Polaris 2879954 User manual

P/N 9925360 Rev 01 06/14
Before you begin, read these instructions twice and check to be sure all parts and tools are accounted for. Please
retain these installation instructions for future reference and parts ordering information.
P/N 2879954
STEEL ROOF KIT
Application
RANGER 570 AND RANGER ETX
-1-
Kit Contents:
Ref Qty Part Description Part Number
1 2 Side Foam Seal, Steel Roof 5814085
2 1 Steel Roof Weldment 1020417
3 2 Light Bracket Mount, Steel Roof 5259057
4 1 Rear Foam Seal, Steel Roof 5814084
5 1 Front Bulb Seal, Roof 5814086
6 1 Steel Roof Liner 5814172
7* 3 Bolt-M6X1.0X15, PH/TX-Olive D 7518656
8* 4 Screw-M6X1X40, TR/TX-Black 7519001
1 Instructions 9925360
Items marked (*) are included in Hardware Kit PN 2205781.
APPROXIMATE ASSEMBLY TIME: 10 minutes
Tools Required:
Safety Goggles Torx Drivers
6
5
2
1
8
3
7
1
4

P/N 9925360 Rev 01 06/14
IMPORTANT: Your Polaris STEEL ROOF KIT is exclusively designed for your vehicle. Please read
the installation instructions thoroughly before beginning. Installation is easier if the vehicle is clean
and free of debris. For your safety and to ensure a satisfactory installation, perform all installation
steps correctly and in the sequence shown.
-2-
INSTALLATION INSTRUCTIONS:
Figure 1
1. Place the vehicle in ‘‘PARK’’. Turn the
key to “OFF” position and remove from
the vehicle.
2. Place the roof on the top of the vehicle.
Figure 1.
Figure 2
3. Secure the roof with four M6 screws
(PN 7519001) from the rear of the
vehicle through the mount bracket
(PN 5259057) into the ROPS frame.
Tighten to 6 ft. lbs. (8.13 Nm). Figure 2.
Figure 3
4. Install the three M6 bolts (PN 7518656)
to secure the front of roof to upper
frame on the vehicle. This will also help
to compress the front seal
(PN 5814086) for best sealing in
inclement weather. Torque to 16 ft-lbs.
(21.7 Nm). Figure 3.
M6 Bolt
Roof
Mount
Bracket
M6 Screws