 8
32825 Blomberg
GERMANY
Should you have any suggestions or recommendations for improvement of the contents and
layout of our manuals, please send your comments to:
[e-mail]
This is the safety alert symbol. It is used to alert you to potential personal injury
hazards. Obey all safety measures that follow this symbol to avoid possible
injury or death.
There are three different categories of personal injury that are indicated with a
signal word.
DANGER This indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING This indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION This indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
This symbol together with the signal word NOTE and the accompanying text
alert the reader to a situation which may cause damage or malfunction to the
device, hardware/software, or surrounding property.
This symbol and the accompanying text provide the reader with additional
information or refer to detailed sources of information.

Please observe the following notes
PHOENIX CONTACT
General terms and conditions of use for technical documentation
Phoenix Contact reserves the right to alter, correct, and/or improve the technical
documentation and the products described in the technical documentation at its own
discretion and without giving prior notice, insofar as this is reasonable for the user. The
same applies to any technical changes that serve the purpose of technical progress.
The receipt of technical documentation (in particular user documentation) does not
constitute any further duty on the part of Phoenix Contact to furnish information on
modifications to products and/or technical documentation. You are responsible to verify the
suitability and intended use of the products in your specific application, in particular with
regard to observing the applicable standards and regulations. All information made
available in the technical data is supplied without any accompanying guarantee, whether
expressly mentioned, implied or tacitly assumed.
In general, the provisions of the current standard Terms and Conditions of Phoenix Contact
apply exclusively, in particular as concerns any warranty liability.
This manual, including all illustrations contained herein, is copyright protected. Any
changes to the contents or the publication of extracts of this document is prohibited.
Phoenix Contact reserves the right to register its own intellectual property rights for the
product identifications of Phoenix Contact products that are used here. Registration of such
intellectual property rights by third parties is prohibited.
Other product identifications may be afforded legal protection, even where they may not be
indicated as such.

106496_en_02 PHOENIX CONTACT 5
Table of contents
1 General information ...................................................................................................................7
1.1 General safety notes.............................................................................................. 7
1.2 Licensing information for open source software .................................................... 7
1.3 Requesting source code........................................................................................ 8
1.4 Disposal ................................................................................................................ 8
2 System description ....................................................................................................................9
3 Device descriptions .................................................................................................................13
3.1 PROFICLOUD device AXC CLOUD-PRO........................................................... 13
3.1.1 General description .............................................................................. 13
3.1.2 Unpacking ............................................................................................ 13
3.1.3 Connection and operating elements ....................................................14
3.1.4 Diagnostics and status indicators ........................................................ 15
3.1.5 Mode selector switch ........................................................................... 18
3.1.6 Reset button (concealed) ..................................................................... 20
3.1.7 Supply plug .......................................................................................... 21
3.1.8 Bus base module ................................................................................. 21
3.1.9 Automatic startup of the Axioline F local bus ........................................ 22
3.2 PROFICLOUD coupler CLOUD COUPLER-PRO................................................ 25
3.2.1 General description .............................................................................. 25
3.2.2 Unpacking ............................................................................................ 25
3.2.3 Connection elements ........................................................................... 25
3.2.4 Diagnostics and status indicators ........................................................ 26
3.2.5 Power connector .................................................................................. 27
3.2.6 Web-based management (WBM) ........................................................ 28
3.2.7 Renewing TLS certificates ................................................................... 37
3.2.8 Updating the firmware .......................................................................... 37
4 Mounting and power supply of the hardware ...........................................................................39
4.1 PROFICLOUD device AXC CLOUD-PRO........................................................... 39
4.1.1 Safety notes for mounting .................................................................... 39
4.1.2 Mounting .............................................................................................. 40
4.1.3 Sizing of the power supply ................................................................... 43
4.1.4 Connecting the power supply ............................................................... 44
4.1.5 Assigning the PROFINET device name ............................................... 44
4.2 PROFICLOUD coupler CLOUD COUPLER-PRO................................................ 45
4.2.1 Safety notes for mounting ................................................................45
4.2.2 Mounting .............................................................................................. 46
5 PROFICLOUD web interface ...................................................................................................49
5.1 License model ..................................................................................................... 49
5.2 Establishing a connection with the PROFICLOUD web interface ........................ 50

PROFICLOUD
6PHOENIX CONTACT 106496_en_02
5.3 Registration ......................................................................................................... 50
5.4 Signing in............................................................................................................. 53
5.5 Account Menu ..................................................................................................... 55
5.5.1 Device overview and configuration – the “Overview” page ................... 55
5.5.2 Managing your balance – the “Balance” page ......................................62
5.5.3 Managing users – the “Users” page .....................................................64
5.5.4 Notifications – the “Notifications” page .................................................65
5.5.5 Renaming the account – the “Rename” page ....................................... 67
5.5.6 Deleting an account – the “Delete” page .............................................. 68
5.6 User Menu........................................................................................................... 70
5.6.1 Creating an account – the “Create Account” page ............................... 70
5.6.2 Switching account – the “Switch Account” page ................................... 72
5.6.3 Changing user preferences – the “Preferences” page ..........................73
5.7 Logging out.......................................................................................................... 79
6 Technical data and ordering data .............................................................................................81
6.1 AXC CLOUD-PRO technical data........................................................................ 81
6.2 CLOUD COUPLER-PRO technical data.............................................................. 83
6.3 Ordering data ...................................................................................................... 84
6.3.1 Products .............................................................................................. 84
6.3.2 Accessories ......................................................................................... 84
6.3.3 Software ............................................................................................... 84
6.3.4 Documentation ..................................................................................... 85
A PROFICLOUD services ............................................................................................................87
A 1 CLOUD SERVICE/WEATHER ............................................................................ 87
A 2 CLOUD SERVICE/CALC.....................................................................................94
B Error causes and remedies.......................................................................................................97
B 1 AXC CLOUD-PRO............................................................................................... 97
B 2 CLOUD COUPLER-PRO..................................................................................... 98
C Appendix for document lists......................................................................................................99
C 1 List of figures ....................................................................................................... 99
C 2 List of tables ...................................................................................................... 101
C 3 Index.................................................................................................................. 103

General information
106496_en_02 PHOENIX CONTACT 7
1Generalinformation
1.1 General safety notes
Observe the country-specific installation, safety, and accident prevention regulations.
During startup and maintenance work, proceed in accordance with the five safety rules of
DIN EN 50110-1. In general, the rules should be observed in the specified order:
– Disconnect safely
– Ensure power cannot be switched on again
– Verify safe isolation from the supply
– Ground and short circuit
– Cover or safeguard adjacent live parts
Once the work is complete, perform the above steps again in reverse order.
1.2 Licensing information for open source software
All licensing information for the individual Linux packages can be found in the web-based
management (WBM) of the PROFICLOUD coupler:
•Open the WBM of the PROFICLOUD coupler (see Section 3.2.6).
•Click on the “Licenses” link on the bottom-left of the WBM.
•Download the text file located here containing the licensing information.
NOTE:
IP20 protection (IEC 60529/EN 60529) requires that the devices are used in a clean and
dry environment. Do not subject the devices to mechanical and/or thermal loads that ex-
ceed the specified limits.

PROFICLOUD
8PHOENIX CONTACT 106496_en_02
1.3 Requesting source code
The PROFICLOUD coupler CLOUD COUPLER-PRO contains software components li-
censed as open-source software by the copyright holder.
The source code of these software components can be requested from After Sales Service
at Phoenix Contact in the form of a CD or DVD-ROM for a processing fee of 50 euros within
three years of delivery of the PROFICLOUD coupler.
PHOENIX CONTACT GmbH & Co. KG
After Sales Service
Flachsmarktstraße 8
32825 Blomberg
GERMANY
Subject: Source code CLOUD COUPLER-PRO
1.4 Disposal
•Do not dispose of the PROFICLOUD coupler with household waste; it should instead
be disposed of in accordance with the currently applicable national regulations.
The printed-circuit board of the PROFICLOUD device is fitted with a lithium battery.
•Do not dispose of the device with household waste; it should instead be disposed of in
accordance with the currently applicable national regulations.

System description
106496_en_02 PHOENIX CONTACT 9
2Systemdescription
A standard PROFICLOUD application comprises at least one PROFICLOUD coupler, a
PROFICLOUD device, and a PROFINET controller.
PROFINET controller The PROFINET controller can be purchased from any controller manufacturer as long as
the device in question complies with the PROFINET specification.
PROFICLOUD coupler
CLOUD COUPLER-PRO
The PROFICLOUD coupler connects the local PROFINET network to the PROFICLOUD by
means of two Ethernet interfaces: the PROFICLOUD coupler is connected with the local
PROFINET network via the first Ethernet interface. The second Ethernet interface connects
the PROFICLOUD coupler to the Internet. The PROFICLOUD coupler initializes a connec-
tion with the PROFICLOUD automatically and is ready for use after a short amount of time.
The PROFICLOUD coupler must be registered in the PROFICLOUD with a UUID (Univer-
sally Unique Identifier). The PROFINET network then commences communication via the
PROFICLOUD.
PROFICLOUD devices
AXC CLOUD-PRO
PROFICLOUD devices are also connected to the Internet and are coupled automatically to
the PROFICLOUD.
The PROFICLOUD devices must each be registered in the PROFICLOUD with a UUID (Uni-
versally Unique Identifier) and must be assigned to a PROFICLOUD coupler. The
PROFINET network then commences communication via the PROFICLOUD.

PROFICLOUD
10 PHOENIX CONTACT 106496_en_02
Figure 2-1 PROFICLOUD system overview
Key:
Emul.-
field device
Cloud field device
Coupler
PN
Device
PN
Device
PROFINET
Controller
Virtual cloud field device
Emul.-
field device
Emul.-
field device
Hybrid cloud field device
Hybrid cloud field device
PROFINET controller: PROFINET controller of the local PROFINET network
PN device: PROFINET devices of the local PROFINET network
Coupler: PROFICLOUD coupler for connecting the local
PROFINET network to the PROFICLOUD
Emul. field device: Locally emulated PROFINET device
Cloud field device: Distributed PROFICLOUD device
(e.g., AXC CLOUD-PRO)
Virtual cloud field device: Virtual PROFICLOUD device
(e.g., CLOUD SERVICE/CALC)
Hybrid cloud field device: Combination of virtual and distributed PROFICLOUD de-
vice

System description
106496_en_02 PHOENIX CONTACT 11
A typical PROFICLOUD system consists of a local PROFINET network, which is connected
to the PROFICLOUD via the PROFICLOUD coupler CLOUD COUPLER-PRO. Distributed
PROFICLOUD devices can be deployed all over the world (see Figure 2-2).
The encryption protocol TLS (Transport Layer Security) is used to ensure secure communi-
cation between the PROFICLOUD devices.
The PROFICLOUD allows you to use services from the Internet or PROFICLOUD services
developed in house in the PROFINET network. The services are represented and handled
in the PROFINET network as PROFINET devices. For example, weather data can be re-
trieved from the Internet by means of a weather service.
Another example of the use of Internet services is the outsourcing of highly resource-con-
suming calculations to the PROFICLOUD. With the CLOUD SERVICE/CALC calculation
service, calculations can be sent to the PROFINET network as input process data using
MATLAB® notation. The results are returned in the form of output process data.
Figure 2-2 PROFICLOUD with PROFICLOUD devices distributed worldwide
RUN/PROG
LNK LNK
24VDC
+
–
LAN
1.1
ACT
LAN
1.2
ACT
LNK
LAN
2
ACT
SYNC
USB
DISPLAY
RFC460 PN 3TX
Ord.No27 00 784
MRESET
STP
24VD
+
–
S
PROFICLOUD
LINK
X1
X2
X3
ACT
LINK ACT
RUN
FAIL
DBG
BF
SF
D
SD-CARD
RUN/PROG
MRESET
STOP
X1
X
2
X
3
AC
T
AC
T
€
PC PROFINET
control system Local PROFINET
I/O station
PROFICLOUD
coupler
Distributed
PROFINET station
Secure
TLS encryption
New York
Berlin
Tokio
Distributed
PROFINET station
X1
D
UI
a1
a2
b1
b2
01
11
21
31
00
10
20
30
01
11
21
31
00
10
20
30
03
13
23
33
02
12
22
32
03
13
23
33
02
12
22
32
05
15
25
35
04
14
24
34
05
15
25
35
04
14
24
34
07
17
27
37
06
16
26
36
07
17
27
37
06
16
26
36
910111213141516
DI32/1
2688035
9
10
11
12
13
14
15
16
a01234567
DI16/4 2688022
DI1
6/
4
2688022
UI
RUN
FAIL
DBG
D
E
BF
SF
ONL
LINK
X1
X2
ACT
LINK ACT
X3
a1
UL
a2
b1
b2
SD-CARD
PROG
DREG
CLOUD
X1
X
2
ACT
ACT
X3
b
b
b1
1
b
b
b2
2
X1
D
UI
a1
a2
b1
b2
01
11
21
31
00
10
20
30
01
11
21
31
00
10
20
30
03
13
23
33
02
12
22
32
03
13
23
33
02
12
22
32
05
15
25
35
04
14
24
34
05
15
25
35
04
14
24
34
07
17
27
37
06
16
26
36
07
17
27
37
06
16
26
36
910111213141516
DI32/1
2688035
9
10
11
12
13
14
15
16
a01234567
DI16/4 2688022
DI1
6/
4
2688022
UI
RUN
FAIL
DBG
D
E
BF
SF
ONL
LINK
X1
X2
ACT
LINK ACT
X3
a1
UL
a2
b1
b2
SD-CARD
PROG
DREG
CLOUD
X1
X
2
AC
T
AC
T
X3
b
b
b1
b
b2
b2
2
X4:USB X5:USB
X3:Internet X2: PROFINET
X1:PWR 24VDC
ERROR ONLINE CF PWR
X1:PWR 24VDC
123
Please note:
The PROFICLOUD system is not designed for real-time communication.

PROFICLOUD
12 PHOENIX CONTACT 106496_en_02

Device descriptions
106496_en_02 PHOENIX CONTACT 13
3 Device descriptions
3.1 PROFICLOUD device AXC CLOUD-PRO
3.1.1 General description
The PROFICLOUD device AXC CLOUD-PRO is a controller which can be extended with
I/O modules from the Axioline F product range. The AXC CLOUD-PRO is used primarily for
remote control technology applications.
3.1.2 Unpacking
The PROFICLOUD device is supplied in an ESD bag together with a package slip with in-
stallation instructions. Please read the complete package slip carefully before unpacking
the PROFICLOUD device.
The hardware of the PROFICLOUD device corresponds largely to that of the AXC 1050
controller.
For additional information on the hardware of the PROFICLOUD device, please refer to
the “Installing and operating the AXC 1050 and AXC 1050 XC controllers” user manual.
The user manual can be downloaded at phoenixcontact.net/products.
Only the I/O modules listed under “Accessories” on page 84 can be used.
NOTE: Electrostatic discharge!
The device contains components that can be damaged or destroyed by electrostatic dis-
charge. When handling the device, observe the necessary safety precautions against
electrostatic discharge (ESD) according to EN 61340-5-1 and IEC 61340-5-1.

PROFICLOUD
14 PHOENIX CONTACT 106496_en_02
3.1.3 Connection and operating elements
Figure 3-1 Connection and operating elements of the PROFICLOUD device
The PROFICLOUD device consists of the following components:
1. Bus base module
2. Reset button
3. Programming interface
4. Electronics module
5. Ethernet interfaces (X1, X2)
6. FE tab (X3); 2.8 mm, for optional connection to functional earth ground
7. Plug for connecting the supply voltage
8. SD card holder
9. Mode selector switch
10. Diagnostics and status indicators
The SD card is not supplied as standard.
Please refer to the ordering data in Section “Accessories” on page 84.
1
3
2
4
5
7
6
10
9
8

Device descriptions
106496_en_02 PHOENIX CONTACT 15
3.1.4 Diagnostics and status indicators
Figure 3-2 Diagnostics and status indicators of the PROFICLOUD device
CLOUD
X4
UL
UL
ETH
PWR
LED
ONL
PROG
DREG
Table 3-1 Diagnostics and status indicators of the PROFICLOUD device
Desig-
nation
Color Meaning State Description
LED: PROFINET diagnostics, diagnostics of the PROFICLOUD device and Axioline F diagnostics
BF red
Status of
PROFINET com-
munication/com-
munication error
(BusFail)
PROFINET controller function1
off
The PROFICLOUD device (PROFINET controller) has estab-
lished an active communication connection to each configured
PROFINET device.
on No link status on the Ethernet interfaces and/or no 100 Mbit
transmission and/or no full duplex operation.
flashing
(1 Hz)
Link status present, at least one configured PROFINET device
has no communication connection.
PROFINET device function1
off
A PROFINET controller has established an active communica-
tion connection to the PROFICLOUD device (PROFINET de-
vice) or the function of the PROFINET device is switched off.
on No PROFINET communication (no link status at the Ethernet in-
terfaces).
flashing
(1 Hz)
Link status available, no communication connection to the
PROFINET controller.
SF red Group error
(PROFINET)
off PROFINET diagnostics not present.
on PROFINET diagnostics present.
ONL green
Status of the con-
nection to the
PROFICLOUD
off No connection to the PROFICLOUD
on Connection to the PROFICLOUD is OK.
flashing
(0.5 Hz)
Connection to the PROFICLOUD was established, but the
PROFICLOUD device is not connected with a PROFICLOUD
coupler in the PROFICLOUD.
flashing (4
Hz)
The PROFICLOUD device is in DREG mode (see
Section 3.1.5).

PROFICLOUD
16 PHOENIX CONTACT 106496_en_02
RUN green RUN status of the
device
off IEC 61131 runtime system not ready for operation.
flashing
(0.5 Hz)
IEC 61131 runtime system successfully initialized.
Control function is in the READY/STOP state, program not pro-
cessed.
flashing (2
Hz)
The PROFICLOUD device is being reset to default state.
on
IEC 61131 runtime system successfully initialized. A program is
running.
Control function is in the RUN state.
FAIL red Error
on A runtime error has occurred in the IEC 61131 runtime system
program.
off No runtime error has occurred in the IEC 61131 runtime system
program.
flashing
(0.5 Hz)
The hardware watchdog of the PROFICLOUD device has been
triggered.
DBG yellow Debug mode
(troubleshooting)
on
The IEC 61131 runtime system/PROFICLOUD device is in
debug mode, i.e., debug mode has been activated in PC Worx
(breakpoint(s) set and/or variable(s) forced).
The state of the RUN LED is not affected.
flashing (2
Hz)
Boot phase of the PROFICLOUD device, from sending the
BootP request to assigning the IP address settings, if the MAC
address of the PROFICLOUD device has been entered in the
PC Worx software. Otherwise stops flashing after three failed
BootP requests.
Table 3-1 Diagnostics and status indicators of the PROFICLOUD device
Desig-
nation
Color Meaning State Description

Device descriptions
106496_en_02 PHOENIX CONTACT 17
Dred/yel-
low/green
Axioline F: diag-
nostics for local
bus communica-
tion
green on
Run:
The Axioline F station is ready for operation; communication
within the station is OK.
All data is valid. There is no malfunction.
flashing
green
Active:
The Axioline F station is ready for operation; communication
within the station is OK. The data is not valid. Valid data from
the controller is not available. There is no malfunction in the de-
vice.
yellow on
Ready:
The Axioline F station is ready for operation; no data is being
exchanged.
flashing yel-
low
Access from Startup+ in I/O check mode
flashing yel-
low/red
Local bus error during active I/O check
flashing red
Local bus error during startup
Possible causes:
– Configuration cannot be generated; information is missing
from a device.
– Chip version of a device is < V 1.1.
– The desired and actual configuration are different.
– No local bus device connected
– The maximum number of local bus devices has been ex-
ceeded.
red on
Local bus error in RUN state
The Axioline F station is ready for operation but has lost con-
nection to at least one device.
Possible causes:
– Communication error
– Axioline F device has been removed or configured device
is missing.
– Reset at an Axioline F device
– Serious device error at an Axioline F device (Axioline F de-
vice can no longer be reached)
off Power down:
Axioline F device is in (power) reset.
Eyel-
low/red Error/warning yellow on I/O warning at an Axioline F device
red on I/O error at an Axioline F device
PWR: supply voltage (communications power UL)
UL green ULogic
off 24 V communications power supply not present or too low.
on 24 V communications power supply present.
Table 3-1 Diagnostics and status indicators of the PROFICLOUD device
Desig-
nation
Color Meaning State Description

PROFICLOUD
18 PHOENIX CONTACT 106496_en_02
3.1.5 Mode selector switch
The mode selector switch is used to define the operating state of the AXC CLOUD-PRO.
The PROG and CLOUD positions have a toggle button function and the DREG position a
pushbutton function. After releasing the switch in the DREG position, it returns to the
CLOUD position.
The application program is processed in each operating mode. The PC Worx software can
be used for program and configuration modifications as well as for the online monitoring
function.
ETH: Ethernet interfaces
LNK green Link status
off Connection not established successfully
on Connection established successfully (link): the PROFICLOUD
device is able to contact another network device.
flashing
(0.5 Hz)
PROFINET device identification “flashing”
ACT yellow Activity status
off Data transmission inactive
on/flashing Data transmission active (activity): the Ethernet interface is
sending or receiving data.
1The PROFINET functions are currently not supported.
Table 3-1 Diagnostics and status indicators of the PROFICLOUD device
Desig-
nation
Color Meaning State Description
The application program is not processed if an error has occurred in the AXC CLOUD-
PRO or if the application program has been stopped by PC Worx.
Please note:
Each time the operating mode is changed, the AXC CLOUD-PRO is restarted and the
AXC CLOUD-PRO attempts to establish a connection to the PROFICLOUD.

Device descriptions
106496_en_02 PHOENIX CONTACT 19
Figure 3-3 Mode selector switch
Table 3-2 Operating modes of the AXC CLOUD-PRO
Operating
mode
Explanation
PROG PLC mode
The AXC CLOUD-PRO is used like a controller of type AXC 1050; the
PROFINET functions are currently not supported. The Ethernet inter-
faces can be used for programming.
If there is a connection to the Internet, communication with the
PROFICLOUD is active.
CLOUD PROFICLOUD mode
Only communication with the PROFICLOUD is possible. The Ethernet
interfaces cannot be used for other communication.
However, the Ethernet interfaces can be used by means of the applica-
tion program.
DREG Deregistration from PROFICLOUD
If the AXC CLOUD-PRO is connected to the PROFICLOUD (the
CLOUD LED lights up), you can deregister the AXC CLOUD-PRO from
the PROFICLOUD as follows:
•Hold down the mode selector switch (for approx. four seconds) in
DREG position until the CLOUD LED begins to flash.
The AXC CLOUD-PRO is restarted. After restarting, the device is
deregistered from the PROFICLOUD and can be registered in another
account.
CLOUD
106496A001
PROG
DREG
SD-CARD

PROFICLOUD
20 PHOENIX CONTACT 106496_en_02
3.1.6 Reset button (concealed)
Figure 3-4 Reset button (1, concealed)
The reset button on the AXC CLOUD-PRO can only be operated with a pointed object (e.g.,
a pen) and is therefore protected against accidental activation.
If the reset button is actuated during operation, the AXC CLOUD-PRO is restarted. Further-
more, if you carry out a voltage reset simultaneously as you press the reset button, this
causes the controller to completely reset.
Reset • Switch off the supply voltage of the AXC CLOUD-PRO.
The LEDs go out.
•Press the reset button.
•Hold down the reset button and switch the supply voltage on.
•Release the reset button only after the RUN LED flashes quickly (item 2 in Figure 3-4).
The device is now completely reset. The DBG LED then begins to flash and the
AXC CLOUD-PRO sends a DHCP request. The process has been completed once the
RUN LED flashes slowly.
The AXC CLOUD-PRO has been initialized and reset successfully. The control function is
in the READY/STOP state; a program is not processed.
1
8482A006
2
NOTE: No automatic startup of the Axioline F local bus
In the default settings, the AXC CLOUD-PRO contains an application program for the au-
tomatic startup of the Axioline F local bus. When the AXC CLOUD-PRO is completely re-
set, the application program is deleted. Automatic startup of the Axioline F local bus is
then no longer possible.