Polaris 2882534 User manual

APPLICATION
Verify accessory fitment at Polaris.com.
BEFORE YOU BEGIN
Read these instructions and check to be sure all parts and tools are accounted for.
Please retain these installation instructions for future reference and parts ordering
information.
KIT CONTENTS
This kit contains parts for installation of the audio adapter only. Prior installation of the RIDE COMMAND™
Display Harness (included in kit PN 2882069, or equivalent) is also required (sold separately).
This Kit includes:
REF QTY PART DESCRIPTION PART NUMBER
1 1 Harness, Audio Adapter -
1 Instructions 9927803
TOOLS REQUIRED
None
IMPORTANT
Your Audio Adapter Kit is exclusively designed for your vehicle. Please read the installation instructions
thoroughly before beginning. Installation is easier if the vehicle is clean and free of debris. For your safety, and to
ensure a satisfactory installation, perform all installation steps correctly in the sequence shown.
ASSEMBLY TIME
Approximately 5 minutes
Instr 9927803 Rev 02 2017-03 Page 1 of 3
P/N 2882534, 2883232
AUDIO ADAPTER KIT

Instr 9927803 Rev 02 2017-03 Page 2 of 3
HARNESS DETAIL
AUDIO ADAPTER HARNESS qq:
REF PART DESCRIPTION WIRE
COLOR
PIN QTY/
GENDER
CONNECTS TO
1A Connector, Bullet, Remote On Blue 1 male Audio Pod Kit (PN 2881227*) or
Door Panel Speaker Amplifier Kit
(PN 2882122*)
1B Connector, Audio Out -4 male
1C Connector, Display -8 male Display harness audio amp
connector; included in RIDE
COMMAND™7” Display Mount Kit
(PN 2882069*)
* Or compatible kit.

Instr 9927803 Rev 02 2017-03 Page 3 of 3
INSTALLATION INSTRUCTIONS
1. Shift vehicle transmission into “PARK”. Turn key to
“OFF” position and remove from vehicle.
2. Gain access (as required; see instructions
included with audio accessory).
3. Join display connector 1C on audio adapter
harness qto appropriate AUDIO AMP connector
on RIDE COMMAND™Display Mount Harness
(included in accessory kit PN 2882069, or
equivalent).
See previous section, HARNESS DETAIL, for
connector identification.
IF you are connecting
this accessory (sold
separately):
THEN join display
connector 1C to:
Audio Pod Kit (PN
2881227, 2882304), Door
Panel Speaker Amplifier
Kit (PN 2882122), or
equivalent
AUDIO AMP 1 or
AUDIO AMP 2
Subwoofer Kit (PN
2882063) or equivalent
AUDIO AMP 3
NOTE
AUDIO AMP 1, AUDIO AMP 2, and AUDIO AMP 3
connectors are located in the upper dash
compartment.
AUDIO AMP 1 and AUDIO AMP 2 connectors are
interchangeable.
4. Join REMOTE ON bullet connector 1A and AUDIO
OUT connector 1B on audio adapter harness qto
corresponding connectors on accessory.
5. Restore access.
FEEDBACK FORM
A feedback form has been created for the installer to provide any comments, questions
or concerns about the installation instructions. The form is viewable on mobile devices
by scanning the QR code or by clicking HERE if viewing on a PC.
FEEDBACK FORM