RAB FFLEDXS User manual
INSTRUCTIONS
FIELD-ADJUSTABLE FFLED® INSTALLATION
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
WARNING: Make certain power is OFF before installing the xture. No user serviceable parts inside.
Pivot Bolts
(Suitable for FFLEDXS, FFLEDS, FFLEDM Only) (Suitable for FFLEDM, FFLEDL Only))
Knuckle Mount
Locking Screw
Locking Screws
1. Loosen the Pivot Bolts and angle Locking Screws (Fig. 2).
2.
3. Tighten Pivot Bolts and angle Locking Screws.
1. Seal Knuckle Threads
(not provided).
2.
(supplied by other).
3.
4. Knuckle
Locking Screw and adjust Fixture to desired angle (Fig. 1).
Knuckle Threads
INSTRUCTIONS
FIELD-ADJUSTABLE FFLED® INSTALLATION
Set Screws
Locking
Bolt
(Suitable for FFLEDM, FFLEDL Only))
WARNING: RISK OF SERIOUS INJURY OR DEATH!
DO NOT MOUNT THE SLIPFITTER TO A TENON OR BRACKET
THAT IS 20 DEGREES FROM VERTICAL. MOUNTING ANY
ANGLE OTHER THAN 0-20 DEGREES INCREASES THE RISK
OF DISENGAGEMENT AND/OR FAILURE OF THE SLIPFITTER.
INSTALL THE POLE ON A SECURE BASE OR INSTALL THE
BRACKET TO A WALL FIRST, THEN PLACE LUMINAIRE
ONTO THE POLE OR BRACKET. DO NOT LIFT ASSEMBLED
LUMINAIRE OR POLE OR LUMINAIRE & BRACKET.
LUMINAIRE OR POLE/BRACKET MAY DISENGAGE.
Screws (4)
Back Plate
Power (W) Selector Switch
Color Temperature (CCT) Selector Switch
Sliptter
Tenon
FIELD ADJUSTMENT
Fixture Color Temperature
(CCT )Power (W)
1. Remove Fixture Back PlateScrews (4)
2. Locate the Selector Switches on the Fixture Back Plate as
3. Select Color Temperature (CCT)Power (W)
4. Fixture Back Plate and Screws (4).
1. The Sliptter Tenon. Place the
Sliptter over the Tenon and secure the Fixture
Set ScrewsSliptter (Fig. 3).
2. Loosen the Locking Bolt
3. Tighten the Locking Bolt.
Power (w) Selector Switch
INSTRUCTIONS
FIELD-ADJUSTABLE FFLED® INSTALLATION
Note: These instructions do not cover all details or variations in equipment nor do they provide for every possible situation during installation, operation or maintenance.
FFLED FA-IN 1022
Easy Answers
rablighting.com
Visit our website for product info
Tech Help Line
Call our experts: 888 722-1000
e-mail
Free Lighting Layouts
Answered online or by request
© 2022 RAB LIGHTING Inc.
RAB WARRANTY: RAB’s warranty is subject to all terms and conditions found at rablighting.com/warranty.
PINK
LIGHT
FIXTURE
Vaux 12V
YELLOW
GROUND
GROUND
( - ) DIM V
( + ) DIM V
COMMON
LINE BLACK
WHITE
PURPLE
P-100091-RAB
CAUTION: Be sure xture temperature is cool enough to
touch. Do not clean or maintain while xture is energized.
1.
2.
LED.
1.
2.
3.
/480V
1. LINE
2. COMMON
3. GROUND
4.
5.
6.
This manual suits for next models
3
Other RAB Lighting Equipment manuals
