protech PA-3320 User manual

USER’S
MANUAL
PA-3320
POS Terminal Powered by
Intel
®
Atom
®
Platform
P
A
-
33
2
0
M
1

PA-3320 Series POS System
With LCD/Touch screen
COPYRIGHT NOTICE
All trademarks and registered trademarks mentioned herein are the property of their
respective owners.
This manual is copyrighted Oct. 2012. You may not reproduce or transmit in any
form or by any means, electronic, or mechanical, including photocopying and
recording.
DISCLAIMER
This user’s manual is meant to assist users in installing and setting up the system. The
information contained in this document is subject to change without any notice.
CE NOTICE
This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.

FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
You are cautioned that any change or modifications to the equipment not expressly
approve by the party responsible for compliance could void your authority to operate
such equipment.
CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer. Dispose of used batteries
according to the manufacturer’s instructions.
WARNING! Some internal parts of the system may have high electrical voltage. And
therefore we strongly recommend that qualified engineers can open and disassemble the
system.The LCD and Touchscreen are easily breakable, please handle them with extra
care.

Contents
TABLE OF CONTENTS
CHAPTER 1 INTRODUCTION
1-1 About This Manual…........................................................ 1-2
1-2 POS System Illustration…................................................. 1-3
1-3 System Specification…...................................................... 1-4
1-4 Safety Precautions…......................................................... 1-6
CHAPTER 2 SYSTEM CONFIGURATION
2-1 Jumper & Connector Quick Reference Table…................ 2-2
2-2 Component Locations….................................................... 2-3
2-3 How to Set the Jumpers…................................................. 2-5
2-4 COM Port & VGA Connector…………………………... 2-7
2-5 COM Port RI and Voltage Selection……………………. 2-9
2-6 Mini-DIM & USB Connector…………………………… 2-10
2-7 LAN & USB Connector…………………………………. 2-11
2-8 Cash Drawer Connector…………………………………. 2-12
2-9 Cash Drawer Power Selection………………………....... 2-13
2-10 Backlight Type Selection………………………..…......... 2-13
2-11 Power LED Connector…………….................................. 2-14
2-12 Fan Connector…………………………………………… 2-15
2-13 Power Connector………………………………………… 2-15
2-14 Reset Switch Connector………………............................. 2-16
2-15 Power for Thermal Printer Connector…………………... 2-16
2-16 External Speaker Connector…………………………….. 2-16
2-17 Inverter Connector………………………......................... 2-17
2-18 MSR/Card Reader Connector…………………………… 2-18
2-19 LVDS Connector…………………..…..……................... 2-18
2-20 LVDS Voltage Selection…………..……………………. 2-20
2-21 SATA Connector………………………………………... 2-20
2-22 SATA Power Connector………….................................... 2-21
2-23 Touch Panel Connector……..…………………………… 2-22
2-24 Clear CMOS Data Selection……………………….......... 2-22
2-25 Compact Flash Connector……………………………….. 2-23
2-26 Printer Connector……………………………………....... 2-24
2-27 Watch Dog Function Selection………………………….. 2-25
2-28 I-Button Connector……………………………………… 2-25
2-29 I-Button Function Selection…………………………....... 2-26

Contents
CHAPTER 3 SOFTWARE UTILITIES
3-1 Introduction....................................................................... 3-2
3-2 Intel
®
Chipset Software Installation Utility....................... 3-3
3-3 VGA Driver Utility…………………………….……....... 3-4
3-4 LAN Driver Utility............................................................ 3-5
3-5 Sound Driver Utility.......................................................... 3-6
3-6 Touch Screen Driver Utility……………..………………. 3-7
3-7 Wireless Driver Utility (Optional)………………………. 3-8
CHAPTER 4 AMI BIOS SETUP
4-1 Introduction....................................................................... 4-2
4-2 Entering Setup................................................................... 4-3
4-3 Main….............................................................................. 4-5
4-4 Advanced…....................................................................... 4-6
4-5 Boot................................................................................... 4-22
4-6 Security……..................................................................... 4-27
4-7 Chipset……………………………................................... 4-28
4-8 Exit.................................................................................... 4-34
APPENDIX A SYSTEM ASSEMBLY
Exploded Diagram for PA-3320 Base Cover…………………… A-2
Exploded Diagram for PA-3320 Top Case…............................... A-4
Exploded Diagram for PA-3320 CPU Cooler…………………... A-5
Exploded Diagram for PA-3320 Printer Box…………………… A-7
Exploded Diagram for PA-3320 Panel & Base Detachment…… A-8
Exploded Diagram for PA-3320 Main Board…………………... A-9
Exploded Diagram for PA-3320 Bottom Case………………….. A-10
Exploded Diagram for PA-3320 LCD Panel……………………. A-11
Exploded Diagram for PA-3320 LCD Holder………………….. A-14
Exploded Diagram for PA-3320 VFD Cover…………………… A-17
Exploded Diagram for PA-3320 3” Printer………….................. A-19
Exploded Diagram for PA-3320 3” Printer Cover……………… A-21
Exploded Diagram for PA-3320 2” Printer……………………... A-23

Contents
Exploded Diagram for PA-3320 2” Printer Cover……………… A-25
Exploded Diagram for PA-3320 HDD Module………………… A-27
Exploded Diagram for PA-3320 SSD Module………………….. A-28
APPENDIX B TECHNICAL SUMMARY
Block Diagram.............................................................................. B-2
Interrupt Map................................................................................ B-3
DMA Channels Map..................................................................... B-4
I/O Map........................................................................................ B-5
Watchdog Timer Configuration.................................................... B-8
Flash BIOS Update……............................................................... B-10

Page:1-1
INTRODUCTION
This chapter gives you the information for the PA-3320. It also outlines
the system specifications.
Sections included:
About This Manual
POS System Illustration
System Specifications
Safety precautions
Experienced users can jump to chapter 2 on page 2-1
for a quick start.
CHAPTER
1

Chapter 1 Introduction
Page: 1-2 PA-3320 USER
′ S MANUAL
1-1. ABOUT THIS MANUAL
Thank you for purchasing our PA-3320 Series System. The PA-3320 is an updated
system designed to be comparable with the highest performance of IBM AT personal
computers. The PA-3320 provides faster processing speed, greater expandability and
can handle more tasks than before. This manual is designed to assist you how to install
and set up the whole system. It contains four chapters and two appendixes. Users can
configure the system according to their own needs.
Chapter 1 Introduction
This chapter introduces you to the background of this manual. It also includes
illustrations and specifications for the whole system. The final section of this chapter
indicates some safety reminders on how to take care of your system.
Chapter 2 System Configuration
This chapter outlines the location of motherboard components and their function. You
will learn how to set the jumpers and configure the system to meet your own needs.
Chapter 3 Software Utilities
This chapter contains helpful information for proper installations of the Intel Utility,
VGA Utility, LAN Utility, Sound Utility, and Touch Screen Utility.
Chapter 4 AMI BIOS Setup
This chapter indicates you how to change the BIOS configuration.
Appendix A System Assembly
This appendix gives you the exploded diagrams and part numbers of the PA-3320.
Appendix B Technical Summary
This appendix gives you the information about the allocation maps for the system
resources, Watchdog Timer Configuration, and Flash BIOS Update.

Chapter 1 Introduction
PA-3320 USER ′ S MANUAL Page: 1-3
1-2. POS SYSTEM ILLUSTRATION
Front View Rear View
Top View Side View
I/O View
LAN
USB
COM2
COM1
COM3
COM4
(Optional)
DWR1 DC OUT DC IN
LPT
(Optional)
VGA

Chapter 1 Introduction
Page: 1-4 PA-3320 USER
′ S MANUAL
1-3. SYSTEM SPECIFICATIONS
System
CPU Intel
®
Atom
TM
D525
Chipset Intel
®
ICH8M
Operation System Windows 7/XP Pro
WES 7/2009
POSReady 7/2009
Memory 1 x 204-pin DDRIII SO-DIMM socket on board, up to 2GB
BIOS AMI SPI, 8Mbits with VGA
Power Supply 120W DC
Printer 2” or 3” easy loading thermal printer with auto cutter
(*Diameter of paper roll cannot exceed 8 cm.)
i-Button (Optional) Read only, output through PS/2 KB interface
MSR (Optional) JIS-I or II, ISO Tracker 1+2+3 (PS/2 KB
Interface)
Wireless LAN (Optional) Mini-PCIe wireless LAN module (802.11b/g)
Fingerprint (Optional) Embedded fingerprint module (USB Interface)
RFID (Optional) Read/Write, ISO 14443A 13.56MHz (USB
Interface)
Dimension (WxHxD) 369 mm x 287 mm x 355 mm
System Weight 9 Kg
Certificate FCC/CE
I/O Ports
Serial Port 3 x DB-9 (COM 2/3/4)
1 x RJ45 (COM1)
+5/12V Selectable (COM1~4)
USB 5 x USB 2.0 (one on front panel)
Keyboard/Mouse PS/2 with mini-DIN connector on rear panel
LAN 1 x 10/100/1000 Mbps
VGA 1 x DB-15 interface
Audio 1 x 2W speaker

Chapter 1 Introduction
PA-3320 USER ′ S MANUAL Page: 1-5
Display
LCD 15” TFT XGA
Max. Resolution 1024 x 768
Brightness 250 cd/ m
2
Touch Screen 15” 5-wire analog resistive
Viewing Angle 30˚~40˚

Chapter 1 Introduction
Page: 1-6 PA-3320 USER
′ S MANUAL
1-4. SAFETY PRECAUTIONS
The following messages are safety reminders on how to protect your systems from
damages, and extending the life cycle of the system.
1. Check the Line Voltage
a. The operating voltage for the power supply should be within the range of
100V to 240V AC; otherwise the system may be damaged.
2. Environmental Conditions
a. Place your PA-3320 on a sturdy, level surface. Be sure to allow enough
space around the system to have easy access needs.
b. Avoid installing your PA-3320 Series POS system in extremely hot or cold
places.
c. Avoid exposure to sunlight for a long period of time (for example, in a
closed car in summer time. Also avoid the system from any heating device.).
Or do not use the PA-3320 when it has been left outdoors in a cold winter
day.
d. Bear in mind that the operating ambient temperature is between 0°C and
35°C (32°F and 95°F).
e. Avoid moving the system rapidly from a hot place to a cold place, and vice
versa, because condensation may occur inside the system.
f. Protect your PA-3320 against strong vibrations, which may cause hard disk
failure.
g. Do not place the system too close to any radio-active device. Radio-active
device may cause signal interference.
h. Always shutdown the operation system before turning off the power.
3. Handling
a. Avoid placing heavy objects on the top of the system.
b. Do not turn the system upside down. This may cause the hard drive to
malfunction.
c. Do not allow any objects to fall into this product.
d. If water or other liquid spills into the product, unplug the power cord
immediately.

Chapter 1 Introduction
PA-3320 USER ′ S MANUAL Page: 1-7
4. Good Care
a. When the outside case gets stained, remove the stains using neutral washing
agent with a dry cloth.
b. Never use strong agents such as benzene and thinner to clean the surface of
the case.
c. If heavy stains are present, moisten a cloth with diluted neutral washing
agent or alcohol and then wipe thoroughly with a dry cloth.
d. If dust is accumulated on the case surface, remove it by using a special
vacuum cleaner for computers.

Page 2-1
SYSTEM
CONFIGURATION
Helpful information that describes the jumper and connector
settings, and component locations.
Sections included:
Jumper & Connector Quick Reference Table
Component Locations
Configuration and Jumper settings
Connector Pin Assignments
CHAPTER
2

Chapter 2 System Configuration
Page: 2-2 PA-3320 SERIES USER
’ S MANUAL
2-1. JUMPER & CONNECTOR QUICK REFERENCE TABLE
JUMPER/CONNECTOR NAME PAGE
COM Port & VGA Connector COM1, COM3, COM4-1, COM4-2,
JVGACOM2
2-7
COM Port RI and Voltage Selection JP_COM1, JP_COM2, JP_COM3,
JP_COM4
2-9
MINI-DIM and USB Connector JPS2USB1, USB5, USB67 2-10
LAN & USB Connector JRJ45USB1 2-11
Cash Drawer Connector DRW1 2-12
Cash Drawer Power Selection JP14 2-13
Backlight Type Selection JP21 2-13
Power LED Connector LED-1, LED-2, 2-14
Fan Connector FAN1, FAN2 2-15
Power Connector FAN3 2-15
Reset Switch Connector RST_SW1 2-16
Power for Thermal printer Connector PRT_PWR1 2-16
External Speaker Connector SPK1 2-16
Inverter Connector INV1, INV2 2-17
MSR/Card Reader Connector PS2 2-18
LVDS Connector LVDS1, LVDS2 2-18
LVDS Voltage Selection JP7 2-20
SATA Connector SATA1, SATA2, SATA3 2-20
SATA Power Connector JPWR_4P1, JPWR_4P2 2-21
Touch Panel Connector TOUCH1, TOUCH2 2-22
Clear CMOS Data Selection JP1 2-22
Compact Flash Connector CF1 2-23
Printer Connector LPT1 2-24
Watch Dog Function Selection JP9 2-25
I-Button Connector and I-Button
Function Selection
JI-BUTTON1, JP17, JP18, JP19 2-25

Chapter 2 System Configuration
PA-3320 SERIES USER ’ S MANUAL Page: 2-3
2-2. COMPONENT LOCATIONS
M/B: PROX-A6620LF
ICH8M D525
SIO
BAT1
BZ1
CF1
9
10
1
2
J4
7 8
1 2
JP12
JI-BUTTON1
JP18
1
3
JP17
1
3
JP19
6
1
5
JP_COM1
6
2
JP_COM3
14
JPWR_4P1
JPWR_4P2
14
2
JP9
4
13
SATA1
1
7
SATA2
1
7
5
6
1
2
JP_COM2
1
2
JP10
1
4
9
1314
12
8 5
JPS2USB1
1
2
9
10
A1 A4
B1 B4
JRJ45USB1
14 11
21 24
2016
JVGACOM2
5
10
15
1
6
11
DRW1
1
2
10
9
COM3
1
6 9
5
COM1
1
2
5
61 2
PWR_OUT1
12
3
4
PWR_IN1
PRT_PWR1
1 4
BAT_PWR1
1
4
BAT_PWR2
1
6 1
JP20
1
USB5
COM4-1
91
10 2 5
6
1
2
JP_COM4
1
74
2
73
72 71
204 203
DIMM1
5
6
1
2
JP7
1
2
30
29
LVDS2
1
2 20
19
LVDS1
2 1
JP13
SW1
12
1
TOUCH1
LED-1
1
2
LED-2
14
INV1
17
3
1
JP21
JINVDRV1
1
2
FAN2
1
FAN1
1
2
1
2
3
4
SW2
LPT1
26
13
14
1
PS2
16
SPK1
1
2
TOUCH2
15
FAN3
12
INV2
RST_SW1
12
COM4-2
10 2
91
10 2
USB67
149 1
SATA3
1
7
9
21
1
3
JP1
13
JP14
1
5
PA-3320 Mainboard Front Connector, Jumper and Component locations

Chapter 2 System Configuration
Page: 2-4 PA-3320 SERIES USER
’ S MANUAL
M_PCIE1
12
15 16
17 18
51 52
PA-3320 Mainboard Rear Connector, Jumper and Component locations

Chapter 2 System Configuration
PA-3320 SERIES USER ’ S MANUAL Page: 2-5
2-3. HOW TO SET THE JUMPERS
You can configure your board by setting the jumpers. Jumper is consists of two or
three metal pins with a plastic base mounted on the card, and by using a small plastic
"cap", Also known as the jumper cap (with a metal contact inside), you are able to
connect the pins. So you can set-up your hardware configuration by "opening"or
"closing"pins.
The jumper can be combined into sets that called jumper blocks. When the jumpers
are all in the block, you have to put them together to set up the hardware
configuration. The figure below shows how this looks like.
JUMPERS AND CAPS
If a jumper has three pins for example, labelled PIN1, PIN2, and PIN3. You can
connect PIN1 & PIN2 to create one setting and shorting. You can either connect
PIN2 & PIN3 to create another setting. The same jumper diagrams are applied all
through this manual. The figure below shows what the manual diagrams look and
what they represent.

Chapter 2 System Configuration
Page: 2-6 PA-3320 SERIES USER
’ S MANUAL
JUMPER DIAGRAMS
JUMPER SETTINGS

Chapter 2 System Configuration
PA-3320 SERIES USER ’ S MANUAL Page: 2-7
2-4. COM PORT & VGA CONNECTOR
There are four COM ports enhanced in this board namely: COM1, COM3, COM4
and JVGACOM2.
Caution: When using a 72W power adaptor, do not set the voltage at “12V” for
three COM ports or above; otherwise, the system may shut down due to power
deficiency.
COM1: COM1 Connector
The pin assignments are as follows:
PIN ASSIGNMENT PIN ASSIGNMENT
1 DCD2 6 DSR2
2 RXD2 7 RTS2
3 TXD2 8 CTS2
4 DTR2 9 RI/+5V/+12V
selectable
5 GND
COM3: COM3 Connector
The pin assignments are as follows:
PIN ASSIGNMENT PIN ASSIGNMENT
1 DCD3 6 DSR3
2 RXD3 7 RTS3
3 TXD3 8 CTS3
4 DTR3 9 RI / +5V / +12V
selectable
5 GND 10 NC
5
1
96
COM1
COM3