Polaris 2880612 User manual

P/N 9925506 Rev 01 05/14 Page 1 of 5
P/N 2880612; 2880613
DOOR BAG KIT
APPLICATION
RZR 900 S
BEFORE YOU BEGIN
Before you begin, read these instructions twice and check to be sure all parts and tools are accounted for.
Please retain these installation instructions for future reference and parts ordering information.
KIT CONTENTS (PN 2880612)
Ref Qty Part Description Part Number
1 1 Upper Front Door Bag-60, LH 2635598
2 1 Upper Front Door Bag-60, RH 2635599
1 Instructions 9925506
1
2

P/N 9925506 Rev 01 05/14 Page 2 of 5
TOOLS NEEDED
Torx Wrench
KIT CONTENTS (PN 2880613)
Ref Qty Part Description Part Number
1 1 Lower Front Door Bag - 60, LH 2635600
2 1 Lower Front Door Bag - 60, RH 2635601
1 Instructions 9925506
APPROXIMATE ASSEMBLY TIME
15 mins
IMPORTANT
Your Polaris DOOR BAG KIT is exclusively designed for your vehicle. Please read the installation
instructions thoroughly before beginning. Installation is easier if the vehicle is clean and free of debris.
For your safety, and to ensure a satisfactory installation, perform all installation steps correctly in the
sequence shown.
1
2

P/N 9925506 Rev 01 05/14 Page 3 of 5
INSTALLATION INSTRUCTIONS
For Kit PN 2880612
1. Place the vehicle in “PARK” and turn
the key to “OFF” position. Remove the
key from the vehicle.
2. On the passenger side, remove the
plastic door by removing screws (A) at
six locations as shown in gure.
3. Place the RH side upper front door bag
(PN 2635599) on the door stamping
and hook the four plastic hooks (B) on
top and one hook (C) on the side as
shown in gures.
A
C
B

P/N 9925506 Rev 01 05/14 Page 4 of 5
4. Wrap and tie the Velcro (D) to the door
stamping at three places as shown in
gure.
5. Reinstall the plastic door and attach six
screws removed in the Step 1.
NOTE: The four screws (E) need to
be installed inside the upper door bag
through the provided holes as shown in
gure.
6. Repeat the Steps 1-4 to install the LH side upper front door bag (PN 2635598).
D
E

P/N 9925506 Rev 01 05/14 Page 5 of 5
2. Wrap and tie the Velcro (G) to the door
stamping at three places as shown in
gure.
For Kit PN 2880613
1. On the passenger side lower door,
place the RH side lower front door bag
(PN 2635601) on the door stamping
and hook the three plastic hooks (F) on
top as shown gure.
3. Repeat the Steps 1-2 to install the LH side lower front door bag (PN 2635600).
F
G