PROAIM G-HRZN-01 User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Assembly Manua l
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Proaim Horizon Car Mount
Horizon Sucon Camera Mount for Car
(G-HRZN-01)
3 x Dust Covers
2 x Ratchet Belts

2
NOTE: To guarantee proper adhesion of
sucon cups, check that the surfaces of both
sucon cup and mounng surface are clean, dry
& dust-free. Please mount the device on smooth,
even, non-porous and metal surfaces.
 Mount the Robust sucon cup gripper on a at
surface, as shown in the image.
Horizon Sucon Camera Mount Setup
 Press the lever of the Robust Sucon Cup
Gripper and lock it properly.
 Secure the movement of the ball joint with the
help of the Ratchet knob of the Telescopic legs.
NOTE: Three Ratchet knobs are provided in
Horizon car mount. With the help of the boom
knob, you can change the ball joint movement of
the telescopic legs.
 Loosen the center Ratchet knob of the
telescopic legs.
 Adjust the height of the telescopic legs
according to your requirement and Tighten
the Ratchet knob properly as shown in the
image.
 Properly mount the Ball head (not included) at
the top plaorm of the Horizon car mount,
which has a 3/8"-16 camera screw, and secure
it.
NOTE: You can set up the system in just a few
minutes. The top of the Horizon car mount has a
3/8"-16 screw to mount your camera.

3
 Unlock the lever of the ball head
(Not-Included)
 You can loosen or ghten the Ratchet belt
accordingly, as shown in the picture.
 Remove the camera mounng plate and
mount the camera (Not-Included) on the
Ball Head.
 Hook the second side of the ratchet belt to
the car so that the setup is properly secured
with double security.
NOTE: We always recommend using ratchet
belts while using the equipment for double
safety.
 Hook the Ratchet belt with the horizon
sucon mount.
NOTE: Although the horizon car mount holding
force is sucient for regular driving shots,
safety belts must be used for addional
protecon.
 Your setup is ready to use.
NOTE: Test all xtures before driving .
NOTE: Horizon car mount it anywhere, whether
it's on the roof, hood, trunk, or side of a moving
vehicle. The sturdy device safely holds 40kg/88lb
for steady shots and 15kg/33lb for running
shots.

4
YOUR PROAIM HORIZON SUCTION CAMERA MOUNT FOR CAR
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our ut-
most support and care unl you use our product.