PROAIM Low Ninja Baby TP-LNJB-01 User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Low Ninja Baby 5/8” Double Riser Stand
(TP-LNJB-01)
Assembly Manua l
Low Ninja Baby Stand

Low Ninja Baby Stand Setup
2
• Loosen the knob of the Low Ninja baby stand
and spread the legs of the stand equally.
NOTE: The stand collapses easily to an extremely
small size, making it ideal for both storing and
traveling .
• After spreading the legs, properly tighten the
knob of the stand.
NOTE: The Baby Stand is equipped with leveling
leg for balancing loads on an incline or uneven
terrain &you can glide your stand comfortably as
the feet have rounded plasc capping to them.
• Loosen the top knob of the Low Ninja stand
and increase the height of the stand, as shown
in the image.
• After increasing the height, properly tighten
the knob.
• To increase the extra height of the stand, loos-
en the bottom knob and increase the height.
• Set the stand’s height according to your re-
quirement.
NOTE: The stand rises to a maximum height of
39.8" / 101.1 cm and can go as low as 22.2" /
56.5 cm with built-in solid locks to steady the
stand's height.

3
• Loosen the knob of the levelling leg to
properly balance the stand and then again
tighten the knob.
NOTE: The Baby Stand is equipped with leveling
leg for balancing loads on an incline or uneven
terrain & you can glide your stand comfortably
as the feet have rounded plasc capping to
them.
• Light mount karne ke bad knob ko properly
ght kar dain.
NOTE: The 5/8" baby pin on the top allows you
to mount studio equipment like lights,
reectors, backgrounds, & even a Camera
Stabilizer System & Gimbals with support
accessories.
• Light ki knob ko loose krain or low ninja stand
par mount krain.
NOTE: It is a 3-secon, double-riser stand with a foot base, collapsible legs, and a middle-level spreader,
which oers excellent steadiness for your lighng equipment indoors and outdoors
Light Setup

4
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our ut-
most support and care unl you use our product.
YOUR PROAIM LOW NINJA BABY DOUBLE RISER STAND
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
NOTE: 1. Low Ninja Baby Stand, oering the
ulmate soluon for supporng heavy xtures
or any grip equipment low to the ground.
2. This Baby Ninja stand is perfectly balanced
to mount heavy xtures, boom, or studio
lights at incredibly low angles, oering solid
support in the studio and easy transportaon
to locaons shoots.