PROAIM SnapRig CG219 User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
SnapRig Universal DSLR Camera Cage (CG219)
Assembly Manua l
Camera Cage with slide bars
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
3 x Allen Keys Sizes:
(3/16mm,4mm & 3mm)
Top Handle
Wooden Side Handle
Top Plate Camera Plate
2 x Slide Bars

2
DSLM Camera Cage Setup
• Remove both the Allen bolts of the camera
plate with the help of a 3/16mm Allen key and
aach it to the boom part of the camera
cage.
Top Handle
• Then Align the top plate with the camera cage
and secure it properly with the help of a
3/16mm Allen Key by inserng both the Allen
bolts on the top plate.
• Place the top handle above the top plate.
NOTE: The provided mulple threads of the top
plate allow you to mount the top handle
anywhere according to your requirement.
• Aer placing the top handle on the top plate,
match the bolt with the side threads of the
handle, insert the buon head, and ght it
with the help of a 4mm Allen key.
• Remove both the Allen bolts on the top plate
with a 3/16mm Allen key.
• Then secure it with the help of a 3/16mm
allen key.
NOTE: You can adjust both the top and base
plates to your requirements by loosening the
bolt and sliding it in.

3
• The wooden side handle is now properly ght.
Interchange Slide Bars
• Then remove the buon head from both sides
of the camera cage with the help of a 4mm
Allen key.
• Match the provided screw hole on the boom
of the camera plate with the camera
(Not Included) hole and screw it ghtly with
the help of a screwdriver.
Side Handle
• Match the wooden side handle with the side
thread of the camera cage and insert the side
handle and ghten it properly with its knob.
NOTE: You can hold the handle anywhere on the
provided mulple threads of the Camera Cage
according to your requirement.
• Loosen the knob of the wooden side handle
and remove the handle.
• Aach the Camera (Not Included) into the
Camera cage properly by sliding it onto the
shoe mount on the top plate.

4
• The buon heads have been properly
removed from both sides of the camera cage
and remove the camera cage's exisng side
sliding bar.
NOTE: The exisng slide bar is comparavely
larger than the given slide bar; you can use them
according to your size requirements.
• Insert the slide bars from both sides by sliding
them on the camera cage.
• By aligning the slide bars properly, insert the
Allen bolt matching the thread of the sliding
bars.
• Tighten the buon head properly (front and
back) using a 4mm Allen key.
• Adjust the height of the camera cage
according to your camera's height.
• Match the wooden side handle with the side
thread of the camera cage and insert the
wooden side handle and ghten it properly
with its knob.

5
YOUR PROAIM SNAPRIG UNIVERSAL DSLR CAMERA CAGE
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.