Rapid Racking Cambro shelving User manual

Cambro shelving
Assembly instruction
AIS011

CAMBRO SHELVING Multiple sizes
IMPORTANT - ASSEMBLY INSTRUCTIONS
AIS011
1Assemble upright frames Ato side beams D.
2Fit front and rear beams Bto upright frames A.
For the Starter Bay pack start at the bottom
fixing the bottom beam to the second notch.
Leave 4 clear notches between the bottom and
first beam, 3 clear notches between the first and
second beam then 3 clear notches to the third
beam.
3Add shelves Cto front and rear beams B.
NB. To prevent damage to the beams, only lightly
tap with a mallet when assembling the unit.
ASSEMBLY
Tools required: Rubber mallet
A
Add on Bay
A
B
B
C
D
DStarter bay shown
We advise the use of protective
gloves and goggles, or eyeglasses
when assembling this product.
If you have any problems whatsoever please call 01285 686868 where a team of experts will be pleased to help.

Uprights - 1500 mm or 1800 mm
COMPONENTS
CAMBRO SHELVING Multiple sizes
IMPORTANT - ASSEMBLY INSTRUCTIONS
AIS011
ABFront and rear beams
4 per starter unit
2 per add on unit
Keep heavier items
on the bottom shelves
Do not climb
on your shelving
Make sure it is on a
level and even floor
Keep your
shelving dry
SAFETY
Available in various widths to suit
from 900mm to 1200mm.
8 of
CSteel slotted grill shelves
Available in various widths and
depths to suit.
DSide beam supports
4 per starter unit
2 per add on unit
If you have any problems whatsoever please call 01285 686868 where a team of experts will be pleased to help.